AIX

CATIA® Solutions Version 4
AIX

Release 2.2

5628-ACA

Document Number xxxx-yyyy-zz

Printed in U.S.A.
Note!

Before using this information and the product it supports, be sure to read the general information under "Notices".

This program directory, dated August 1999, applies to CATIA Solutions Version 4 Release 2.2 , Program Number 5628-ACA for the following:
COMPIDs
Feature Numbers
System Name
562610000
3410, 3407, 3431
AIX

A form for reader's comments appears at the back of this publication. When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any way it believes appropriate without incurring any obligation to you. Licensed Materials - Program Property of IBM.

Note to US Government Users - Documentation related to restricted rights - Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.

© Copyright DASSAULT SYSTEMES SA 1997.


Table of Contents

Figures

Notices

  • Trademarks and Service Marks
  • Introduction

    Program Materials

  • Basic Machine-Readable Material
  • Optional Machine-Readable Material
  • Program Publications
  • Known problems with FrameViewer
  • Basic Program Publications
  • Optional Program Publications
  • Microfiche Support
  • Publications Useful During Installation
  • List of Documentation
  • Program Support

  • Preventive Service Planning
  • Statement of Support Procedures
  • Installation Requirements and Considerations

  • System Requirements
  • Operating System Requirements
  • Machine Requirements
  • Programming Requirements
  • DASD Storage Requirements
  • Program Considerations
  • Installation Instructions

  • Installing CATIA Solutions
  • Overview
  • Installation on previously installed lower CATIA levels
  • Known problem during CATIA 420 refresh 1 installation
  • NLS Considerations
  • migration of user FONTDATAs to FONT and FONT CODE
  • PROJECT File for National Language Support
  • NLS Motif Resource Files and Multi-Platform Environment
  • Motif Input Considerations for TEXTD2
  • Motif fonts for Quick Text in DBCS environment
  • AIX 4.3.2 and Japanese language support
  • Euro Character Support
  • NT Compatibility in file names
  • SOLIDE function considerations
  • SOLIDE function considerations
  • SOLIDE function considerations
  • CATIA.Assembly Modeling
  • Support of IBM License Use Management
  • Catlicst command
  • IPA product considerations
  • Euclid Styler to CATIA V4
  • STF product considerations
  • SHD product considerations
  • Activating CATIA Solutions
  • Service Instructions

    Program and Service Level Information

  • Program Level Information
  • APAR list sorted by CATIA Function name
  • APAR List sorted by Alphanumerical order and their Abstract
  • Reader's Comments


    Figures


    Notices

    References in this document to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program, or service is not intended to state or imply that only IBM's product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe on any of IBM's intellectual property rights may be used instead of the IBM product, program, or service. Evaluation and verification of operation in conjunction with other products, except those expressly designated by IBM, is the user's responsibility.

    IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to the

    IBM Director of Commercial Relations
    IBM Corporation
    Purchase, NY 10577

    Trademarks and Service Marks

    The following terms, denoted by an asterisk (*) on their first occurrence in this document, are trademarks or service marks of IBM Corporation in the United States or other countries:

    IBM
    AIX
    IBMLink
    

    The following terms, denoted by a double asterisk (**) on their first occurrence in this document, are trademarks of other companies as follows:

    CATIA®
    is a registered trademark of DASSAULT SYSTEMES SA, and in Canada, IBM is the registered user under no. RU 81167.

    Additional legal issues:
    "this software is based in part on the work of the Independent JPEG Group".


    Introduction

    This program directory is intended for the system programmer responsible for program installation and maintenance. It contains information concerning the material and procedures associated with the installation of CATIA Solutions. You should read all of this program directory before installing the program and then keep it for future reference.

    The program directory contains the following sections:

    Before installing CATIA Solutions, read "Preventive Service Planning". This section tells you how to find any updates to the information and procedures in this program directory.


    Program Materials

    An IBM program is identified by a program number and a feature code. The program number for CATIA Solutions is 5628-ACA.

    The program announcement material describes the features supported by CATIA Solutions. Ask your IBM marketing representative for this information if you have not already received a copy.

    The following sections identify:


    Basic Machine-Readable Material

    The distribution medium for this program is one 8mm tape, two CD-ROMs or one 4mm tape. The media contain all the programs and data needed for installation.

    These distribution media are stacked media. Please keep these media for future use. You will have to use them if you order new products. See "Installation Instructions" for more information about how to install the program. Table 1 describes the media. Table 2 describes the media contents.

    Table 1. Basic Material: Program Tape
    Medium Feature Number Physical Volume External Label Identification  
    CD-ROM 3410 - Mechanical_AIX_1/2
    - - - Mechanical_AIX_2/2
    8mm Tape 3407 - Mech_&_AEC_AIX_1/1
    4mm Tape 3431 - Mech_&_AEC_AIX_1/1

    Table 2. Program Tape: File Content
    Identifier Type Size (in bytes) Checksum
    A1A0
    code
    3706880
    19743 3620
    A7A0
    code
    983040
    14608 960
    A8A0
    code
    8058880
    37180 7870
    A9A0
    code
    40960
    48638 40
    AAA0
    code
    839680
    25991 820
    ABA0
    code
    798720
    13832 780
    ACA0
    code
    2396160
    26102 2340
    ADA0
    code
    1669120
    47320 1630
    AFA0
    code
    71680
    01032 70
    AGA0
    code
    952320
    07751 930
    AIA0
    code
    6072320
    35054 5930
    AMA0
    code
    102400
    20786 100
    APA0
    code
    51200
    02491 50
    ARA0
    code
    1536000
    41657 1500
    AWA0
    code
    163840
    17734 160
    AXA0
    code
    296960
    50473 290
    AYA0
    code
    1116160
    15303 1090
    BIA0
    code
    122880
    53759 120
    BMA0
    code
    2703360
    47047 2640
    BRA0
    code
    6031360
    34231 5890
    BXA0
    code
    4167680
    20160 4070
    C0A0
    code
    1423360
    39145 1390
    C1A0
    code
    4730880
    40306 4620
    C2A0
    code
    30720
    23720 30
    C3A0
    code
    1259520
    25510 1230
    C4A0
    code
    4290560
    38962 4190
    C5A0
    code
    2088960
    59684 2040
    C6A0
    code
    849920
    34700 830
    C7A0
    code
    20480
    15954 20
    C8A0
    code
    2580480
    29106 2520
    C9A0
    code
    4126720
    44561 4030
    CAA0
    code
    13690880
    03562 13370
    CBA0
    code
    10280960
    55186 10040
    CDA0
    code
    10240
    27424 10
    CEA0
    code
    1925120
    35039 1880
    CFA0
    code
    122880
    44015 120
    CIA0
    code
    71680
    32704 70
    CJA0
    code
    20480
    29225 20
    CKA0
    code
    1351680
    37402 1320
    CLA0
    code
    174080
    17748 170
    CNA0
    code
    20480
    31781 20
    COA0
    code
    706560
    60781 690
    CPA0
    code
    3112960
    34855 3040
    CQA0
    code
    1157120
    36951 1130
    CRA0
    code
    1935360
    23091 1890
    CSA0
    code
    4096000
    18196 4000
    CVA0
    code
    4997120
    58585 4880
    DEA0
    code
    8079360
    24744 7890
    EMA0
    code
    19640320
    18251 19180
    F1A0
    code
    563200
    58697 550
    F2A0
    code
    1228800
    40979 1200
    F3A0
    code
    931840
    09557 910
    F4A0
    code
    1812480
    50509 1770
    F6A0
    code
    348160
    36224 340
    F8A0
    code
    1290240
    45519 1260
    F9A0
    code
    307200
    32639 300
    FAA0
    code
    5027840
    40423 4910
    FBA0
    code
    1085440
    53542 1060
    FCA0
    code
    440320
    41553 430
    FDA0
    code
    450560
    44004 440
    FEA0
    code
    593920
    19553 580
    FFA0
    code
    409600
    30336 400
    FGA0
    code
    174080
    47621 170
    FHA0
    code
    563200
    14662 550
    FIA0
    code
    8775680
    41706 8570
    FJA0
    code
    6656000
    44715 6500
    FKA0
    code
    5181440
    63231 5060
    FLA0
    code
    307200
    49885 300
    FPA0
    code
    501760
    13890 490
    FSA0
    code
    266240
    20003 260
    FTA0
    code
    2897920
    12402 2830
    FUA0
    code
    143360
    37572 140
    FVA0
    code
    296960
    02841 290
    FWA0
    code
    2078720
    46316 2030
    G1A0
    code
    215040
    30470 210
    G2A0
    code
    184320
    11474 180
    G3A0
    code
    2211840
    26341 2160
    G6A0
    code
    993280
    31036 970
    GFA0
    code
    389120
    16831 380
    GHA0
    code
    1689600
    01279 1650
    GIA0
    code
    10240
    21489 10
    GLA0
    code
    430080
    60733 420
    GPA0
    code
    2580480
    47577 2520
    HMA0
    code
    563200
    48346 550
    I0A0
    code
    3594240
    21066 3510
    I5A0
    code
    1495040
    43685 1460
    I6A0
    code
    542720
    14132 530
    I9A0
    code
    1679360
    42710 1640
    IAA0
    code
    4096000
    59075 4000
    IBA0
    code
    1464320
    11599 1430
    ICA0
    code
    102400
    41568 100
    IDA0
    code
    3307520
    40673 3230
    IEA0
    code
    839680
    33180 820
    IGA0
    code
    15534080
    31774 15170
    IHA0
    code
    358400
    64665 350
    INA0
    code
    61440
    50885 60
    J6A0
    code
    20480
    62347 20
    J7A0
    code
    7505920
    48821 7330
    J8A0
    code
    4925440
    51812 4810
    J9A0
    code
    1269760
    39852 1240
    JAA0
    code
    92160
    58693 90
    JBA0
    code
    460800
    12580 450
    JCA0
    code
    81920
    28443 80
    JDA0
    code
    952320
    00274 930
    JEA0
    code
    337920
    22773 330
    JFA0
    code
    71680
    29365 70
    JGA0
    code
    1884160
    14032 1840
    JHA0
    code
    491520
    48697 480
    JIA0
    code
    1208320
    03587 1180
    JJA0
    code
    30720
    11292 30
    JKA0
    code
    655360
    26023 640
    JMA0
    code
    1208320
    56461 1180
    JNA0
    code
    716800
    17160 700
    JPA0
    code
    491520
    52162 480
    JUA0
    code
    501760
    42642 490
    JYA0
    code
    419840
    32155 410
    K1A0
    code
    1280000
    37810 1250
    K2A0
    code
    2160640
    30186 2110
    KAA0
    code
    245760
    18520 240
    KCA0
    code
    368640
    55779 360
    KMA0
    code
    1239040
    03700 1210
    KOA0
    code
    430080
    38496 420
    KPA0
    code
    8017920
    10174 7830
    KRA0
    code
    3184640
    59771 3110
    KSA0
    code
    327680
    10776 320
    L1A0
    code
    1024000
    32470 1000
    L2A0
    code
    1310720
    47363 1280
    L7A0
    code
    2457600
    27571 2400
    L8A0
    code
    1484800
    54004 1450
    L9A0
    code
    327680
    07359 320
    LEA0
    code
    1146880
    22113 1120
    LLA0
    code
    71680
    51719 70
    LXA0
    code
    3717120
    28113 3630
    N1A0
    code
    1914880
    14740 1870
    N2A0
    code
    778240
    11572 760
    N3A0
    code
    9697280
    51328 9470
    N4A0
    code
    81920
    47356 80
    N5A0
    code
    3205120
    37858 3130
    N7A0
    code
    3348480
    50838 3270
    N9A0
    code
    10240
    65467 10
    NAA0
    code
    20480
    65445 20
    NBA0
    code
    2334720
    34326 2280
    NCA0
    code
    2211840
    49848 2160
    NDA0
    code
    1587200
    05609 1550
    NEA0
    code
    1669120
    61656 1630
    NFA0
    code
    133120
    07915 130
    NGA0
    code
    8478720
    62176 8280
    NHA0
    code
    2969600
    24744 2900
    NJA0
    code
    3614720
    24948 3530
    NLA0
    code
    2508800
    18288 2450
    NMA0
    code
    3819520
    14290 3730
    NNA0
    code
    972800
    15441 950
    NOA0
    code
    706560
    60418 690
    NQA0
    code
    13414400
    34300 13100
    NSA0
    code
    327680
    00943 320
    NTA0
    code
    1454080
    45362 1420
    NUA0
    code
    3246080
    17919 3170
    NVA0
    code
    1699840
    59226 1660
    NXA0
    code
    102400
    33195 100
    NYA0
    code
    645120
    05178 630
    NZA0
    code
    727040
    08179 710
    O1A0
    code
    1484800
    27560 1450
    O2A0
    code
    757760
    48451 740
    O3A0
    code
    583680
    26324 570
    O4A0
    code
    143360
    08204 140
    O5A0
    code
    634880
    63082 620
    O6A0
    code
    1331200
    36026 1300
    O7A0
    code
    358400
    25407 350
    O8A0
    code
    1454080
    07559 1420
    OAA0
    code
    92160
    26227 90
    OBA0
    code
    30720
    58112 30
    OCA0
    code
    1075200
    62848 1050
    ODA0
    code
    8990720
    43332 8780
    OEA0
    code
    30720
    03613 30
    OGA0
    code
    645120
    24838 630
    OLA0
    code
    6082560
    17891 5940
    OMA0
    code
    9205760
    04398 8990
    OSA0
    code
    10301440
    32181 10060
    OXA0
    code
    471040
    00241 460
    PAA0
    code
    296960
    18565 290
    PBA0
    code
    1372160
    14394 1340
    PCA0
    code
    1351680
    18036 1320
    PDA0
    code
    9144320
    64715 8930
    PEA0
    code
    655360
    54987 640
    PFA0
    code
    266240
    34141 260
    PGA0
    code
    8028160
    14874 7840
    PHA0
    code
    430080
    62371 420
    PIA0
    code
    6737920
    18265 6580
    PJA0
    code
    194560
    62370 190
    PLA0
    code
    3256320
    10342 3180
    PNA0
    code
    1269760
    52780 1240
    PPA0
    code
    225280
    39192 220
    PRA0
    code
    1290240
    39480 1260
    PUA0
    code
    880640
    31404 860
    PVA0
    code
    143360
    43477 140
    PXA0
    code
    27760640
    18277 27110
    Q0A0
    code
    901120
    39690 880
    Q1A0
    code
    1730560
    01380 1690
    Q4A0
    code
    706560
    38493 690
    Q5A0
    code
    1239040
    52341 1210
    Q7A0
    code
    542720
    48852 530
    QEA0
    code
    860160
    22907 840
    QGA0
    code
    337920
    15106 330
    QHA0
    code
    122880
    18660 120
    QIA0
    code
    737280
    50597 720
    QPA0
    code
    1484800
    14145 1450
    QRA0
    code
    3635200
    40742 3550
    R0A0
    code
    143360
    42201 140
    R2A0
    code
    2467840
    20654 2410
    R3A0
    code
    532480
    41559 520
    R4A0
    code
    40632320
    49799 39680
    R6A0
    code
    583680
    58542 570
    R7A0
    code
    184320
    33744 180
    R8A0
    code
    92160
    31319 90
    R9A0
    code
    204800
    32505 200
    RAA0
    code
    4290560
    60768 4190
    RBA0
    code
    389120
    44736 380
    RCA0
    code
    1024000
    07292 1000
    RDA0
    code
    358400
    50681 350
    REA0
    code
    1843200
    08899 1800
    RFA0
    code
    3409920
    57954 3330
    RGA0
    code
    450560
    17431 440
    RHA0
    code
    1290240
    34823 1260
    RJA0
    code
    2150400
    03897 2100
    RKA0
    code
    1740800
    19995 1700
    RNA0
    code
    1454080
    10034 1420
    RQA0
    code
    870400
    24877 850
    RRA0
    code
    706560
    51748 690
    RSA0
    code
    204800
    10765 200
    RTA0
    code
    645120
    54601 630
    RVA0
    code
    481280
    49237 470
    RWA0
    code
    358400
    61541 350
    S1A0
    code
    51200
    11929 50
    S2A0
    code
    61440
    41808 60
    S3A0
    code
    51200
    54988 50
    S4A0
    code
    40960
    24542 40
    SAA0
    code
    2549760
    00127 2490
    SCA0
    code
    563200
    45653 550
    SDA0
    code
    51200
    08629 50
    SFA0
    code
    4730880
    02164 4620
    SHA0
    code
    593920
    62847 580
    SIA0
    code
    10240
    03482 10
    SKA0
    code
    552960
    02314 540
    SLA0
    code
    2580480
    23038 2520
    SMA0
    code
    143360
    00143 140
    SNA0
    code
    378880
    33657 370
    SQA0
    code
    931840
    55574 910
    SRA0
    code
    348160
    09965 340
    SSA0
    code
    153600
    40297 150
    SUA0
    code
    378880
    48886 370
    SWA0
    code
    4771840
    28221 4660
    SXA0
    code
    2099200
    34204 2050
    SYA0
    code
    983040
    16623 960
    T1A0
    code
    645120
    51532 630
    TBA0
    code
    2877440
    60396 2810
    TEA0
    code
    5959680
    58140 5820
    TFA0
    code
    1464320
    64830 1430
    TIA0
    code
    675840
    50859 660
    TTA0
    code
    2375680
    40218 2320
    U0A0
    code
    184320
    65474 180
    U1A0
    code
    92160
    61757 90
    U3A0
    code
    942080
    07167 920
    U4A0
    code
    102400
    64402 100
    U8A0
    code
    1136640
    45894 1110
    UAA0
    code
    512000
    54748 500
    UBA0
    code
    481280
    51838 470
    UCA0
    code
    1720320
    01120 1680
    UEA0
    code
    1689600
    09207 1650
    UGA0
    code
    1751040
    15629 1710
    UHA0
    code
    1843200
    51839 1800
    USA0
    code
    2713600
    46952 2650
    UVA0
    code
    358400
    26952 350
    UWA0
    code
    6092800
    51025 5950
    UXA0
    code
    921600
    58552 900
    UYA0
    code
    7966720
    53404 7780
    UZA0
    code
    1525760
    41736 1490
    V0A0
    code
    5283840
    11620 5160
    V5A0
    code
    71680
    43888 70
    V7A0
    code
    225280
    29183 220
    V8A0
    code
    4976640
    25398 4860
    V9A0
    code
    30720
    23770 30
    VBA0
    code
    5406720
    47830 5280
    VDA0
    code
    1290240
    38084 1260
    VEA0
    code
    7342080
    37538 7170
    VJA0
    code
    122880
    31357 120
    VKA0
    code
    829440
    03079 810
    VLA0
    code
    235520
    52792 230
    VMA0
    code
    727040
    26202 710
    VOA0
    code
    286720
    42943 280
    VPA0
    code
    768000
    56282 750
    VRA0
    code
    1699840
    25500 1660
    VSA0
    code
    153600
    55303 150
    W1A0
    code
    1566720
    37427 1530
    WAA0
    code
    2068480
    02839 2020
    WFA0
    code
    1556480
    60332 1520
    WGA0
    code
    4096000
    56337 4000
    WIA0
    code
    491520
    26088 480
    WJA0
    code
    18196480
    11885 17770
    WMA0
    code
    2959360
    36543 2890
    WOA0
    code
    61440
    46916 60
    Y0A0
    code
    112640
    35522 110
    Y8A0
    code
    174080
    30345 170
    YCA0
    code
    399360
    09667 390
    YFA0
    code
    675840
    20861 660
    YJA0
    code
    378880
    45987 370
    YRA0
    code
    204800
    32235 200
    YYA0
    code
    1024000
    61945 1000
    A1A0
    demo
    358400
    09058 350
    A8A0
    demo
    184320
    19425 180
    C0A0
    demo
    6062080
    39424 5920
    C3A0
    demo
    1064960
    09388 1040
    C7A0
    demo
    35471360
    24479 34640
    CQA0
    demo
    4720640
    61208 4610
    CSA0
    demo
    20480
    56926 20
    FJA0
    demo
    20480
    22007 20
    FTA0
    demo
    829440
    42232 810
    GFA0
    demo
    143360
    38263 140
    GHA0
    demo
    378880
    62840 370
    IAA0
    demo
    81920
    32623 80
    IGA0
    demo
    15728640
    58206 15360
    JAA0
    demo
    122880
    39656 120
    JJA0
    demo
    512000
    39420 500
    L7A0
    demo
    25425920
    11306 24830
    LXA0
    demo
    26511360
    33113 25890
    N1A0
    demo
    245760
    28463 240
    N7A0
    demo
    1054720
    48419 1030
    NHA0
    demo
    153600
    14520 150
    NMA0
    demo
    81920
    20497 80
    O8A0
    demo
    20480
    19640 20
    OXA0
    demo
    184320
    38845 180
    PPA0
    demo
    317440
    10814 310
    R4A0
    demo
    1802240
    08791 1760
    SUA0
    demo
    655360
    51364 640
    SXA0
    demo
    10240
    13225 10
    WJA0
    demo
    7587840
    08069 7410
    ABAS420
    code
    20480
    55945 20
    ADPS420
    code
    20480
    11841 20
    ADRS420
    code
    20480
    02372 20
    ADWS420
    code
    20480
    34215 20
    ANIS420
    code
    20480
    32747 20
    ANSS420
    code
    20480
    26353 20
    APDS420
    code
    20480
    37940 20
    ARWS420
    code
    20480
    21211 20
    ASAS420
    code
    20480
    35480 20
    ASSS420
    code
    20480
    57573 20
    ASUS420
    code
    20480
    46308 20
    ATTS420
    code
    20480
    28588 20
    AVMS420
    code
    20480
    58188 20
    BDGS420
    code
    20480
    32892 20
    BWTS420
    code
    20480
    32840 20
    CAIS420
    code
    20480
    55725 20
    CASS420
    code
    20480
    45443 20
    CCCS420
    code
    20480
    17563 20
    CDAS420
    code
    20480
    40925 20
    CDBS420
    code
    20480
    64805 20
    CDPS420
    code
    20480
    26107 20
    CDRS420
    code
    20480
    20802 20
    CDSS420
    code
    20480
    08401 20
    CGOS420
    code
    20480
    43253 20
    CGWS420
    code
    20480
    27508 20
    CKES420
    code
    20480
    38150 20
    COMS420
    code
    20480
    00577 20
    COVS420
    code
    20480
    38342 20
    CVSS420
    code
    20480
    08182 20
    DEVS420
    code
    20480
    25250 20
    DR2S420
    code
    20480
    07073 20
    DRAS420
    code
    20480
    24411 20
    DRLS420
    code
    20480
    24147 20
    DROS420
    code
    20480
    06958 20
    DRSS420
    code
    20480
    11316 20
    DXFS420
    code
    20480
    09742 20
    DYSS420
    code
    20480
    17722 20
    ELDS420
    code
    20480
    26196 20
    ELFS420
    code
    20480
    40455 20
    ELGS420
    code
    20480
    01423 20
    ELWS420
    code
    20480
    30114 20
    ENGS420
    code
    20480
    05277 20
    EQTS420
    code
    20480
    55301 20
    FDTS420
    code
    20480
    29903 20
    FEAS420
    code
    20480
    05941 20
    FEMS420
    code
    20480
    16804 20
    FITS420
    code
    20480
    25331 20
    FONS420
    code
    20480
    63538 20
    FRFS420
    code
    20480
    43483 20
    GCCS420
    code
    20480
    29653 20
    GCMS420
    code
    20480
    24117 20
    GEOS420
    code
    20480
    61103 20
    GIIS420
    code
    20480
    22891 20
    GPDS420
    code
    20480
    62479 20
    GPOS420
    code
    20480
    52805 20
    GPSS420
    code
    20480
    00718 20
    GSAS420
    code
    20480
    01831 20
    GSDS420
    code
    20480
    43872 20
    GSMS420
    code
    20480
    49020 20
    IGCS420
    code
    20480
    33799 20
    IGIS420
    code
    20480
    51380 20
    IGSS420
    code
    20480
    13295 20
    IMDS420
    code
    20480
    38166 20
    IPAS420
    code
    20480
    11320 20
    ISOS420
    code
    20480
    05196 20
    KINS420
    code
    20480
    31625 20
    LIBS420
    code
    20480
    55615 20
    LICS420
    code
    20480
    18090 20
    LMPS420
    code
    20480
    27832 20
    MAAS420
    code
    20480
    51788 20
    MADS420
    code
    20480
    39205 20
    MMPS420
    code
    20480
    28626 20
    N4DS420
    code
    20480
    44164 20
    NASS420
    code
    20480
    53458 20
    NC3S420
    code
    20480
    33529 20
    NC5S420
    code
    20480
    08237 20
    NCBS420
    code
    20480
    00891 20
    NCRS420
    code
    20480
    17071 20
    NESS420
    code
    20480
    60784 20
    PA3S420
    code
    20480
    31302 20
    PBGS420
    code
    20480
    11038 20
    PIDS420
    code
    20480
    07645 20
    PMAS420
    code
    20480
    13653 20
    PMPS420
    code
    20480
    41263 20
    PPBS420
    code
    20480
    36849 20
    RASS420
    code
    20480
    39322 20
    RENS420
    code
    20480
    57910 20
    ROCS420
    code
    20480
    29799 20
    ROSS420
    code
    20480
    10294 20
    SAIS420
    code
    20480
    43135 20
    SCHS420
    code
    20480
    19871 20
    SHBS420
    code
    20480
    18417 20
    SHDS420
    code
    20480
    63095 20
    SHES420
    code
    20480
    60040 20
    SHPS420
    code
    20480
    30109 20
    SMPS420
    code
    20480
    16837 20
    SOES420
    code
    20480
    38997 20
    SOMS420
    code
    20480
    14548 20
    SPAS420
    code
    20480
    36172 20
    SPDS420
    code
    20480
    12180 20
    SPMS420
    code
    20480
    37843 20
    SPNS420
    code
    20480
    17403 20
    ST1S420
    code
    20480
    03455 20
    STAS420
    code
    20480
    12184 20
    STFS420
    code
    20480
    18925 20
    STLS420
    code
    20480
    42787 20
    STMS420
    code
    20480
    13921 20
    STPS420
    code
    20480
    19812 20
    SUDS420
    code
    20480
    19149 20
    SWES420
    code
    20480
    06268 20
    TSAS420
    code
    20480
    10931 20
    TU3S420
    code
    20480
    46683 20
    TURS420
    code
    20480
    64456 20
    VSTS420
    code
    20480
    56228 20
    WF3S420
    code
    20480
    55068 20
    ABAS420
    demo
    10240
    43639 10
    ADPS420
    demo
    10240
    28036 10
    ADRS420
    demo
    10240
    02934 10
    ADWS420
    demo
    10240
    41718 10
    ANIS420
    demo
    10240
    12922 10
    ANSS420
    demo
    10240
    17190 10
    APDS420
    demo
    10240
    63859 10
    ARWS420
    demo
    10240
    50066 10
    ASAS420
    demo
    10240
    62618 10
    ASSS420
    demo
    10240
    53780 10
    ASUS420
    demo
    10240
    42142 10
    ATTS420
    demo
    10240
    63475 10
    AVMS420
    demo
    10240
    47203 10
    BDGS420
    demo
    10240
    12595 10
    BWTS420
    demo
    10240
    19421 10
    CAIS420
    demo
    10240
    11088 10
    CASS420
    demo
    10240
    23137 10
    CCCS420
    demo
    10240
    25219 10
    CDAS420
    demo
    10240
    49220 10
    CDBS420
    demo
    10240
    56627 10
    CDPS420
    demo
    10240
    19885 10
    CDRS420
    demo
    10240
    11873 10
    CDSS420
    demo
    10240
    30563 10
    CGOS420
    demo
    10240
    38337 10
    CGWS420
    demo
    10240
    42158 10
    CKES420
    demo
    10240
    48111 10
    COMS420
    demo
    10240
    61735 10
    COVS420
    demo
    10240
    45235 10
    CVSS420
    demo
    10240
    36420 10
    DEVS420
    demo
    10240
    00925 10
    DR2S420
    demo
    10240
    50004 10
    DRAS420
    demo
    10240
    53386 10
    DRLS420
    demo
    10240
    27973 10
    DROS420
    demo
    10240
    58248 10
    DRSS420
    demo
    10240
    33902 10
    DXFS420
    demo
    10240
    55793 10
    DYSS420
    demo
    10240
    48618 10
    ELDS420
    demo
    10240
    02662 10
    ELFS420
    demo
    10240
    57955 10
    ELGS420
    demo
    10240
    25274 10
    ELWS420
    demo
    10240
    50546 10
    ENGS420
    demo
    10240
    10207 10
    EQTS420
    demo
    10240
    58512 10
    FDTS420
    demo
    10240
    54921 10
    FEAS420
    demo
    10240
    47193 10
    FEMS420
    demo
    10240
    55233 10
    FITS420
    demo
    10240
    32138 10
    FONS420
    demo
    10240
    10195 10
    FRFS420
    demo
    10240
    02835 10
    GCCS420
    demo
    10240
    12271 10
    GCMS420
    demo
    10240
    32955 10
    GEOS420
    demo
    10240
    26801 10
    GIIS420
    demo
    10240
    32622 10
    GPDS420
    demo
    10240
    05171 10
    GPOS420
    demo
    10240
    06126 10
    GPSS420
    demo
    10240
    52153 10
    GSAS420
    demo
    10240
    57734 10
    GSDS420
    demo
    10240
    53654 10
    GSMS420
    demo
    10240
    15598 10
    IGCS420
    demo
    10240
    35990 10
    IGIS420
    demo
    10240
    24686 10
    IGSS420
    demo
    10240
    01931 10
    IMDS420
    demo
    10240
    56406 10
    IPAS420
    demo
    10240
    55839 10
    ISOS420
    demo
    10240
    01646 10
    KINS420
    demo
    10240
    17019 10
    LIBS420
    demo
    10240
    63431 10
    LICS420
    demo
    10240
    10733 10
    LMPS420
    demo
    10240
    63114 10
    MAAS420
    demo
    10240
    60666 10
    MADS420
    demo
    10240
    52910 10
    MMPS420
    demo
    10240
    15954 10
    N4DS420
    demo
    10240
    09838 10
    NASS420
    demo
    10240
    51656 10
    NC3S420
    demo
    10240
    18778 10
    NC5S420
    demo
    10240
    63780 10
    NCBS420
    demo
    10240
    61716 10
    NCRS420
    demo
    10240
    42072 10
    NESS420
    demo
    10240
    19622 10
    PA3S420
    demo
    10240
    22108 10
    PBGS420
    demo
    10240
    35777 10
    PIDS420
    demo
    10240
    15279 10
    PMAS420
    demo
    10240
    25664 10
    PMPS420
    demo
    10240
    46305 10
    PPBS420
    demo
    10240
    52076 10
    RASS420
    demo
    10240
    64236 10
    RENS420
    demo
    10240
    56998 10
    ROCS420
    demo
    10240
    16805 10
    ROSS420
    demo
    10240
    25527 10
    SAIS420
    demo
    10240
    21781 10
    SCHS420
    demo
    10240
    25313 10
    SHBS420
    demo
    10240
    65444 10
    SHDS420
    demo
    10240
    32385 10
    SHES420
    demo
    10240
    34217 10
    SHPS420
    demo
    10240
    03410 10
    SMPS420
    demo
    10240
    10957 10
    SOES420
    demo
    10240
    39094 10
    SOMS420
    demo
    10240
    46080 10
    SPAS420
    demo
    10240
    62419 10
    SPDS420
    demo
    10240
    55521 10
    SPMS420
    demo
    10240
    48060 10
    SPNS420
    demo
    10240
    27496 10
    ST1S420
    demo
    10240
    43317 10
    STAS420
    demo
    10240
    07143 10
    STFS420
    demo
    10240
    18674 10
    STLS420
    demo
    10240
    33873 10
    STMS420
    demo
    10240
    61765 10
    STPS420
    demo
    10240
    08521 10
    SUDS420
    demo
    10240
    60405 10
    SWES420
    demo
    10240
    18896 10
    TSAS420
    demo
    10240
    38422 10
    TU3S420
    demo
    10240
    08558 10
    TURS420
    demo
    10240
    24673 10
    VSTS420
    demo
    10240
    52064 10
    WF3S420
    demo
    10240
    65486 10
    AD1C420
    code
    30720
    51272 30
    AD2C420
    code
    30720
    29753 30
    AD3C420
    code
    30720
    43350 30
    AD5C420
    code
    30720
    31620 30
    ADDC420
    code
    30720
    55445 30
    ADVC420
    code
    30720
    56893 30
    ALAC420
    code
    51200
    44154 50
    ALMC420
    code
    61440
    17965 60
    ASCC420
    code
    30720
    31367 30
    ASDC420
    code
    30720
    04508 30
    ASHC420
    code
    30720
    40776 30
    CADC420
    code
    20480
    37748 20
    CANC420
    code
    20480
    07781 20
    DAAC420
    code
    30720
    42290 30
    DAMC420
    code
    30720
    15859 30
    DETC420
    code
    30720
    42900 30
    DRPC420
    code
    30720
    60133 30
    DWDC420
    code
    30720
    48911 30
    EEFC420
    code
    30720
    23361 30
    EEMC420
    code
    30720
    48889 30
    FAMC420
    code
    30720
    26262 30
    FANC420
    code
    30720
    54798 30
    FBDC420
    code
    30720
    08620 30
    FBPC420
    code
    30720
    06969 30
    FEIC420
    code
    30720
    17360 30
    GBWC420
    code
    30720
    38578 30
    GPAC420
    code
    20480
    03294 20
    GSHC420
    code
    30720
    05841 30
    MAMC420
    code
    30720
    20149 30
    MDMC420
    code
    30720
    14551 30
    MOKC420
    code
    30720
    13773 30
    MUMC420
    code
    30720
    19043 30
    MXMC420
    code
    30720
    61970 30
    NCLC420
    code
    30720
    63984 30
    PAIC420
    code
    30720
    09900 30
    PDBC420
    code
    30720
    61475 30
    PDDC420
    code
    30720
    40653 30
    PDGC420
    code
    30720
    33235 30
    PIPC420
    code
    30720
    17055 30
    PLDC420
    code
    40960
    32674 40
    PMDC420
    code
    40960
    11921 40
    PPDC420
    code
    30720
    20649 30
    PRDC420
    code
    30720
    54932 30
    PRMC420
    code
    30720
    59470 30
    PSAC420
    code
    30720
    48502 30
    PSDC420
    code
    30720
    07932 30
    PSHC420
    code
    30720
    36899 30
    PVMC420
    code
    30720
    16665 30
    SB5C420
    code
    30720
    25551 30
    SBDC420
    code
    30720
    44505 30
    SBPC420
    code
    30720
    65334 30
    SBVC420
    code
    30720
    06293 30
    SDAC420
    code
    30720
    03088 30
    SDDC420
    code
    30720
    00565 30
    SOLC420
    code
    30720
    46152 30
    STYC420
    code
    30720
    35695 30
    SUMC420
    code
    30720
    17217 30
    SUPC420
    code
    30720
    45760 30
    SURC420
    code
    30720
    61015 30
    TOMC420
    code
    30720
    49570 30
    TUMC420
    code
    30720
    31331 30
    ZANC420
    code
    20480
    56937 20
    ZMDC420
    code
    40960
    03946 40
    ZMGC420
    code
    30720
    42933 30
    AD1C420
    demo
    10240
    00494 10
    AD2C420
    demo
    10240
    61054 10
    AD3C420
    demo
    10240
    47597 10
    AD5C420
    demo
    10240
    49664 10
    ADDC420
    demo
    10240
    60540 10
    ADVC420
    demo
    10240
    25342 10
    ALAC420
    demo
    10240
    55268 10
    ALMC420
    demo
    10240
    21365 10
    ASCC420
    demo
    10240
    34797 10
    ASDC420
    demo
    10240
    50543 10
    ASHC420
    demo
    10240
    63745 10
    CADC420
    demo
    10240
    36533 10
    CANC420
    demo
    10240
    08921 10
    DAAC420
    demo
    10240
    56118 10
    DAMC420
    demo
    10240
    29520 10
    DETC420
    demo
    10240
    00468 10
    DRPC420
    demo
    10240
    55231 10
    DWDC420
    demo
    10240
    51541 10
    EEFC420
    demo
    10240
    49128 10
    EEMC420
    demo
    10240
    19488 10
    FAMC420
    demo
    10240
    03586 10
    FANC420
    demo
    10240
    21530 10
    FBDC420
    demo
    10240
    55226 10
    FBPC420
    demo
    10240
    53286 10
    FEIC420
    demo
    10240
    16800 10
    GBWC420
    demo
    10240
    40594 10
    GPAC420
    demo
    10240
    10073 10
    GSHC420
    demo
    10240
    65314 10
    MAMC420
    demo
    10240
    02514 10
    MDMC420
    demo
    10240
    51961 10
    MOKC420
    demo
    10240
    04720 10
    MUMC420
    demo
    10240
    24854 10
    MXMC420
    demo
    10240
    61020 10
    NCLC420
    demo
    10240
    63595 10
    PAIC420
    demo
    10240
    01279 10
    PDBC420
    demo
    10240
    62444 10
    PDDC420
    demo
    10240
    19626 10
    PDGC420
    demo
    10240
    34019 10
    PIPC420
    demo
    10240
    46910 10
    PLDC420
    demo
    10240
    29756 10
    PMDC420
    demo
    10240
    56216 10
    PPDC420
    demo
    10240
    54332 10
    PRDC420
    demo
    10240
    36001 10
    PRMC420
    demo
    10240
    62495 10
    PSAC420
    demo
    10240
    63469 10
    PSDC420
    demo
    10240
    35435 10
    PSHC420
    demo
    10240
    56915 10
    PVMC420
    demo
    10240
    14991 10
    SB5C420
    demo
    10240
    58670 10
    SBDC420
    demo
    10240
    25421 10
    SBPC420
    demo
    10240
    48554 10
    SBVC420
    demo
    10240
    49510 10
    SDAC420
    demo
    10240
    61641 10
    SDDC420
    demo
    10240
    37857 10
    SOLC420
    demo
    10240
    64072 10
    STYC420
    demo
    10240
    32404 10
    SUMC420
    demo
    10240
    33688 10
    SUPC420
    demo
    10240
    13605 10
    SURC420
    demo
    10240
    41833 10
    TOMC420
    demo
    10240
    48201 10
    TUMC420
    demo
    10240
    13364 10
    ZANC420
    demo
    10240
    27521 10
    ZMDC420
    demo
    10240
    37217 10
    ZMGC420
    demo
    10240
    03628 10


    Optional Machine-Readable Material

    There are no optional machine-readable materials for CATIA Solutions.


    Program Publications

    The following sections identify the basic and optional publications for CATIA Solutions.

    Note: On-line documentation is accessible from within or outside CATIA Solutions. This provides quick access to documentation, without the need for large paper manuals. Only one format is available:

    CATIA Solutions on-line documentation delivered in FrameViewer format can be accessed through a CATIA interactive session. The software prerequisites are the same as those required for a CATIA Solutions interactive session.

    You will find Instructions to access the documentation CDROM in the Booklet included in the CDROM jewel case.

    Known problems with FrameViewer

    
    
        Windows platforms (windows NT and windows 95) : missing fonts
    
        When you access FrameViewer documentation CD-ROM on Windows
        platforms, in some cases a warning message is displayed to inform
        that the current file contains unavailable fonts (other  local
        fonts will be used instead).
        Click on the OK button to continue the viewing.
    

    Basic Program Publications

    When ordering basic Machine-Readable material for CATIA Solutions Version 4, you receive a set of the following publications:

    Table 3. Basic Material: Unlicensed Publications
    Publication Title Form Number
    CATIA Solutions Common Publications  
    CATIA Solutions Installation Guide UNIX Workstation SH52-1189
    CATIA Solutions Installing Additional Features UNIX Workstation SH52-1223
    CATIA Solutions Application Architecture Overview SH52-0598
    CATIA Solutions Planning and Administration Guide UNIX Workstation SH52-0601
    CATIA Solutions Double-Byte Character Set Fonts SH52-1108
    Motif CATIA Solutions User's Guide SH52-0606
    CATIA Solutions Application Programming Interface Quick Reference SH52-0613
    CATIA Solutions Interactive User Access Commands Quick Reference SH52-0614
    CATIA Solutions Product Enhancement Overview SH52-1093
    CATIA.Object Manager Interactive User Access Reference Manual SH52-0611
    CATIA Solutions Data Administration and Interoperability Guide SH52-0603
    CATIA.Object Manager Utilities User's Guide SH52-0632

    The publications described below are delivered only if you have ordered the related product.

    Table 4. Material delivered with CATIA/CADAM.AEC Infrastructure (ABA)
    Publication Title Form Number
    CATIA/CADAM.AEC Base & Drawing Generation Setup Administrator's Guide SH52-1115
    CATIA/CADAM.AEC Base & Drawing Generation User's Guide SH52-1114

    Table 5. Material delivered with CATIA/CADAM.AEC Ductwork Design (ADW)
    Publication Title Form Number
    CATIA/CADAM.AEC Ductwork Design Setup Administrator's Guide SH52-1228
    CATIA/CADAM.AEC Ductwork Design User's Guide SH52-1195

    Table 6. Material delivered with CATIA/CADAM.AEC Piping Design (APD)
    Publication Title Form Number
    CATIA/CADAM.AEC Process Design User's Guide SH52-1121
    CATIA/CADAM.AEC Process Setup Administrator's Guide SH52-1229

    Table 7. Material delivered with CATIA/CADAM.AEC Raceway Design (ARW)
    Publication Title Form Number
    CATIA/CADAM.AEC Raceway Design Setup Administrator's Guide SH52-1297
    CATIA/CADAM.AEC Raceway Design User's Guide SH52-1298

    Table 8. Material delivered with CATIA.Assembly Modeling (ASS)
    Publication Title Form Number
    CATIA.Assembly Modeling User's Guide SH52-7369

    Table 9. Material delivered with CATIA/CADAM.AEC Virtual Product Management (AVM)
    Publication Title Form Number
    CATIA/CADAM.AEC Virtual Product Management User's Guide SH52-1231
    CATIA/CADAM.AEC Virtual Product Management Setup Administrator's Guide SH52-1230
    CATIA.Data Management Products Installation Guide SH52-0677

    Table 10. Material delivered with CATIA.Body in White Templates (BWT)
    Publication Title Form Number
    CATIA.Body in White Templates User's Guide SH52-7380

    Table 11. Material delivered with CATIA.CATIA-Alias Interoperability (CAI)
    Publication Title Form Number
    CATIA.CATIA-Alias Interoperability User's Guide SH52-7370

    Table 12. Material delivered with CATIA.CATIA/CADAM Coupler (CCC)
    Publication Title Form Number
    CATIA.CATIA/CADAM Coupler Setup Methodology and Project Management Guide SH52-1234

    Table 13. Material delivered with CATIA.Data Management Access (CDA)
    Publication Title Form Number
    CATIA.Data Management Access Product Struct. and Database Access User's Guide SH52-1190

    Table 14. Material delivered with CATIA.Data Management-Build Time (CDB)
    Publication Title Form Number
    CATIA.Data Management Products Planning and Administration Guide SH52-0675

    Table 15. Material delivered with CATIA.CDM-PM Integration (CDP)
    Publication Title Form Number
    CATIA.CDM-PM Integration User's Guide SH52-7374

    Table 16. Material delivered with CATIA.Data Management-Run Time (CDR)
    Publication Title Form Number
    CATIA.Data Management Products Installation Guide SH52-0677

    Table 17. Material delivered with CATIA.Distributed Services (CDS)
    Publication Title Form Number
    CATIA.Distributed Services Planning and Administration Guide SH52-0720

    Table 18. Material delivered with CATIA.Cloud to Geometry (CGO)
    Publication Title Form Number
    CATIA.Cloud to Geometry User's Guide SH52-1191

    Table 19. Material delivered with CATIA.Composite Covering (COV)
    Publication Title Form Number
    CATIA.Composite Covering User's Guide SH52-1203

    Table 20. Material delivered with CATIA.Viewing Services (CVS)
    Publication Title Form Number
    CATIA.Viewing Services Reference Manual SH52-0635

    Table 21. Material Delivered with CATIA.Drafting (DRA)
    Publication Title Form Number
    CATIA.Drafting User's Guide SH52-1094

    Table 22. Material delivered with CATIA.Draw-Space (2D/3D) Integration (DRS)
    Publication Title Form Number
    CATIA.Draw-Space (2D/3D) Integration User's Guide SH52-1000

    Table 23. Material delivered with CATIA.Dynamic Sketcher (DYS)
    Publication Title Form Number
    CATIA.Dynamic Sketcher User's Guide SH52-1095

    Table 24. Material delivered with CATIA/CADAM.AEC Equipment Design (EQT)
    Publication Title Form Number
    CATIA/CADAM.AEC Process Design User's Guide SH52-1121
    CATIA/CADAM.AEC Process Setup Administrator's Guide SH52-1229

    Table 25. Material delivered with CATIA.Engraving/Embossing (ENG)
    Publication Title Form Number
    CATIA.Engraving/Embossing User's Guide SH52-1241

    Table 26. Material delivered with CATIA.Functional Dimension. & Toler. (FDT)
    Publication Title Form Number
    CATIA.Functional Dimensioning & Tolerancing User's Guide SH52-1192

    Table 27. Material delivered with CATIA.Generative Composite Covering (GCC)
    Publication Title Form Number
    CATIA.Generative Composite Covering User's Guide SH52-7383

    Table 28. Material delivered with CATIA.Generative Composite Manufacturing (GCM)
    Publication Title Form Number
    CATIA.Generative Composite Manufacturing User's Guide SH52-1306

    Table 29. Material delivered with CATIA.Generative Aerospace Sheetmetal Design (GSA)
    Publication Title Form Number
    CATIA.Generative Aerospace Sheetmetal Design User's Guide SH52-7379

    Table 30. Material delivered with CATIA.Global Shape Deformation (GSD)
    Publication Title Form Number
    CATIA.Global Shape Deformation User's Guide SH52-1236

    Table 31. Material delivered with CATIA.Generative Shape Modeling (GSM)
    Publication Title Form Number
    CATIA.Generative Shape Modeling User's Guide SH52-1242

    Table 32. Material delivered with CATIA.Inspection Planning Assistant (IPA)
    Publication Title Form Number
    CATIA.Inspection Planning Assistant User's Guide SH52-7371

    Table 33. Material delivered with CATIA/CADAM.AEC Piping Isometrics Product. (ISO)
    Publication Title Form Number
    CATIA/CADAM.AEC Process Design User's Guide SH52-1121
    CATIA/CADAM.AEC Process Setup Administrator's Guide SH52-1229

    Table 34. Material delivered with CATIA.Data Management - Library (LIC)
    Publication Title Form Number
    CATIA.Database Library Access User's Guide SH52-7378

    Table 35. Material delivered with CATIA.Lathe Machining Programmer (LMP)
    Publication Title Form Number
    CATIA.Lathe Machining Programmer User's Guide SH52-1302

    Table 36. Material delivered with CATIA.Mold and Die Machining Assistant (MAD)
    Publication Title Form Number
    CATIA.Mold and Die Machining Assistant User's Guide SH52-1104

    Table 37. Material delivered with CATIA.Multi-Axis Machining Programmer (MMP)
    Publication Title Form Number
    CATIA.Multi-Axix Machinig Programmer User's Guide SH52-7372

    Table 38. Material delivered with CATIA.Manufacturing Infrastructure (NCB)
    Publication Title Form Number
    CATIA.Manufacturing Infrastructure User's Guide SH52-0650

    Table 39. Material delivered with CATIA.4D Navigator (N4D)
    Publication Title Form Number
    CATIA.4D Navigator User's Guide SH52-1196

    Table 40. Material delivered with CATIA.3D Parametric Variational Modeler (PA3)
    Publication Title Form Number
    CATIA.3D Parametric Variational Modeler Beginner's Guide SH52-7373

    Table 41. Material delivered with CATIA/CADAM.AEC Piping and Instrum. Diagr. (PID)
    Publication Title Form Number
    CATIA/CADAM.AEC Process Design User's Guide SH52-1121
    CATIA/CADAM.AEC Process Setup Administrator's Guide SH52-1229

    Table 42. Material delivered with CATIA.Prismatic Machining Assistant (PMA)
    Publication Title Form Number
    CATIA.Prismatic Machining Assistant User's Guide SH52-1103

    Table 43. Material delivered with CATIA.Prismatic Machining Programmer (PMP)
    Publication Title Form Number
    CATIA.Prismatic Machining Programmer User's Guide SH52-1260

    Table 44. Material delivered with CATIA.Post Processor Builder (PPB)
    Publication Title Form Number
    CATIA.Post Processor Builder User's Guide SH52-1197

    Table 45. Material delivered with CATIA.Realistic Rendering (REN)
    Publication Title Form Number
    CATIA.Realistic Rendering User's Guide SH52-1199

    Table 46. Material delivered with Cell Design and Robot Programming (ROS)
    Publication Title Form Number
    CATIA.Cell Design and Robot Programming Methodology Guide SH52-1107
    CATIA.Cell Design and Robot Programming User's Guide SH52-1022

    Table 47. Material delivered with CATIA/CADAM.AEC Structural FEA Integrator (SAI)
    Publication Title Form Number
    CATIA/CADAM.AEC Structural Frame Modeling and Analysis user's Guide SH52-1127
    CATIA/CADAM.AEC Structures Setup Administrator's Guide SH52-1243

    Table 48. Material delivered with CATIA/CADAM.AEC.Ship Hull Design (SHD)
    Publication Title Form Number
    CATIA/CADAM.AEC Ship Hull Design User's Guide SH52-7365
    CATIA/CADAM.AEC Ship Hull Design Administrator's Guide SH52-7366

    Table 49. Material delivered with CATIA.Sheetmetal Design (SHE)
    Publication Title Form Number
    CATIA.Sheetmetal Design User's Guide SH52-7375

    Table 50. Material delivered with CATIA.Surface Machining Programmer (SMP)
    Publication Title Form Number
    CATIA.Surface Machining Programmer User's Guide SH52-7376

    Table 51. Material delivered with CATIA.Exact Solids (SOE)
    Publication Title Form Number
    CATIA.Part Design User's Guide SH52-1200

    Table 52. Material delivered with CATIA/CADAM.AEC Structural Frame Analysis (STA)
    Publication Title Form Number
    CATIA/CADAM.AEC Structural Frame Modeling and Analysis User's Guide SH52-1127
    CATIA/CADAM.AEC Structures Setup Administrator's Guide SH52-1243

    Table 53. Material delivered with CATIA/CADAM.AEC Structural Frame Modeling (STF)
    Publication Title Form Number
    CATIA/CADAM.AEC Structural Frame Modeling and Analysis User's Guide SH52-1127
    CATIA/CADAM.AEC Structures Setup Administrator's Guide SH52-1243

    Table 54. Material delivered with CATIA.STL Rapid Prototyping (STL)
    Publication Title Form Number
    CATIA.STL Rapid Prototyping User's Guide SH52-1244

    Table 55. Material delivered with CATIA.Toolshop Access (TSA)
    Publication Title Form Number
    CATIA.Toolshop Access User's Guide SH52-1198

    Table 56. Material delivered with CATIA.Visualization Studio (VST)
    Publication Title Form Number
    CATIA.Visualization Studio User's Guide SH52-1025

    Softcopy Publications:

    Three CD-ROMs (SK2T-5219-11), in FrameViewer format, two for Mechanical Solutions and one for AEC Plant Solutions, containing unlicensed CATIA Solutions Version 4 publications are delivered when ordering basic Machine-Readable material for CATIA Solutions Version 4,

    Contact your IBM Marketing representative or Systems Engineer (SE) to order copies of the CD-ROM or printed copies of any unlicensed publications.

    Optional Program Publications

    There are no optional publications for CATIA Solutions.


    Microfiche Support

    There is no microfiche for CATIA Solutions.


    Publications Useful During Installation

    The publications listed in Table 57 may be useful during the installation of CATIA Solutions.

    Table 57. Publications Useful During Installation
    Publication Title Form Number
    CATIA Solutions Installation Guide UNIX Workstation
    SH52-1189
    CATIA Solutions Planning and Administration Guide UNIX Workstation
    SH52-0601
    CATIA Solutions Installing Additional Features UNIX Workstation
    SH52-1223

    The reader should also have some knowledge of the basic AIX file environment and at least one editor.


    List of Documentation

    Important : the online documentation is the best so far level, and serves as the only reference for problem reporting.

    The following list contents all CATIA documentations available :

    
    
    
    
    ---------------------------------------------------------------------------
        IBM                            Documentation title
      Pub No.
    ---------------------------------------------------------------------------
    
    ***************************
    MECHANICAL DESIGN SOLUTIONS
    ***************************
    
    CATIA.Assembly Modeling (ASS)
    -----------------------------
    SH52-0680  CATIA.Assembly Modeling Reference Manual
    SH52-7369  CATIA.Assembly Modeling User's Guide
    
    CATIA.Composite Covering (COV)
    ------------------------------
    SH52-1005  CATIA.Composite Covering Interactive Functions Reference Manual
    SH52-1203  CATIA.Composite Covering User's Guide
    SH52-1006  CATIA.Composite Covering Application Programming Interface Reference
    
    CATIA.Drafting (DRA DRO)
    ------------------------
    SH52-0643  CATIA.Drafting V3R1 Dimension Reference Manual
    SH52-0640  CATIA.Drafting Interactive Functions Reference Manual
    SH52-0641  CATIA.Drafting Interactive Administration Guide
    SH52-0642  CATIA.Drafting Application Programming Interface Reference Manual
    SH52-1094  CATIA.Drafting User's Guide
    SH52-1094  Summary Card
    
    CATIA.Draw-Space (2D/3D) Integration (DRS)
    ------------------------------------------
    SH52-0644  CATIA.Draw-Space (2D/3D) Integration Reference Manual
    SH52-1000  CATIA.Draw-Space (2D/3D) Integration User's Guide
    
    CATIA.3D Functional Dimensioning & Tolerancing (FDT)
    ----------------------------------------------------
    SH52-1192  CATIA.3D Functional Dimensioning and Tolerancing User's Guide
    
    CATIA.Feature-Based Design (FEA)
    --------------------------------
    SH52-0638  CATIA.Feature-Based Design Interactive Functions Reference Manual
    SH52-0639  CATIA.Feature-Based Design Application Programming Interface Referenc
    
    CATIA.Generative Composite Covering (GCC)
    -----------------------------------------
    SH52-7383  CATIA.Generative Composite Covering User's Guide
    SH52-7384  CATIA.Generative Composite Covering Application Programming Interface
    
    CATIA.Generative Aerospace Sheetmetal Design (GSA)
    --------------------------------------------------
    SH52-7379  CATIA.Generative Aerospace Sheetmetal Design Users Guide
    
    CATIA.Sheetmetal Design (SHE)
    -----------------------------
    SH52-1007  CATIA.Sheetmetal Design Interactive Functions Reference Manual
    SH52-7375  CATIA.Sheetmetal Design User's Guide
    
    ********************************
    SHAPE DESIGN & STYLING SOLUTIONS
    ********************************
    
    CATIA.Advanced Surface Design (ASU)
    -----------------------------------
    SH52-0616  CATIA.Advanced Surface Design Interactive Functions Reference Manual
    SH52-0617  CATIA.Advanced Surface Design APPLICATION Programming Interface Refer
    
    CATIA.Body in White Templates (BWT)
    -----------------------------------
    SH52-7380  CATIA.Body in White Templates User's Guide
    
    CATIA.CATIA-Alias Interoperability (CAI)
    ----------------------------------------
    SH52-7370  CATIA.CATIA-Alias Interoperability User's Guide
    
    CATIA.Cloud to Geometry (CGO)
    -----------------------------
    SH52-1191  CATIA.Cloud to Geometry User's Guide
    
    CATIA.Develop (DEV)
    -------------------
    SH52-1023  CATIA.Develop Interactive Functions Reference Manual
    
    CATIA.Engraving/Embossing (ENG)
    -------------------------------
    SH52-1241  CATIA.Engraving/Embossing User's Guide
    
    CATIA.Free Form Design (FRF)
    ----------------------------
    SH52-0659  CATIA.Free Form Design Interactive Functions Reference Manual
    SH52-0660  CATIA.Free Form Design Application Programming Interface Reference Ma
    
    CATIA.Geodesic (GEO)
    --------------------
    SH52-0661  CATIA.Geodesic Interactive Functions Reference Manual
    SH52-0662  CATIA.Geodesic Application Programming Interface Reference Manual
    
    CATIA.Global Shape Deformation (GSD)
    ------------------------------------
    SH52-1236  CATIA.Global Shape Deformation User's Guide
    
    CATIA.Generative Shape Modeling (GSM)
    -------------------------------------
    SH52-1242  CATIA.Generative Shape Modeling User's Guide
    SH52-1305  CATIA.Generative Shape Modeling Application Programming Interface
    
    CATIA.Surface Design (SUD)
    --------------------------
    SH52-0627  CATIA.Surface Design Reference Manual
    
    ***********************
    MANUFACTURING SOLUTIONS
    ***********************
    
    CATIA.Generative Composite Manufacturing (GCM)
    ----------------------------------------------
    SH52-1306  CATIA.Generative Composite Manufacturing User's Guide
    
    CATIA.Inspection Planning Assistant (IPA)
    -----------------------------------------
    SH52-7371  CATIA.Inspection Planning Assistant User's Guide
    
    CATIA.Lath Machining Programmer (LMP)
    -------------------------------------
    SH52-1302  CATIA.Lathe Machining Programmer User's Guide
    
    CATIA.Milling Analysis (MAA)
    ----------------------------
    SH52-0683  CATIA.Milling Analysis User's Reference Manual
    
    CATIA.Mold and Die Machining Assistant (MAD)
    --------------------------------------------
    SH52-1104  CATIA.Mold and Die Machining Assistant User's Guide
    
    CATIA.Multi-Axis Machining Programmer (MMP)
    -------------------------------------------
    SH52-7372  CATIA.Multi-Axis Machining  Programmer User's Guide
    
    CATIA.Manufacturing Infrastructure (NCB)
    ----------------------------------------
    SH52-1105  CATIA.Manufacturing Infrastructure General Information Manual
    SH52-0650  CATIA.Manufacturing Infrastructure User's Guide
    SH52-1106  CATIA.Manufacturing Infrastructure Application Development Guide
    
    CATIA.Fixed Axis Milling (NC3)
    ------------------------------
    SH52-0648  CATIA.Fixed Axis Milling User's Reference Manual
    SH52-0649  CATIA.Fixed Axis Milling Application Programming Interface Reference
    
    CATIA.Multiple Axis Milling (NC5)
    ---------------------------------
    SH52-0652  CATIA.Multiple Axis Milling User's Reference Manual
    SH52-0653  CATIA.Multiple Axis Milling Application Programming Interface Referen
    
    CATIA.Nesting (NES)
    -------------------
    SH52-1008  CATIA.Nesting User's Reference Manual
    SH52-1009  CATIA.Nesting Application Programming Interface Reference Manual
    
    CATIA.Prismatic Machining Assistant (PMA)
    -----------------------------------------
    SH52-1103  CATIA.Prismatic Machining Assistant User's Guide
    
    CATIA.Prismatic Machining Programmer (PMP)
    ------------------------------------------
    SH52-1260  CATIA.Prismatic Machining Programmer User's Guide
    
    CATIA.Post Processor Builder (PPB)
    ----------------------------------
    SH52-1197  CATIA.Post Processor Builder User's Guide
    
    CATIA.Robot and Controller Definition (ROC)
    -------------------------------------------
    SH52-0691  CATIA.Robot and Controller Definition Interactive Functions Reference
    SH52-0692  CATIA.Robot and Controller Definition Application Programming Interfa
    SH52-0693  CATIA.Robot and Controller Definition Open System Programming Guide
    
    CATIA.Cell Design and Robot Programming (ROS)
    ---------------------------------------------
    SH52-1107  CATIA.Cell Design and Robot Programming Methodology Guide
    SH52-1022  CATIA.Cell Design and Robot Programming User's Guide
    SH52-0694  CATIA.Cell Design and Robot Programming User's Reference Manual
    SH52-0695  CATIA.Cell Design and Robot Programming Application Programming Inter
    
    CATIA.Surface Machining Programmer (SMP)
    ----------------------------------------
    SH52-7376  CATIA.Surface Machining Programmer User's Guide
    
    CATIA.STL Rapid Prototyping (STL)
    ---------------------------------
    SH52-1244  CATIA.STL Rapid Prototyping User's Guide
    
    CATIA.Toolshop Access (TSA)
    ---------------------------
    SH52-1198  CATIA.Toolshop Access User's Guide
    
    CATIA.Lathe (TUR)
    -----------------
    SH52-0681  CATIA.Lathe User's Reference Manual
    SH52-0682  CATIA.Lathe Application Programming Interface Reference Manual
    
    *******************************
    ANALYSIS & SIMULATION SOLUTIONS
    *******************************
    
    CATIA.Analysis Infrastructure (ANI)
    -----------------------------------
    SH52-0684  CATIA.Analysis Infrastructure User's Reference Manual
    SH52-1101  CATIA.Analysis Finite Element Analysis Modeling Guide
    SH52-0685  CATIA.Analysis Infrastructure Open System Programming Guide
    
    CATIA.ANSYS Interface( ANS)
    ---------------------------
    SH52-0718  CATIA.ANSYS Interface User's Reference Manual
    
    CATIA.Assembly & Substructure Analysis (ASA)
    --------------------------------------------
    SH52-1303  CATIA.Assembly & Substructure Analysis User's Guide
    
    CATIA.ELFINI Solver (ELF)
    -------------------------
    SH52-0719  CATIA.ELFINI Solver User's Reference Manual
    SH52-1102  CATIA.ELFINI Solver User's Verification Manual
    
    CATIA.Finite Element Modeler (FEM)
    ----------------------------------
    SH52-0686  CATIA.Finite Element Modeler Interactive Functions Reference Manual
    
    CATIA.Generative Part Stress Analysis (GPD, GPO, GPS)
    -----------------------------------------------------
    SH52-1026  CATIA.Generative Part : Stress Analysis, Optimization and Dynamic Ana
    
    CATIA.Kinematics (KIN)
    ----------------------
    SH52-0689  CATIA.Kinematics User's Reference Manual
    SH52-0690  CATIA.Kinematics Application Programming Interface Reference Manual
    
    CATIA.NASTRAN Interface (NAS)
    -----------------------------
    SH52-0688  CATIA.NASTRAN Interface User's Reference Manual
    
    CATIA.Scientific Presentation Manager (SPM)
    -------------------------------------------
    SH52-1304  CATIA.Scientific Presentation Manager User's Guide
    SH52-0687  CATIA.Scientific Presentation Manager Interactive Functions Reference
    
    *****************************************
    EQUIPMENT & SYSTEMS ENGINEERING SOLUTIONS
    *****************************************
    
    CATIA.Building Design (BDG)
    ---------------------------
    SH52-1003  CATIA.Building Design Interactive Functions Reference Manual
    SH52-1004  CATIA.Building Design Application Programming Interface Reference Man
    
    CATIA.Knowledge Engineering (CKE)
    ---------------------------------
    SH52-1024  CATIA.Knowledge Engineering User's Manual
    
    CATIA.Electrical Device and Support Modeling (ELD)
    --------------------------------------------------
    SH52-0714  CATIA.Electrical Device and Support Modeling Interactive Functions Re
    SH52-0715  CATIA.Electrical Device and Support Modeling Application Programming
    
    CATIA.Electrical Generative Formboard (ELG)
    -------------------------------------------
    SH52-1020  CATIA.Electrical Generative Formboard User's Manual
    
    CATIA.Electrical Wire Bundle (ELW)
    ----------------------------------
    SH52-0716  CATIA.Electrical Wire Bundle Installation User's Reference Manual
    SH52-0717  CATIA.Electrical Wire Bundle Installation Application Programming Int
    
    CATIA.Fitting Simulation (FIT)
    ------------------------------
    SH52-1021  CATIA.Fitting Simulation User's Manual
    
    CATIA.System Schematics (SCH)
    -----------------------------
    SH52-0698  CATIA.System Schematics Interactive Functions Reference Manual
    SH52-0699  CATIA.System Schematics Application Programming Interface Reference M
    
    CATIA.Ship Steelwork Design (SHB)
    ---------------------------------
    SH52-1097  CATIA.Ship Steelwork Design Reference Manual
    
    CATIA.Ship Steelwork Production (SHP)
    -------------------------------------
    SH52-1098  CATIA.Ship Steelwork Production Reference Manual
    
    CATIA.Space Analysis (SPA)
    --------------------------
    SH52-0657  CATIA.Space Analysis User's Reference Manual
    SH52-0658  CATIA.Space Analysis Application Programming Interface Reference Manu
    
    CATIA.Systems Pathways Definition (SPD)
    ---------------------------------------
    SH52-1248  CATIA.Systems Pathways Definition Application Programming Interface R
    SH52-1227  CATIA.Systems Pathways Definition Reference Manual
    
    CATIA.Space Navigation (SPN)
    ----------------------------
    SH52-0722  CATIA.Space Navigation Reference Manual
    
    CATIA.Structural Design (STM)
    -----------------------------
    SH52-1001  CATIA.Structural Design Interactive Functions Reference Manual
    SH52-1002  CATIA.Structural Design Application Programming Interface Reference M
    
    CATIA.3D Tubing Design (TU3)
    ----------------------------
    SH52-0696  CATIA.3D Tubing Design Interactive Functions Reference Manual
    SH52-0697  CATIA.3D Tubing Design Application Programming Interface Reference Ma
    
    ****************************
    CAA INFRASTRUCTURE SOLUTIONS
    ****************************
    
    CATIA.CPW/Automated Test Tools (ATT)
    ------------------------------------
    SH52-0700  CATIA.CPW/Automated Test Tools Interactive Functions Reference Manual
    SH52-0701  CATIA.CPW/Automated Test Tools Utilities User's Guide
    SH52-0605  CATIA.CPW/Automated Test Tools Messages and Codes
    
    CATIA.CATIA/CADAM Coupler (CCC)
    -------------------------------
    SH52-0671  CATIA.CATIA/CADAM Coupler Reference Manual
    SH52-1234  CATIA.CATIA/CADAM Coupler Setup Methodology and Project Management Gu
    
    CATIA.Data Management - Access (CDA)
    ------------------------------------
    SH52-0663  CATIA.Data Management - Access Interactive Functions Reference Manual
    SH52-0664  CATIA.Data Management - Access Application Programming Interface Refe
    SH52-0665  CATIA.Data Management - Access Utilities User's Guide
    SH52-0666  CATIA.Data Management - Access Planning and Administration Guide
    SH52-0667  CATIA.Data Management - Access General Information Manual
    SH52-0668  CATIA.Data Management - Access AAPD User's Guide
    SH52-0669  CATIA.Data Management - Access AAPD Application Development Guide and
    SH52-1190  CATIA.Data Management - Access Product Structure and Database Access
    
    CATIA.Data Management products (CDM, CDR, CDB)
    ----------------------------------------------
    SH52-0673  CATIA.Data Management Products User's Guide
    SH52-0674  CATIA.Data Management Products Application Development Reference Manu
    SH52-0675  CATIA.Data Management Products Planning and Administration Guide
    SH52-0676  CATIA.Data Management Products Application Development Guide
    SH52-0677  CATIA.Data Management Products Installation Guide
    SH52-0678  CATIA.Data Management Products Messages and Codes
    SH52-0679  CATIA.Data Management Products General Information Manual
    
    CATIA.CDM-PM Integration (CDP)
    ------------------------------
    SH52-7374  CATIA.CDM-PM Integration User's Guide
    
    CATIA.Distributed Services (CDS)
    --------------------------------
    SH52-0615  CATIA.Distributed Services Reference Manual
    SH52-0720  CATIA.Distributed Services Planning and Administration Guide
    
    CATIA.Object Manager (COM)
    --------------------------
    SH52-1189  CATIA Solutions Installation Guide UNIX Workstation
    SH52-1223  CATIA Solutions Installing Additional Features UNIX Workstation
    SH52-0598  CATIA Solutions Application Architecture Overview
    SH52-0601  CATIA Solutions Software Administration Guide UNIX Workstation
    SH52-1108  CATIA Solutions Double-Byte Character Set Fonts
    SH52-0604  CATIA Solutions Problem Determination Guide
    SH52-0606  Motif CATIA Solutions User's Guide
    SH52-1224  CATIA Solutions Glossary
    SH52-0612  CATIA Solutions Messages and Codes
    SH52-0613  CATIA Solutions Application Programming Interface Quick Reference
    SH52-1225  CATIA Solutions Application Programming Interface Online Index
    SH52-0614  CATIA Solutions Interactive User Access Command Quick Reference
    SH52-1226  CATIA Solutions Interactive User Access Command Online Index
    SH52-0858  CATIA Solutions Declaration Quick Reference UNIX Workstation
    SH52-0634  CATIA Solutions Interactive Functions Reference Manual
    SH52-0631  CATIA Solutions Application Programming Interface Reference Manual
    SH52-1093  CATIA Solutions Product Enhancement Overview
    SH52-1249  CATIA.Solutions Plotting and Printing Users Guide UNIX Workstation
    SH52-0633  CATIA.Object Manager Interactive User Access Commands
    SH52-0611  CATIA.Object Manager Interactive User Access Reference Manual
    SH52-0603  CATIA.Solutions Data Administration and Interoperability Guide
    SH52-0630  CATIA.Object Manager Interactive Functions Reference Manual
    SH52-0632  CATIA.Object Manager Utilities User's Guide
    
    CATIA.Viewing Services (CVS)
    ----------------------------
    SH52-0635  CATIA.Viewing Services Reference Manual
    
    CATIA.2D Wireframe and Annotation (DR2 DRO)
    -------------------------------------------
    SH52-0645  CATIA.2D Wireframe and Annotation Interactive Functions Reference Man
    SH52-0646  CATIA.2D Wireframe and Annotation Application Programming Interface R
    SH52-0647  CATIA.2D Wireframe and Annotation V3R1 Text Reference Manual
    
    CATIA.DXF/DWG Interface (DXF)
    -----------------------------
    SH52-1235  CATIA.DXF/DWG Interface Reference Manual
    
    CATIA.Dynamic Sketcher (DYS)
    ----------------------------
    SH52-1095  CATIA.Dynamic Sketcher User's Guide
    
    CATIA.Graphics Interactive Interface (GII)
    ------------------------------------------
    SH52-0655  CATIA.Graphics Interactive Interface Reference Manual
    SH52-1204  CATIA.Graphics Interactive Interface Motif Style Guide UNIX Workstati
    
    CATIA.IGES Military Standard 28000 (IGC)
    ----------------------------------------
    SH52-0656  CATIA.IGES Military Standard 28000 Reference Manual
    
    CATIA.IGES Interface (IGI)
    --------------------------
    SH52-0629  CATIA.IGES Interface Reference Manual
    
    CATIA.IGES Integrated Interface (IGS)
    -------------------------------------
    SH52-7377  CATIA.IGES Integrated Interface Reference Manual
    
    CATIA.Image Design (IMD)
    ------------------------
    SH52-0654  CATIA.Image Design User's Reference Manual
    SH52-0721  CATIA.Image Design Application Programming Interface Reference Manual
    
    CATIA.Library (LIB)
    -------------------
    SH52-0628  CATIA.Library Reference Manual
    
    CATIA.Data Management - Library (LIC)
    -------------------------------------
    SH52-7378  CATIA.Database Library Access User's Guide
    SH52-0670  CATIA.Data Management - Library Reference Manual
    
    CATIA.4D Navigator (N4D)
    ------------------------
    SH52-1196  CATIA.4D Navigator User's Guide
    
    CATIA.3D Parametric Variational Modeler (PA3)
    ---------------------------------------------
    SH52-0625  CATIA.3D Parametric Variational Modeler Interactive Functions Referen
    SH52-0626  CATIA.3D Parametric Variational Modeler Application Programming Inter
    SH52-7373  CATIA.3D Parametric Variational Modeler Beginner's Guide
    
    CATIA.Publishing (PBG)
    ----------------------
    SH52-0637  CATIA.Publishing Reference Manual
    
    CATIA/CADAM.Hybrid Raster (RAS)
    -------------------------------
    SH52-1096  CATIA/CADAM.Hybrid RASTER Editor Interactive Functions Reference Manu
    
    CATIA.Realistic Rendering (REN)
    -------------------------------
    SH52-1199  CATIA.Realistic Rendering User's Guide
    
    CATIA.Exact Solids (SOE)
    ------------------------
    SH52-1200  CATIA.Part Design User's Guide, UNIX Workstation
    SH52-0623  CATIA.Exact Solids User's Reference Manual
    SH52-0624  CATIA.Exact Solids Application Programming Interface Reference Manual
    
    CATIA.Solid Mock-up (SOM)
    -------------------------
    SH52-0621  CATIA.Solid Mock-up User's Reference Manual
    SH52-0622  CATIA.Solid Mock-up Application Programming Interface Reference Manua
    
    CATIA.STEP AP203 Interface (STP)
    --------------------------------
    SH52-1099  CATIA.STEP AP203 Interface Reference Manual
    
    CATIA.STEP AP214 Infrastructure Interface (ST1)
    -----------------------------------------------
    SH52-1233  CATIA.STEP AP214 Infrastructure Interface Reference Manual
    
    CATIA.CPW/software Environment (SWE)
    ------------------------------------
    SH52-0702  CATIA.CPW/Software Environment Interactive Functions Reference Manual
    SH52-0703  CATIA.CPW/Software Environment Utilities User's Guide
    
    CATIA.Visualization Studio (VST)
    --------------------------------
    SH52-1025  CATIA.Visualization Studio User's Guide
    SH52-1247  CATIA.Visualization Studio Application Programming Interface Referenc
    
    CATIA.3D Wireframe (WF3)
    ------------------------
    SH52-0618  CATIA.3D Wireframe Interactive Functions Reference Manual
    SH52-0619  CATIA.3D Wireframe Application Programming Interface Reference Manual
    SH52-0620  CATIA.3D Wireframe Interactive User Access Commands
    
    *******************
    AEC PLANT SOLUTIONS
    *******************
    
    CATIA/CADAM.AEC Infrastructure (ABA)
    ------------------------------------
    SH52-1111  CATIA/CADAM.AEC Infrastructure Interactive Functions Reference Manual
    SH52-1112  CATIA/CADAM.AEC Infrastructure Application Programming Interface Refe
    SH52-1115  CATIA/CADAM.AEC Base and Drawing Generation Setup Administrator's Gui
    SH52-1114  CATIA/CADAM.AEC Base and Drawing Generation User's Guide
    SH52-1113  CATIA/CADAM.AEC Infrastructure Interactive User Access Commands
    
    CATIA/CADAM.AEC Drawing production (ADP)
    ----------------------------------------
    SH52-1128  CATIA/CADAM.AEC Drawing Production Reference Manual
    
    CATIA/CADAM.AEC Drafting (ADR)
    ------------------------------
    SH52-1116  CATIA/CADAM.AEC Drafting Interactive Functions Reference Manual
    SH52-1118  CATIA/CADAM.AEC Drafting Interactive User Access Commands Reference M
    SH52-1117  CATIA/CADAM.AEC Drafting Application Programming Interface Reference
    
    CATIA/CADAM.AEC Ductwork Design (ADW)
    -------------------------------------
    SH52-1193  CATIA/CADAM.AEC Ductwork Design Interactive Functions Reference Manua
    SH52-1194  CATIA/CADAM.AEC Ductwork Design Application Programming Interface Ref
    SH52-1228  CATIA/CADAM.AEC Ductwork Design Setup Administrator's Guide
    SH52-1195  CATIA/CADAM.AEC Ductwork Design User's Guide
    
    CATIA/CADAM.AEC Piping Design (APD)
    -----------------------------------
    SH52-1119  CATIA/CADAM.AEC Piping Design Interactive Functions Reference Manual
    SH52-1120  CATIA/CADAM.AEC Piping Design Application Programming Interface Refer
    SH52-1121  CATIA/CADAM.AEC Process Design User's Guide
    SH52-1229  CATIA/CADAM.AEC Process Setup Administrator's Guide
    SH52-1205  CATIA/CADAM.AEC Piping Design Catalog and Setup Data Migration Guide
    
    CATIA/CADAM.AEC Raceway Design (ARW)
    ------------------------------------
    SH52-1297  CATIA/CADAM.AEC Raceway Design Setup Administrator's Guide
    SH52-1298  CATIA/CADAM.AEC Raceway Design User's Guide
    SH52-1299  CATIA/CADAM.AEC Raceway Design Application Programming Interface Refe
    
    CATIA/CADAM.AEC Virtual Product Management (AVM)
    ------------------------------------------------
    SH52-1230  CATIA/CADAM.AEC Virtual Product Management Setup Administrator's Guid
    SH52-1231  CATIA/CADAM.AEC Virtual Product Management User's Guide
    SH52-1232  CATIA/CADAM.AEC Virtual Product Management Application Programming In
    
    CATIA.AEC Equipment Design (EQT)
    --------------------------------
    SH52-1122  CATIA/CADAM.AEC Equipment Design Interactive Functions Reference Manu
    SH52-1123  CATIA/CADAM.AEC Equipment Design Application Programming Interface Re
    
    CATIA/CADAM.AEC Piping Isometrics Production (ISO)
    --------------------------------------------------
    SH52-1124  CATIA/CADAM.AEC Piping Isometrics Production Reference Manual
    
    CATIA/CADAM.AEC Piping & Instrumentation Diagrams (PID)
    -------------------------------------------------------
    SH52-1239  CATIA/CADAM.AEC Piping & Instrumentation Diagrams Application Program
    
    CATIA/CADAM.AEC Structural FEA Integrator (SAI)
    -----------------------------------------------
    SH52-1129  CATIA/CADAM.AEC Structural FEA Integrator Reference Manual
    
    CATIA/CADAM.AEC Ship Hull Design (SHD)
    --------------------------------------
    SH52-7382  CATIA/CADAM.AEC Ship Hull Design Application Programming Interface Re
    SH52-7365  CATIA/CADAM.AEC Ship Hull Design User's Guide
    SH52-7366  CATIA/CADAM.AEC Ship Hull Design Setup Administrator's Guide
    
    CATIA/CADAM.AEC Structural Frame Analysis (STA)
    -----------------------------------------------
    SH52-1130  CATIA/CADAM.AEC Structural Frame Analysis Reference Manual
    
    CATIA/CADAM.AEC Structural Frame Modeling (STF)
    -----------------------------------------------
    SH52-1125  CATIA/CADAM.AEC Structural Frame Modeling User's Reference Manual
    SH52-1126  CATIA/CADAM.AEC Structural Frame Modeling Application Programming Int
    SH52-1243  CATIA/CADAM.AEC Structures Setup Administrator's Guide
    SH52-1127  CATIA/CADAM.AEC Structural Frame Modeling and Analysis User's Guide
    
    
    
    

    Program Support

    This section describes the IBM support available for CATIA Solutions.


    Preventive Service Planning

    Before installing CATIA Solutions, check with your IBM Support Center or use either Information/Access or SoftwareXcel Extended to see whether there is additional Preventive Service Planning (PSP) information that you should know. To obtain this information, specify the following UPGRADE and SUBSET values:

    Table 58. PSP Upgrade and Subset ID
    Retain COMPID Release Upgrade Subset
    Products



    562610000 422 CATIA422AI CATIA/CFG For all Configurations
    - - - CATIA/COM CATIA.Object Manager
    - - - CATIA/xxx where xxx is the marketed product


    Statement of Support Procedures

    Report any difficulties you have using this program to your IBM Support Center. If an APAR is required, the Support Center will provide the address to which any needed documentation can be sent.

    Table 59 identifies the component IDs (COMPID) for CATIA Solutions.

    Table 59. Component IDs
    Retain COMPID Release Component Name
    FESN


    562610000 422 CATIA Solutions Version 4 0900149


    Installation Requirements and Considerations

    The following sections identify the system requirements for installing and activating CATIA Solutions.


    System Requirements

    This section describes the environment of the system required to install and use CATIA Solutions.

    Operating System Requirements

    CATIA Solutions Version 4 Release 2.2 operates under the following Operating System:

    CATIA.4D Navigator and CATIA.Assembly Modeling also require the OpenGL and GL3.2 for AIX product. This product is also strongly recommended for CATIA.Realistic Rendering, CATIA.Visualization Studio and CATIA.Engraving/Embossing products. OpenGL and GL3.2 for AIX product is delivered with AIX 4.3 operating system.


    Even if the CATIA.Scientific Presentation Manager Product (SPM) does not require the OpenGL and GL3.2 for AIX product, the new catspm command (provided with SPM) requires it. This will not impact the existing ANVISU function. OpenGL and GL3.2 for AIX product is delivered with AIX 4.3 operating system.

    On AIX 4.3.2 in a Japanese environment, please refer to section NLS Considerations of this document for additional information.

    The above PTF list was correct at the time this Program Directory was printed. Please refer to the PSP bucket in Retain to check for an updates to the list.

    Notes:

    Machine Requirements

    The hardware requirements for CATIA Solutions are described in the "CATIA Solutions Installation Guide" (SH52-1189).

    Programming Requirements

    The Programming environment for CATIA Solutions is described in the "CATIA Solutions Installation Guide" (SH52-1189).

    DASD Storage Requirements

    The storage requirements of CATIA Solutions may vary with your selection of products and options. As a guideline for your dimensioning of storage requirements, maximum values are provided below, allowing a margin for maintenance modifications. Beside these values, up to 6 MB of temporary storage (/tmp) will be used during the installation, and up to approximativelly 100 MB for administrator customization without demo files.

    As the different products may be installed separately, their individual sizes are also provided. Take note however that these products share large common parts and that the size of a given combination of any such products is usually significantly smaller than the sum of their sizes. Product sizes are provided below, along with the size and mapping of standard configurations.

    The allocations for table Table 60 provides numbers that you may wish to revise based on your plans for adding additional function or service. These figures contain 10% extra space.

    Table 60. Maximum Storage Requirements for Types of deliveries:
    Type
    Maximum Size (Megabytes)

    Code 1450

    Demo 260

    The allocations for table Table 61 provides numbers that you may wish to revise based on your plans for adding additional function or service.

    Table 61. Storage for each product
    Product Name
    type code Size (kilobytes) demo Size (kilobytes)
    ABAS421 product 244048 6636
    ACDS421 product 5464 -
    ADPS421 product 15792 -
    ADRS421 product 800 -
    ADWS421 product 4096 -
    ANIS421 product 9500 52128
    ANSS421 product 4044 -
    APDS421 product 4812 -
    ARWS421 product 3976 -
    ASAS421 product 1456 10452
    ASSS421 product 45096 728
    ASUS421 product 8316 -
    ATTS421 product 2580 -
    AVMS421 product 18776 71452
    BDGS421 product 832 -
    BWTS421 product 1820 -
    CAIS421 product 1224 -
    CASS421 product 1696 -
    CCCS421 product 12392 -
    CDAS421 product 17564 71452
    CDBS421 product 144 -
    CDPS421 product 5592 -
    CDRS421 product 183152 -
    CDSS421 product 1848 -
    CGOS421 product 8888 -
    CGWS421 product 88 -
    CKES421 product 9812 56
    COMS421 product 175804 -
    COVS421 product 24628 628
    CVSS421 product 171780 -
    DEVS421 product 576 -
    DR2S421 product 7504 -
    DRAS421 product 8148 -
    DRLS421 product 19424 600
    DROS421 product 164 -
    DRSS421 product 16324 724
    DXFS421 product 5812 -
    DYSS421 product 4096 48
    ELDS421 product 9456 -
    ELFS421 product 3372 17160
    ELGS421 product 11672 -
    ELWS421 product 10284 -
    ENGS421 product 2624 4364
    EQTS421 product 6688 -
    FDTS421 product 15540 248
    FEAS421 product 35972 -
    FEMS421 product 8528 -
    FITS421 product 3600 -
    FONS421 product 17272 -
    FRFS421 product 3536 -
    GCCS421 product 44 -
    GCMS421 product 24836 7508
    GCTS421 product 552 364
    GEOS421 product 896 -
    GIIS421 product 1344 -
    GPDS421 product 52 -
    GPOS421 product 52 -
    GPSS421 product 14372 1640
    GSAS421 product 88436 1980
    GSDS421 product 948 304
    GSMS421 product 11772 44
    IGCS421 product 4240 -
    IGIS421 product 3952 -
    IGSS421 product 4648 -
    IMDS421 product 7496 -
    IPAS421 product 19972 1176
    ISOS421 product 3988 -
    KINS421 product 10848 -
    LIBS421 product 1468 -
    LICS421 product 2476 -
    LMPS421 product 1816 -
    MAAS421 product 9720 -
    MADS421 product 23300 484
    MMPS421 product 17420 2112
    N4DS421 product 16084 -
    NASS421 product 8164 -
    NC3S421 product 11496 -
    NC5S421 product 11740 -
    NCBS421 product 100540 50764
    NCRS421 product 28 -
    NESS421 product 1148 -
    PA3S421 product 17396 -
    PBGS421 product 1716 -
    PIDS421 product 6252 -
    PMAS421 product 52416 1564
    PMPS421 product 22512 600
    PPBS421 product 50016 -
    RASS421 product 248 -
    RENS421 product 39024 39508
    ROCS421 product 4432 -
    ROSS421 product 32520 9448
    SAIS421 product 4652 -
    SCHS421 product 8944 -
    SHBS421 product 10204 -
    SHDS421 product 13384 -
    SHES421 product 31776 1600
    SHPS421 product 28344 724
    SMPS421 product 19320 312
    SOES421 product 25104 40
    SOMS421 product 17552 -
    SPAS421 product 10692 -
    SPDS421 product 11084 -
    SPMS421 product 4652 -
    SPNS421 product 1128 -
    ST1S421 product 3132 -
    ST2S421 product 4200 -
    STAS421 product 24812 -
    STFS421 product 26744 -
    STLS421 product 17408 936
    STMS421 product 8624 -
    STPS421 product 2588 -
    SUDS421 product 1620 -
    SWES421 product 2128 -
    TSAS421 product 38608 -
    TU3S421 product 10596 -
    TURS421 product 3064 -
    VSTS421 product 51500 39860
    WANS421 product 44 -
    WEBS421 product 3800 -
    WF3S421 product 4436 -
    WMCS421 product 44 -
    WPBS421 product 44 -
    WSPS421 product 44 -
    AD1C421 config 233020 88
    AD2C421 config 306468 1540
    AD3C421 config 350472 41400
    AD5C421 config 297488 1584
    ADDC421 config 253276 812
    ADVC421 config 266592 2452
    ALAC421 config 701804 118776
    ALMC421 config 790008 225024
    ASCC421 config 264844 816
    ASDC421 config 288856 1540
    ASHC421 config 227768 772
    CADC421 config 181856 -
    CANC421 config 198484 52128
    DAAC421 config 234736 69376
    DAMC421 config 344436 51576
    DETC421 config 207604 724
    DRPC421 config 196844 48
    DWDC421 config 213168 772
    EEFC421 config 248700 812
    EEMC421 config 227076 88
    FAMC421 config 298696 50812
    FANC421 config 207016 52176
    FBDC421 config 245516 812
    FBPC421 config 225260 88
    FEIC421 config 210388 69336
    GBWC421 config 203768 44
    GCDC421 config 201028 992
    GPAC421 config 190280 1640
    GSHC421 config 209868 92
    MAMC421 config 306440 50812
    MDMC421 config 357184 51896
    MOKC421 config 203356 48
    MUMC421 config 346740 53788
    MXMC421 config 355824 53788
    NCLC421 config 311584 51536
    PAIC421 config 487068 7408
    PCDC421 config 492132 7408
    PDBC421 config 481224 7408
    PDDC421 config 490764 7408
    PDGC421 config 496788 7408
    PIPC421 config 485212 7408
    PLDC421 config 523388 7408
    PMDC421 config 545004 7408
    PPDC421 config 491480 7408
    PRDC421 config 488828 7408
    PRMC421 config 367424 52328
    PSAC421 config 507676 7408
    PSDC421 config 507676 7408
    PSHC421 config 494316 7408
    PTDC421 config 517332 7408
    PVMC421 config 502436 78812
    SB5C421 config 263956 1540
    SBDC421 config 231516 812
    SBPC421 config 211260 88
    SBVC421 config 224576 1728
    SDAC421 config 209792 88
    SDDC421 config 246700 2412
    SOLC421 config 215260 40
    STYC421 config 285364 40888
    SUMC421 config 343052 51676
    SUPC421 config 195740 48
    SURC421 config 188440 -
    TOMC421 config 347032 51848
    TUMC421 config 229200 48
    ZANC421 config 210692 52128
    ZMDC421 config 341096 1540
    ZMGC421 config 381032 52812

    Notes:

    1. The following configurations DAM,FAM,MAM are withdrawn from marketing

    2. Configurations are combinations of several products, using the following mapping:
      AD1
      ASU,COM,DYS,FEA,LIB,PA3,SOE,SUD,WF3
      AD2
      ASS,ASU,COM,DRA,DRS,DR2,DXF,DYS,FEA,FRF,IMD,KIN,LIB,PA3,SOE,SPA,SUD,WF3
      AD3
      ASS,ASU,COM,DRA,DRS,DR2,DXF,DYS,FEA,FRF,KIN,LIB,PA3,SOE,SPA,SUD,VST,WF3
      AD5
      ASS,ASU,COM,DRA,DRS,DR2,DXF,DYS,FEA,GSM,IGS,LIB,PA3,SOE,SUD,WF3
      ADD
      ASU,COM,DRA,DRS,DR2,DXF,DYS,FEA,LIB,PA3,SOE,SUD,WF3
      ADF
      ABA,ADR,ADW,APD,ARW,COM,DXF,DYS,EQT,FIT,LIB,N4D,SPA,STF
      ADV
      ASU,COM,DRA,DRS,DR2,DXF,DYS,FEA,GPO,GPS,LIB,PA3,SOE,SUD,WF3
      ASC
      ASS,COM,DYS,FEA,KIN,LIB,PA3,SOE,WF3
      ASD
      ASS,COM,DRA,DRS,DR2,DXF,DYS,FEA,KIN,LIB,PA3,SOE,SPA,WF3
      ASH
      ASU,COM,DRA,DRS,DR2,DXF,DYS,FRF,LIB,SUD,WF3
      CAD
      ATT,COM,GII,SWE
      CAN
      ANI,FEM,SPM
      DAA
      ANI,COM,DYS,ELF,FEM,PA3,SOE,SPM,SUD,WF3
      DAM
      COM,DRA,DRS,DR2,DXF,DYS,LIB,MAA,NCB,NCR,NC3,PA3,SOE,SUD,WF3
      DET
      DRA,DRS,DR2,DXF
      DRP
      COM,DRA,DR2,DXF,DYS,LIB
      DWD
      COM,DRA,DRS,DR2,DXF,DYS,LIB
      EEF
      COM,DRA,DRS,DR2,DXF,DYS,ELD,ELG,ELW,LIB,PA3,SOE,SPA,SPD,WF3
      EEM
      COM,DYS,ELD,ELW,LIB,PA3,SOE,SPA,SPD,WF3
      FAM
      COM,DYS,LIB,MAA,NCB,NC3,SUD,WF3
      FAN
      ANI,COM,DYS,FEM,SPM,SUD,WF3
      FBD
      COM,DRA,DRS,DR2,DXF,DYS,FEA,LIB,PA3,SOE,WF3
      FBP
      COM,DYS,FEA,LIB,PA3,SOE,WF3
      FEI
      ANI,COM,DYS,ELF,FEM,SPM,SUD,WF3
      GBW
      BWT,GSM
      GPA
      GPD,GPO,GPS
      GSH
      ASU,COM,DYS,FRF,GSM,LIB,SUD,WF3
      MAM
      ASU,COM,DYS,LIB,MAA,NCB,NC5,SUD,WF3
      MDM
      COM,DYS,MAD,NCB,PMP,SMP,SUD,TSA,WF3
      MOK
      COM,DYS,LIB,SOM,WF3
      MUM
      MMP,NCB,PMP,SMP,TSA
      MXM
      COM,IGS,MMP,NCB,PMP,SMP,TSA,WF3
      NCL
      COM,DRS,DR2,DYS,LIB,NCB,TUR,WF3
      PAI
      ABA,ADR,COM,DXF,DYS,LIB,PID
      PCD
      ABA,ADR,COM,DXF,DYS,EQT,LIB,ACD
      PDB
      ABA,ADR,COM,DXF,DYS,LIB
      PDD
      ABA,ADR,ADW,COM,DXF,DYS,EQT,LIB
      PDG
      ABA,ADP,ADR,COM,DXF,DYS,LIB
      PIP
      ABA,ADR,COM,DXF,DYS,ISO,LIB
      PLD
      ABA,ADR,ADW,APD,ARW,COM,DXF,DYS,EQT,LIB,SPA,STF
      PMD
      ABA,ADR,ADW,APD,ARW,COM,DXF,DYS,EQT,FIT,LIB,N4D,SPA,STF,ACD
      PPD
      ABA,ADR,APD,COM,DXF,DYS,EQT,LIB
      PRD
      ABA,ADR,ARW,COM,DXF,DYS,LIB,SPD
      PRM
      NCB,PMA,PMP,TSA
      PSA
      ABA,ADR,COM,DXF,DYS,LIB,STA,STF
      PSD
      ABA,ADR,COM,DXF,DYS,LIB,STF
      PSH
      ABA,ADR,COM,DXF,DYS,LIB,SHD
      PTD
      ABA,ADR,COM,DXF,DYS,LIB,STA,STF,ADP,EQT
      PVM
      AVM,CDR
      SB5
      ASS,COM,DRA,DRS,DR2,DXF,DYS,IGS,LIB,PA3,SOE,WF3
      SBD
      COM,DRA,DRS,DR2,DXF,DYS,LIB,PA3,SOE,WF3
      SBP
      COM,DYS,LIB,PA3,SOE,WF3
      SBV
      COM,DYS,GPO,GPS,LIB,PA3,SOE,WF3
      SDA
      DYS,PA3,SOE,WF3
      SDD
      COM,DRA,DRS,DR2,DXF,DYS,LIB,PA3,SHE,SOE,WF3
      SOL
      FEA,PA3,SOE
      STY
      ASU,CGO,COM,DYS,FRF,GSM,LIB,STL,SUD,VST,WF3
      SUM
      NCB,PMP,SMP,TSA
      SUP
      ASU,COM,DYS,LIB,SUD,WF3
      SUR
      ASU,FRF,SUD
      TOM
      MAD,NCB,PMP,SMP,TSA
      TUM
      COM,DXF,DYS,LIB,PA3,SOM,SPA,SPN,TU3,WF3
      ZAN
      ANI,ANS,FEM,NAS,SPM
      ZMD
      ASS,ASU,CDS,COM,DEV,DRA,DRS,DR2,DXF,DYS,FEA,FON,FRF,GEO,IGC,IGI,KIN, LIB,N4D,PA3,PBG,SOE,SOM,SPA,SPN,SUD,WF3
      ZMG
      MAA,MAD,NCB,NCR,NC3,NC5,PMA,PMP,TSA,TUR

    Program Considerations

    There are no additional programming considerations for installing CATIA Solutions Version 4


    Installation Instructions

    This chapter describes the installation method to install the functions of CATIA Solutions Version 4. The Installation Guide, SH52-1189 contains the step-by-step procedures to install the functions of CATIA Solutions Version 4. The Planning and Administration Guide, SH52-0601 contains the step-by-step procedures to activate the functions of CATIA Solutions Version 4.


    Installing CATIA Solutions

    Overview

    CATIA Solutions medium contains all deliveries necessary to install all available products and options. As you probably have not ordered all products or wish to install all options, you will be required to select the deliveries during installation; make sure before beginning installation that you have a list of your ordered products.

    CATIA Solutions installation procedures are based on a Graphical User Interface (GUI). To access to this GUI you have to unload it before installing CATIA Solutions, after logging under root userid,

    Refer to "Activating CATIA Solutions" for more information.

    Installation on previously installed lower CATIA levels

    Known problem during CATIA 420 refresh 1 installation

    WARNING

    From Catia Installation menu, selecting "all" as software to Unload leads to an error with following message issued:

      WFIS00014 - Nothing has been unloaded
      Unloading failed.
    

    RECOMMENDATION

    On the Catia Installation Menu, click on the "..." button and on the "Software to unload" panel click on "Select All" button to unload all the products/configurations.

    USERS AFFECTED

    CATIA administrators and users

    PRODUCT AFFECTED

    All CATIA products

    NLS Considerations

    The installation procedure takes into account the language you want to use. When creating the administrator environment your are prompted to select the language you want. All CATIA and Motif resources are created or referenced according to this language. This is done by the inilang shell run by the installation procedure.

    WARNING
    Since 420 level, the only mode available for working with code page on AIX platform is the National Language Support active mode in CATIA data as for other UNIX platforms, that is CATSITE.CODE_PAGE_SUPPORT set to TRUE.

    WARNING
    Before creating the administrator environment, check that you have at least a 'COM' license available. This step uses CATFONT to create CATIA fonts indexed by the value of the LANG environment variable and the CATFONT execution requests a 'COM' license.

    You can then update the administrator environment for another language. This is done by the addlang shell you must run yourself.

    It is not advised to use telnet to create/update administrator environments and to launch the addlang shell from a remote machine if you use a LANG value associated with a DBCS code page (Ja_JP, ko_KR, zh_TW, zh_CN).

    migration of user FONTDATAs to FONT and FONT CODE

    As of CATIA Version 5, the FONTDATA format will no longer be supported. Consequently, if you have user FONTDATAs, you must convert them to FONT and FONT CODE so that you will be able to use them in V5. This migration must be done in V4 using the CATFONT utility. V5 does not offer this migration tool.

    PROJECT File for National Language Support

    The PROJECT file used by CATIA must be labelled with the current code page used. This is automatically performed if you install your PROJECT file using the "Additional Features". If you want to use an existing not labelled PROJECT file or an existing PROJECT file encoded with a code page different from your current code page, run CATAIX against it using the keyword TO followed by the current code page.

    NLS Motif Resource Files and Multi-Platform Environment

    Until 417 level, Motif resource files such catia.font and catia.table set in $XAPPLRESDIR ($CAT_CUST/adm/xcfg by default) and $XAPPLRESDIR/$LANG directories, were depending on platform.

    In order to simplify customer environment, an evolution has been performed:

    Until 417 level, GII OPT Motif did not support font concatenation in Motif resource file. An evolution has been performed, in particular for DBCS languages for which sometimes we need to concatenate sbcs and dbcs Motif fonts.
    This evolution implies that character size modification functionality is not supported in this mode, this behaviour is the same as the behaviour provided by the HMKMOT routine.

    Motif Input Considerations for TEXTD2

    Until 417 level, TEXTD2 input textfields were managed through graPHIGS.

    Since 418 level the Motif input mode has been introduced in order to offer the benefit of AIX Motif input method usage, in particular Wnn6 for Japanese language.

    This new mode can be activated by setting the AIX_MOTIF_INPUT environment variable to any value (true for exemple).

    The default mode remains the graPHIGS input mode.

    Motif fonts for Quick Text in DBCS environment

    If you use the Tools/Quick Text (DR) item or the /quitxt command for Drafting DBCS Annotation creation or modification you have to declare appropriate Motif fonts in order to allow national character input in the Motif editor window.

    The way to do this, is the following:

    in your $HOME directory create a file named Dialog and containing the following lines :

    AIX 4.3.2 and Japanese language support

    Until AIX 4.3.1 included, Ja_JP default japanese locale was associated with IBM-932 code page.

    Since AIX 4.3.2, Ja_JP default japanese locale is associated with IBM-943 code page. IBM-932 code page is supported via the Ja_JP.IBM-932 locale.

    CATIA supports IBM-932 code page. So for AIX 4.3.2, the support of the Ja_JP.IBM-932 locale name has been introduced.

    Note that if your AIX japanese environment is based on AIX 4.3.2 you can not use Ja_JP locale, you have to use Ja_JP.IBM-932. Ja_JP is associated to IBM-943 code page, so if you use it, it will be not consistent neither with the Motif resources referenced by CATIA, nor with the CATIA font indexation and code page tables.

    Euro Character Support

    Euro character is supported as an Engineering Symbol, and as such follows the general rules applying to Engineering Symbols. A thirteenth engineering symbol has been introduced and is supported in the CATIA fonts which already support the other engineering symbols, and in the Motif CATIA environment files which already support the other engineering symbols.

    As engineering symbol, the euro character input is managed through the key combination : Ctrl+Alt+F.

    NT Compatibility in file names

    In order to prevent UNIX end-user using characters not available for NT platform supported with CATIA V5 product line, a new value for the CATIA.CHARACTER_RANGE_FOR_MEMBER_NAME parameter has been introduced : NT_COMPATIBILITY.

    This value induces the same behaviour as the UNIX_COMPATIBILITY_EXCEPTED_CTRL value with the following differences :

    SOLIDE function considerations

    WARNING

    Multi-Model Links: better support of the *SKD element in the CHANGE LINK(S) commands

    automatic change of the link definitions in the CHANGE ALL ? LINKS command. This can be done also on all the model solids by multi-sel.

    RECOMMENDATION

    USERS AFFECTED

    Users of SOLIDE function

    PRODUCT AFFECTED

    SOE

    SOLIDE function considerations

    WARNING

    The following logics can be added to the USRENV.dcls file:

    RECOMMENDATION

    It is recommanded to use the new boolean software if no CATBACK is planned for a project. USERS AFFECTED

    Users of SOLIDE function

    PRODUCT AFFECTED

    SOE

    SOLIDE function considerations

    WARNING

    Performance of boolean operations is improved for operations between multi-bodies solids.

    USERS AFFECTED

    Users of SOLIDE function

    PRODUCT AFFECTED

    SOE

    CATIA.Assembly Modeling

    WARNING

    The default allocation size for models in CATIA.Assembly Modeling workbench ('catasm' or Tools/Assembly'... commands) can be tuned.

    RECOMMENDATION

    Tuning can be achieved setting the CATIA_MODEL_EXTEND_ALLOC_KBYTES environment variable,

    USERS AFFECTED

    Users of the Assembly workbench capabilities.

    PRODUCT AFFECTED

    CATIA.Assembly Modeling


    WARNING

    The management of .asm files generation from CATIA session has been improved.

    RECOMMENDATION

    The generation of Assembly files from CATIA session searches within the Search Order a file .asm matching exactly each model, and re-uses it if it is found.

    USERS AFFECTED

    Users of the Assembly workbench capabilities.

    PRODUCT AFFECTED

    CATIA.Assembly Modeling

    Support of IBM License Use Management

    WARNING

    Since V420 Refresh 1, CATIA on AIX no longer offers the possibility of setting up licensing using IFOR/LS. It is now replaced by IBM License Use Management Runtime Version 4.0.

    USERS AFFECTED

    CATIA Administrators and users

    PRODUCT AFFECTED

    All CATIA products

    Catlicst command

    WARNING

    Catlicst does not function correctly.

    RECOMMANDATION

    Recommandation is to copy catlicst shell from previous CATIA releases starting from CATIA 419 refresh 01. An other alternative is to replace delivered catlicst shell by the following one:

    #|/bin/ksh
    #----------------------------------------------------------------------------
    # stop all CATIA License Servers (CATLICS(R/L) processes) on local node
    #----------------------------------------------------------------------------
    # usage : catlicst
    #----------------------------------------------------------------------------
    HOST=`uname -n`
    echo " "
    echo ">>> Stop all CATIA License Servers on local node $HOST <<<"
    SERVER_MODULE="CATLICSL"
    for serv in $SERVER_MODULE
       do
          NBSR=`ps -ef | grep $serv | grep -v grep | wc -l`
          PORT=`ps -ef | grep $serv | grep -v grep |
                nawk -v serv=$serv '{if ($8 == serv) print $9;
                                     if ($9 == serv) print $10}'`
          [ $NBSR -eq 0 ] && echo "    no $serv server currently running"
          [ $NBSR -eq 1 ] && echo "    1 $serv server currently running"
          [ $NBSR -ge 2 ] && echo "    $NBSR $serv servers currently running"
          echo " "
          for p in $PORT
             do
                catlicad $HOST $p
             done
       done
    exit
    
    (where ` is the grave accent)
    
    

    This problem will be fixed in the next PTF.

    USERS AFFECTED

    CATIA Administrators and users

    PRODUCT AFFECTED

    All CATIA products

    Note:

    IPA product considerations

    WARNING

    IPA product enables implicit creation of some FDT product data (the FDT features). IPA enables also retreival of FDT feature by graphical selection of geometric solid shapes.
    From release 421 on, FDT features can be created by two ways on solid shapes:

    This choice is not easily managable by the users since RSUR/FSUR concept is not to be understood by regular users, and that the choice is indicated by a declarative logical variable.

    The mix of the 2 types of FDT feature creation on a given model, will lead to confusion for the user because:

    RECOMMENDATION

    By default, without declarative variable set, the FDT features are created by pointing to the RSUR of a solid shape.

    The declarative enabling the alternative choice of FSUR is:

        CATDRAW.FDT.FSUR.SELECTION : LOGICAL ;
        CATDRAW.FDT.FSUR.SELECTION = TRUE ;
    

    On the contrary, if CATDRAW.FDT.FSUR.SELECTION = FALSE; then RSUR are taken.

    These declaratives are explained in CATIA.Functional Dimension. & Toler (FDT) product documenttion.

    Recommendation for the administrator about the choice to be applied are:

    1. Nor IPA, neither FDT product have been used on the site under previous releases (and you may not get CATIA models from a customer that may include IPA or FDT data created under previous releases).
      Then do not set this declarative and work in default mode (RSUR).

    2. Your site has (or may get) CATIA models containing FDT or IPA data created under previous releases. (And your site may not get models from another 421 site under different declarative settings as yours).
      Then set the declarative at TRUE (in order to work in previous release mode by pointing FSUR).

    3. You have (or may get) CATIA models created on previous releases containing FDT or IPA data (FSUR mode)
      and in addition you may now get CATIA models created on other sites with CATIA 421 release including FDT or IPA data (FSUR or RSUR mode).
      (Or users want to change from previous release mode into the new one of RSUR pointers.)

      Then set the declarative to FALSE (new RSUR mode) and forward these recommendations to the users:

    USERS AFFECTED

    Administrator
    Users of models created under previous CATIA releases and containing FDT or IPA data.

    PRODUCT AFFECTED

    CATIA.Inspection Planning Assistant
    CATIA.Functional Dimension. & Toler

    Euclid Styler to CATIA V4

    WARNING

    The documentation of STC is not included on the CD-Rom with the CATIA Electronic Documentation, but on the software media, as a pdf file : STYLERtoCATIA.pdf

    In case several Styler or STRIM Models containing shells are opened in one same CATIA session, or when opening models containing huge shells, some original faces may be missing in the CATIA model due to a lack of memory.

    RECOMMANDATION

    The STYLERtoCATIA.pdf file is downloaded during STC product installation, and is located under $CATIA/adm/readme/ STYLERtoCATIA.pdf

    Possible by-passes to the lack of memory problems for faces : open one single model in one CATIA session, or split the models into several smaller sub-models in Styler or STRIM function.

    This problem is identified and will be fixed soon via a PTF.

    STF product considerations

    WARNING

    The new capability related to the generation of unpecified section using the sketcher integrated with the CATSEC utility has been de-activated in order to prevent corrupted data generation. It will be activated on an official ptf.

    RECOMMENDATION

    USERS AFFECTED

    PRODUCT AFFECTED

    SHD product considerations

    WARNING

    The new capability related to the generation of unpecified section using the sketcher integrated with the CATSEC utility has been de-activated in order to prevent corrupted data generation. It will be activated on an official ptf.

    RECOMMENDATION

    USERS AFFECTED

    PRODUCT AFFECTED


    Activating CATIA Solutions

    Detailed steps to get the program into operational status are defined in "CATIA Solutions Installation Guide" (SH52-1189).

    It is recommended to perform the installation in an empty $CAT_UNLOAD directory.

    Here is a summary for installation from CDROM

    1. Log in with root userid

    2. Register licenses

    3. Insert CDROM in drive

    4. Mount your CD-ROM drive to the /cdrom directory by entering the following command:
         mount -v cdrfs -r /dev/cd0 /cdrom
      

    5. Go to / directory:
       cd /
      

    6. Start the CATIA installation by typing:
       /cdrom/START
      

      1. unload software you ordered

        as Mechanical code is delivered on 2 CD-ROMs, the GUI Installation tool may ask you for the second CD-ROM:

        • eject first CD-ROM
        • insert the second CD-ROM

      2. configure installation

    7. Check licenses declarations

    8. Log in with administrator userid and run CATIA

    Here is a summary for installation from tape

    1. Log in with root userid

    2. Register licenses

    3. Insert tape in drive

    4. Choose the directory where to unload CATIA, by setting CAT_UNLOAD variable:
       CAT_UNLOAD=/usr/catia/unload ; export CAT_UNLOAD
      
      (if using sh or ksh),
       setenv CAT_UNLOAD /usr/catia/unload
      
      (if using csh).

    5. Create the unload directory:
       mkdir -p $CAT_UNLOAD
      

    6. Go to this directory:
       cd $CAT_UNLOAD
      

    7. unload CATIA starter:
       tar xv
      

    8. Enter in GUI installation procedure:
       PATH=$CAT_UNLOAD/code/bin:$PATH ; export PATH
      
      (if using sh or ksh),
       setenv PATH /usr/catia/unload:$PATH
      
      (if using csh)
       catinst
      

      1. unload software you ordered

      2. configure installation

    9. Check licenses declarations

    10. Log in with administrator userid and run CATIA

    Service Instructions

    The code for CATIA Solutions Version 4 Release 2.2 will be maintained as follows:

    Problem reporting:

    Customers should report defects through their standard support structures, who will open PMRs into RETAIN using the standard procedures (including the pertinent CATIA SOLUTION V4R1 COMPID). These PMRs will be processed by the L1/L2/L3 organizations and APARs will be opened for valid defects.

    RETAIN Call Priority is assigned by the support organization raising the call. Priority assigned to a call cannot be higher than the PMR severity.

    Preventive Service:

    Preventive Service will be available via Refresh Levels distributed by the IBM Program Distribution channel.

    It is highly recommended to apply the Refresh Levels released in order to keep current.

    Corrective Service:

    Fixes for valid Show Stoppers can be provided upon request by PTFs (Program Temporary Fix) available through the standard IBM/RETAIN and Corrective Service Distribution processes.

    A Showstopper is :

    In any case, valid defects are fixed in the Refresh Level that is current for development in the change team.

    Information on maintenance products :

    The Preventive Service Planning bucket is regularly updated with information and recommendations about maintenance products, including:

    Customers should request from their support organization an extract of the information and recommendations that are provided in the PSP bucket.


    Program and Service Level Information

    This section identifies the program and any relevant service levels of CATIA Solutions. The program level refers to the APAR fixes incorporated into the program.


    Program Level Information

    The following APAR fixes against previous level of CATIA Solutions have been incorporated into this release:

    APAR list sorted by CATIA Function name

    /ANND34       HC47057
    /NAV4D        HC38575   HC39389   HC39841   HC40306   HC40973   HC41158
                  HC41321   HC42256   HC42483   HC43007   HC43041   HC43435
                  HC43436   HC43468   HC43548   HC43829   HC43833   HC43962
                  HC44061   HC44162   HC44203   HC44238   HC44701   HC44821
                  HC45130   HC45200   HC45205   HC45703   HC46125   HC46378
                  HC46382   HC46403   HC46553   HC46611   HC46618   HC46703
                  HC46718   HC46991   HC46995   HC47007   HC47339   HC47409
                  HC47417   HC47425   HC48051   HC48279   HC48532   HC48660
                  HC48991   HC49183   HC49626   HC50911   HC51143   HC51374
                  HC51671   HC51684   HC51775   HC51782   HC52451
    ADMIN         HC50376
    ADPEXTR       HC09354   HC42583   HC44899   HC45185   HC47789   HC48443
                  HC48490   HC50182   HC50392   HC50591   HC52100
    AEC_TEXT      HC49386   HC50315   HC50368   HC52018
    AECMNGT       HC44088   HC47716   HC49450   HC49982   HC51169
    AECPRIM       HC41980   HC45814   HC45846
    AECSHAP       HC43635
    ALIASCAT      HC36202
    ANAERO        HC52358
    ANALYSIS      HC40719   HC46023   HC48436   HC49916
    ANELFINI      HC43368   HC46347   HC47254   HC47485   HC47976   HC49588
                  HC51125   HC51878
    ANMANAGE      HC43399   HC44418   HC45015   HC45769   HC47325   HC47800
                  HC47853   HC48555   HC48728   HC50527   HC51943
    ANMESH        HC43411   HC44291   HC44546   HC45337   HC46130   HC46451
                  HC46461   HC46555   HC46578   HC46601   HC47088   HC47557
                  HC47563   HC47792   HC51064   HC51227   HC51265
    ANPHYSIC      HC42122   HC45916   HC48185
    ANSEMBLY      HC46587   HC47989
    ANSOLID       HC42721   HC42980   HC43440   HC48011   HC49057   HC49090
                  HC50125   HC51002
    ANVISU        HC41012   HC43581   HC45420   HC46430   HC46681   HC47330
                  HC47405   HC47990   HC50451   HC51072   HC51204
    ARC           HC40638
    ASSEMBLY      HC45850   HC46547
    AUXVIEW       HC41518   HC47957
    AUXVIEW2      HC42682   HC42886   HC42916   HC43609   HC43657   HC43853
                  HC43901   HC43976   HC44464   HC44487   HC44609   HC44632
                  HC44886   HC45306   HC45611   HC45898   HC45946   HC46170
                  HC47359   HC47391   HC47398   HC47718   HC47848   HC47911
                  HC47961   HC48314   HC48487   HC48518   HC48582   HC48686
                  HC48860   HC48942   HC49313   HC49346   HC49370   HC49374
                  HC49731   HC49785   HC49789   HC50062   HC50144   HC50338
                  HC50554   HC50609   HC50726   HC50934   HC51256   HC51464
                  HC51637   HC51981   HC52754
    BEAM          HC41427   HC42443   HC43922   HC44084   HC44131   HC44145
                  HC44350   HC44895   HC44906   HC45250   HC45682   HC45869
                  HC45874   HC45929   HC47595   HC47675   HC48086   HC48094
                  HC48798   HC49656   HC51172
    BENDPART      HC42476   HC42495   HC43891   HC44934   HC44960   HC45553
                  HC45982   HC46081   HC46674   HC46912   HC47246   HC47969
                  HC48071   HC48322   HC48390   HC48836   HC48837   HC49259
                  HC49260   HC50597   HC51091   HC51212
    CATAIX        HC44584   HC45840
    CATALIAS      HC40115
    CATBACK       HC44232   HC47796   HC50829
    CATCDMA       HC42660   HC43075   HC43214   HC43414   HC43531   HC43543
                  HC43803   HC43872   HC44092   HC44133   HC44612   HC44643
                  HC44743   HC44979   HC46230   HC46544   HC46719   HC46825
                  HC47060   HC47338   HC47467   HC49847   HC50550   HC50583
                  HC50605   HC50684   HC50690   HC50948   HC51037
    CATCLN        HC44707   HC44993   HC45263   HC45623   HC45854   HC46315
                  HC46330   HC47686   HC48298   HC49779   HC49823
    CATDATA       HC41654
    CATDLA        HC43237
    CATDRAW       HC47183   HC47950
    CATDXF        HC31952   HC40399   HC41048   HC41522   HC42642   HC42968
                  HC43913   HC45121   HC47019   HC48570   HC49972
    CATEXP        HC43755   HC48866
    CATFEA        HC42454
    CATFONT       HC45572   HC48830
    CATIGE        HC42317   HC45092   HC45765   HC49298   HC49471
    CATITF        HC44767   HC49448   HC49861   HC51904
    CATKI         HC48015
    CATMFG        HC50180
    CATMOD        HC45378   HC45920
    CATNC         HC40275   HC40800   HC46117
    CATN4D        HC44504   HC46317
    CATPLOT       HC43475   HC44573   HC45604
    CATSIM        HC43111   HC44271   HC44732
    CATSOE        HC47509
    CATSTP        HC45631
    CATST1        HC44015
    CATUNIT       HC51371
    CATWEB        HC40913   HC44639   HC45683   HC48286   HC48302   HC48375
                  HC50490
    CDM           HC41917   HC43511   HC44468   HC45785   HC49571   HC50262
                  HC50817
    CDP           HC42649   HC45510   HC48145   HC48149
    COMMUNIQ      HC21333
    CONV_DES      HC44986   HC50848
    COUPLER       HC08378   HC44760   HC45855   HC46448   HC46622   HC50979
    COV_ENG       HC43242   HC44768   HC44786   HC49815   HC49870
    CSB           HC43772   HC52251   HC52302
    CURVE1        HC44069   HC44217   HC45827   HC46987   HC47380   HC47641
                  HC48326   HC48456   HC48936   HC49101   HC49213   HC49439
                  HC51910
    CURVE23D      HC50914
    DATABASE      HC41229   HC44744   HC44891   HC46051   HC46429   HC47558
                  HC47659   HC48194   HC48576   HC48656   HC49926   HC50862
                  HC51237
    DETAILDR      HC31133   HC43940   HC44683   HC46730   HC46828
    DETAIL3D      HC43049
    DIMENS2       HC39112   HC39537   HC41485   HC41651   HC43161   HC43518
                  HC43563   HC43660   HC43739   HC45053   HC46222   HC46872
                  HC48750   HC49433   HC49818   HC51303
    DUCTWORK      HC06560   HC07327   HC39102   HC42535   HC43494   HC48982
    DXFCAT        HC37405   HC42303   HC43905   HC46888   HC47513   HC48448
    EQUIP         HC41969   HC43257   HC43344   HC49177
    ERASE         HC46916   HC48547
    E3FORMBD      HC47542   HC48701   HC49424   HC49587   HC50266   HC51028
    E3INSTAL      HC40876   HC41221   HC42966   HC42988   HC43817   HC44304
                  HC44568   HC44577   HC45096   HC46487   HC46932   HC46999
                  HC48462   HC49410   HC51005   HC51559
    E3MANAGE      HC45078   HC46536   HC48130   HC50613
    E3PLACE       HC47985   HC48102   HC48414   HC49139   HC50255
    FD&T          HC41751   HC42221   HC42437   HC45145   HC45179   HC45232
                  HC45287   HC45587   HC45806   HC45966   HC46573   HC46900
                  HC47489   HC47493   HC48303   HC49579
    FILE          HC38990   HC39479   HC39727   HC41488   HC41928   HC42735
                  HC42780   HC43229   HC43243   HC43503   HC43701   HC43808
                  HC44089   HC44175   HC44185   HC44372   HC44601   HC45006
                  HC45667   HC45711   HC46155   HC46603   HC46643   HC47003
                  HC47172   HC47258   HC47267   HC47304   HC47378   HC47690
                  HC48221   HC48775   HC49031   HC49143   HC49398   HC49487
                  HC49685   HC49688   HC50035   HC50119   HC50944   HC51009
                  HC51831
    FITTING       HC42036   HC42146   HC43083   HC45981   HC51846
    FORMTOOL      HC43099   HC43465   HC43972   HC45716   HC46048   HC51061
    GCWCCV        HC46742
    GCWSMZ        HC42386
    GFMNOD        HC43589   HC43937
    GIERAS        HC43823
    GIFDDN2       HC41931
    GIRMAT        HC42067
    GIRMCO        HC45652
    GIRSGS        HC44338
    GJBCOM        HC44807   HC49419
    GLOBDEF       HC49717
    GRAB          HC51701
    GRAPHIC       HC42414   HC42592   HC47271
    GSCCPS        HC52042
    GSCPLS        HC43259
    GSDISO        HC40372
    GSMPMB        HC48318
    GYYCNV        HC49888   HC49934
    IDENTIFY      HC45695
    IGECAT        HC39205   HC41675   HC43210   HC45311   HC46496   HC46802
                  HC46896
    INSTIX        HC42225   HC46053   HC48394
    INTERFER      HC39476
    ISO_EXTR      HC44243   HC44865   HC50794   HC51253   HC51340   HC51391
    ISOSETUP      HC50120
    IUA           HC48331
    KEEP          HC42192   HC46064
    KINEMAT       HC38701   HC45725   HC45728   HC47299   HC48172   HC51474
                  HC51958
    KINEMUSE      HC43720   HC44868   HC44974   HC45297   HC45733   HC46270
                  HC46868   HC48019   HC49356   HC50115   HC50345
    LIMIT1        HC45094
    LIMIT23D      HC43190   HC43980   HC45773   HC46732   HC47964   HC48764
                  HC48825   HC48975   HC50156   HC51332
    MERGE         HC40970   HC43706   HC45262   HC46943   HC47637
    MFGDIES       HC46040   HC47722
    MFGPROG       HC41672   HC41760   HC42424   HC42507   HC42885   HC42894
                  HC42901   HC43035   HC43079   HC43198   HC43392   HC43402
                  HC43724   HC43726   HC44313   HC44325   HC44403   HC44507
                  HC44756   HC44826   HC44941   HC44942   HC45198   HC45321
                  HC45370   HC45467   HC45503   HC45517   HC45525   HC45620
                  HC45997   HC46072   HC46359   HC47220   HC47458   HC47725
                  HC47765   HC47821   HC47890   HC47891   HC47903   HC47938
                  HC48108   HC48217   HC48274   HC48526   HC48662   HC48824
                  HC48887   HC48909   HC49011   HC49093   HC49098   HC49123
                  HC49127   HC49225   HC49252   HC49257   HC49335   HC49378
                  HC49382   HC49601   HC49782   HC49859   HC49931   HC49965
                  HC50253   HC50374   HC50383   HC50387   HC50397   HC50416
                  HC50426   HC50432   HC50502   HC50505   HC50534   HC50543
                  HC50559   HC50568   HC50570   HC50576   HC50579   HC50588
                  HC50615   HC50687   HC50689   HC50702   HC50709   HC50734
                  HC50735   HC50769   HC50770   HC50772   HC50838   HC50907
                  HC51010   HC51053   HC51097   HC51110   HC51129   HC51203
                  HC51276   HC51359   HC51493   HC51563   HC51573   HC51579
                  HC51604   HC51623   HC51657   HC51663   HC51824   HC51898
                  HC51912   HC51920   HC51953   HC51992   HC52171   HC52364
    MFGVIEW       HC47316
    MODEL         HC45233
    MODELS        HC45244   HC47231   HC50377   HC50389   HC50878
    MONITIX       HC41406   HC41862   HC50634
    NAV4D         HC43550   HC44065   HC44394
    NCMILL        HC41891   HC44455   HC44642   HC46892   HC46904   HC49080
                  HC49116
    NCVERIF       HC44939   HC49076   HC49131   HC49651   HC49663   HC49671
    P&ID          HC11006   HC46810
    PARAM3D       HC36383   HC40546
    PATCH         HC46416   HC47726
    PATHWAYS      HC43702   HC43952   HC44011   HC44016   HC44033   HC44078
                  HC49226   HC49244   HC50586   HC50745   HC50806
    PATTERN       HC47551
    PIPE_DES      HC21430   HC41421   HC43997   HC47497   HC49274   HC49282
                  HC49643
    PIPSETUP      HC41972   HC42949   HC43915   HC45745   HC46104   HC46112
                  HC46920   HC47827   HC48789   HC50133
    PLOT          HC43606   HC44167   HC44285   HC44359   HC44377   HC44483
                  HC45591   HC46120   HC46950   HC48039   HC48183   HC48410
                  HC48735   HC48736   HC48905   HC49331   HC50941   HC51248
    POINT3D       HC46595   HC49907
    PRINT         HC43650   HC50288
    PRJ_SHIP      HC44309   HC46948   HC48399   HC49875
    PSN           HC42138   HC44112   HC44207   HC44689   HC44715   HC44875
                  HC45276   HC46300   HC46306   HC46412   HC46475   HC46955
                  HC46962   HC47205   HC47453   HC48167   HC48206   HC48295
                  HC48522   HC49519   HC50453   HC50960   HC51103   HC51121
                  HC51218   HC51494   HC52146
    PUBLISH       HC42857   HC47839
    RASTER        HC45993
    REPORTER      HC43282   HC46446   HC51433   HC51978
    ROBUSE        HC46256   HC48543
    RULFILET      HC50463
    RW_DES        HC51750
    S.T.L.        HC44604
    SHAPE         HC51770
    SHM_AERO      HC40512   HC40521   HC40557   HC41429   HC41847   HC41977
                  HC42091   HC42178   HC42404   HC42457   HC42461   HC42532
                  HC42797   HC42814   HC42818   HC42940   HC43053   HC43056
                  HC43067   HC43087   HC43091   HC43224   HC43231   HC44708
                  HC44736   HC44897   HC44925   HC45635   HC46662   HC47061
                  HC47568   HC48586   HC48870   HC49169   HC49253   HC50302
                  HC51181
    SKETCHER      HC41133   HC44957   HC45176   HC47565   HC47736   HC47761
                  HC48034   HC50217   HC50220   HC50439   HC51542   HC51549
                  HC51647   HC51792   HC52341   HC52677
    SKIN          HC40606   HC42028   HC42432   HC42485   HC42762   HC42847
                  HC43179   HC43236   HC43374   HC43593   HC43715   HC43734
                  HC43741   HC43836   HC43837   HC43864   HC44140   HC44190
                  HC44317   HC44442   HC44491   HC44648   HC44679   HC44872
                  HC45017   HC45214   HC45647   HC46252   HC46526   HC46632
                  HC47097   HC47668   HC47705   HC47777   HC47782   HC47787
                  HC47977   HC48078   HC48082   HC48332   HC48551   HC49575
    SOLIDE        HC28593   HC35032   HC35462   HC36088   HC36685   HC36712
                  HC37045   HC37455   HC37942   HC38722   HC38982   HC39800
                  HC40014   HC40053   HC41046   HC41078   HC41713   HC41911
                  HC42220   HC42246   HC42291   HC42311   HC42401   HC42469
                  HC42550   HC42556   HC42632   HC42713   HC42964   HC43195
                  HC43219   HC43238   HC43375   HC43409   HC43427   HC43447
                  HC43458   HC43486   HC43508   HC43512   HC43530   HC43564
                  HC43572   HC43584   HC43791   HC43819   HC43880   HC43926
                  HC44007   HC44047   HC44070   HC44085   HC44115   HC44137
                  HC44178   HC44198   HC44226   HC44251   HC44276   HC44306
                  HC44407   HC44564   HC44567   HC44661   HC44720   HC44814
                  HC44835   HC44853   HC44859   HC44972   HC44997   HC45028
                  HC45039   HC45063   HC45070   HC45074   HC45093   HC45113
                  HC45143   HC45152   HC45156   HC45189   HC45193   HC45299
                  HC45356   HC45558   HC45627   HC45715   HC45780   HC45863
                  HC45871   HC45878   HC46137   HC46180   HC46251   HC46291
                  HC46326   HC46340   HC46346   HC46349   HC46366   HC46396
                  HC46413   HC46506   HC46516   HC46558   HC46654   HC46717
                  HC46743   HC46760   HC46766   HC46774   HC46812   HC46830
                  HC46855   HC46983   HC47059   HC47084   HC47123   HC47235
                  HC47274   HC47334   HC47347   HC47531   HC47599   HC47731
                  HC47757   HC47835   HC47836   HC47904   HC48054   HC48110
                  HC48158   HC48287   HC48313   HC48327   HC48346   HC48367
                  HC48450   HC48472   HC48473   HC48477   HC48668   HC48705
                  HC48809   HC48844   HC48946   HC48957   HC49015   HC49020
                  HC49035   HC49072   HC49135   HC49145   HC49196   HC49197
                  HC49290   HC49309   HC49340   HC49350   HC49359   HC49526
                  HC49584   HC49592   HC49604   HC49633   HC49637   HC49797
                  HC49811   HC49856   HC50027   HC50036   HC50047   HC50057
                  HC50073   HC50082   HC50090   HC50098   HC50128   HC50198
                  HC50206   HC50243   HC50327   HC50400   HC50493   HC50538
                  HC50561   HC50666   HC50952   HC51031   HC51045   HC51151
                  HC51217   HC51383   HC51403   HC51592   HC51690   HC51713
                  HC52324   HC52336
    SOLIDM        HC44258
    SPCDRW        HC44433
    SPCDR2        HC42506   HC45955   HC49431
    SPTCREAT      HC45258
    SPTPLACE      HC42648
    ST_BUILD      HC48334   HC48802
    ST_FRAME      HC42644   HC45619   HC47034   HC47584   HC47986   HC48219
                  HC48778   HC52141
    STPCAT        HC38978   HC46426
    STRUCTUR      HC49268
    STUDIO        HC43780   HC43938   HC44327   HC44381   HC44474   HC44904
                  HC44918   HC45676   HC45837   HC45844   HC47212   HC47345
                  HC47740   HC47754   HC47811   HC47930   HC48038   HC51272
                  HC51394
    ST1CAT        HC44578
    SURF1         HC43383   HC50722
    SURF2         HC45530   HC50077
    SW_DESGN      HC41209   HC41640   HC43688   HC44119   HC44664   HC45605
                  HC45810   HC46039   HC46052   HC46068   HC47785   HC47974
                  HC48530   HC48772   HC49454   HC49917   HC49921   HC49925
                  HC49954   HC50059   HC50089   HC50100   HC50139   HC50159
                  HC50203   HC50281   HC50825   HC50963   HC51291   HC51477
                  HC51627   HC51822
    SW_SETUP      HC47781   HC48363
    TEXTD2        HC41993   HC42810   HC42823   HC43707   HC43988   HC45697
                  HC49453   HC51366
    TRANSFOR      HC46517   HC47217
    TUBING        HC45228   HC45256   HC46193   HC49053   HC49320   HC51680
                  HC51685
    
    

    APAR List sorted by Alphanumerical order and their Abstract

    ********************************************************************************
               APAR LIST SORTED BY ALPHAMERICAL ORDER WITH THEIR ABSTRACT
    
    ********************************************************************************
    HC06560   DUCTWORK :
    bad part connector data when placing non resolved parts in ductwork, raceway
    and conveyor
    
    HC07327   DUCTWORK :
    Certain custom parts fail with invalid parameters on placement.
    
    HC08378   COUPLER  :
    CADCAT - 'Truncated cone' AEC primitives are transferred with the top radius
    set to zero.
    
    HC09354   ADPEXTR  :
    ADP_EXTR : INCORRECT AEC TAG VALUES WHEN SITE IS IN INCHES. e.g. STR SHOULD BE
    100 inches, displays as 3937.008.
    
    HC11006   P&ID     :
    P&ID : Unable to create connectors in a mm site.
    
    HC21333   COMMUNIQ :
    APAR OPENED TO ENABLE THE SUPPORT OF AIX 4.3 WITH CGW (CATIA CONFERENCING
    GROUPWARE) (HC20068 continued)
    
    HC21430   PIPE_DES :
    P&ID/PIPING INTEGRATOR : Performance problems when analyzing the pipelines in
    Schematic/3D, analysis takes too lon
    
    HC28593   SOLIDE   :
    SOLIDE OPERATN DRAFT trying to draft a cylinder in both sides mode with a skin
    as parting element leads to an ABEND
    
    HC31133   DETAILDR :
    DETAIL / MODIFY / TRANSLAT / FLIPX FLIPY : causes leader of baloon to be lost.
    
    HC31952   CATDXF   :
    CATDXF GIVES MDA MALLOC ERROR FROM A SPECIFIC CATIA MODEL
    
    HC35032   SOLIDE   :
    FILLET WILL BE INACTIVATED AFTER UPDATE
    
    HC35462   SOLIDE   :
    SOLIDE OPERATN FILLET EDGE leads to the error message INTERNAL ERROR selecting
    all redges of a prism.
    
    HC36088   SOLIDE   :
    SOLIDE + OPERATN + FILLET + EDGE : the shape of the fillet seems to be strange
    
    HC36202   ALIASCAT :
    ALIASCAT - FAILS IN ABENDS11 ON A SPECIFIC INPUT FILE.
    
    HC36383   PARAM3D  :
    PARAM3D / ADVANCE / COMPUTE .MESSAGE INTERNAL ERROR OCCURS AFTER COMPUTATION .
    
    HC36685   SOLIDE   :
    Following a SOLIDE IMPORT, a thickness appears as not computed and an
    unresolved fillet cannot be recovered via Rer
    
    HC36712   SOLIDE   :
    MULTIMODEL USE CHECK LINKS, MODELS ARE READ AS PASSIVE
    
    HC37045   SOLIDE   :
    Cannot perform check link on multimodel solid comming from another CDMA site
    
    HC37405   DXFCAT   :
    DXFCAT DOES NOT HONOR STANDARDS OF A STARTUP MODEL .
    
    HC37455   SOLIDE   :
    CATCLN DETECTED ERR59, ERR60 JUST AFTER DRAFT CREATION
    
    HC37942   SOLIDE   :
    SOLIDE / CREATE / SWEEP COMPUTES CORRUPTED GEOMETRY IF THE CENTER CURVES IS AN
    HELIX AND THE CONTOUR TOO LARGE (COL
    
    HC38575   /NAV4D   :
    WHEN USING WINDOW SHOW ACTIVE ON CDMA MODEL AND THEN LOADING THE MODEL INTO
    4DNAV => 4DNAV HANGSUP
    
    HC38701   KINEMAT  :
    Problem with multi-model link when using VPM
    
    HC38722   SOLIDE   :
    SOLIDE / UPDATE ERROR LIMIT CASE IN 419 R1 BSF.
    
    HC38978   STPCAT   :
    FACES NOT TRANSLATED AFTER A LOOP BACK TEST CATSTP/STPCAT.
    
    HC38982   SOLIDE   :
    SEWING OPERATION KEEPS THE WRONG SIDE OF THE SOLID.
    
    HC38990   FILE     :
    FILE/READ : BAD MANAGEMENT OF DIMS AND ARROWS IN MULTI-MODELS WITH DIFFERENTS
    UNITS
    
    HC39102   DUCTWORK :
    AREA CALCULATION DOESN T WORK CORRECTLY WHEN MODEL UNIT=1
    
    HC39112   DIMENS2  :
    Diameter or radius dimension is not possible with DIMENS2/QUICKDIM.
    
    HC39205   IGECAT   :
    IGECAT FAILS IN ABENDS11 FROM A SPECIFIC IGES FILE .
    
    HC39389   /NAV4D   :
    4DNAV : Coredump after loading a session with CACHE TIMESTAMP on model turned
    to OFF
    
    HC39476   INTERFER :
    INTERFER COMPUTE CLASH ONE GRP ERROR MESSAGE < UNABLE TO COMPUTE POLYHEDRAL
    FORM>
    
    HC39479   FILE     :
    STORED 4DNAV ARE NOT RE-USABLE
    
    HC39537   DIMENS2  :
    Partial dimension becomes whole dimension with DIMENS2/CREATE/ LENGTH
    
    HC39727   FILE     :
    Swaping models in a session leads to message : xx MODELS(S) CANNOT BE PASSIVE
    
    HC39800   SOLIDE   :
    A force update with SOLIDE UPDATE option Inactivate errors and continue fails
    with INTERNAL ERROR IMPOSSIBLE TRIM O
    
    HC39841   /NAV4D   :
    4DNAV : CRASH IN INTERFERENCE COMPUTATION OF SESSIONS
    
    HC40014   SOLIDE   :
    IMPOSSIBLE TO CHANGE THE LINK OF AN IMPORT
    
    HC40053   SOLIDE   :
    After revising skin (*SKD element) offset value with SKIN, the update of the
    attached solid in SOLIDE leads to INTE
    
    HC40115   CATALIAS :
    CATALIAS IMPOSSIBLE WHEN THERE IS A BLANK IN THE DLNAME .
    
    HC40275   CATNC    :
    CATNC GENERATES WRONG APTSOURCE - FEEDRATES LINES ARE OMITTED AFTER SOME
    SPECIFIC OPERATIONS
    
    HC40306   /NAV4D   :
    4DNAV CDMA : LOST OF POSITION WHEN READING BACK A SCENE WITH CDM MODELS.
    
    HC40372   GSDISO   :
    GSDISO : Msg  INVALID SOLID  1997 when the solide is displayed in SHADED mode.
    
    HC40399   CATDXF   :
    GEOMETRIC TOLERANCE SYMBOL NOT CONVERTED PROPERLY .
    
    HC40512   SHM_AERO :
    SHM_AERO.DELETING FASTENER HOLE IS INCREDIBLY LONG
    
    HC40521   SHM_AERO :
    SHM_AERO.PART EDITOR ACCESS TOO SLOW
    
    HC40546   PARAM3D  :
    PARAM3D CANNOT CREATE PARAMETER FROM A SOLIDE/COMPLEX/OFFSET CREATED WITH A SKD
    (SKIN FUNCTION)
    
    HC40557   SHM_AERO :
    SHM_AERO.TOO LONG TO CREATE FEATURES IN ASYNCHRONOUS MODE
    
    HC40606   SKIN     :
    SKIN / FORCE UPDATE - MODEL NOT ENTIRELY UPDATED
    
    HC40638   ARC      :
    ARC + CREATE + COMP OPT+PARM S : IMPOSSIBLE GEOMETRY MESSAGE DISPLAYS IN AIX
    ONLY AND NOT IN MVS
    
    HC40719   ANALYSIS :
    ANALYSIS / RELATIVE : REVERSES THE NO PICK MODE AFTER MAKING A DISTANCE BETWEEN
    A SOLIDE AND A SURFACE
    
    HC40800   CATNC    :
    RAPID STATEMENT IS MISSING IN APTSOURCE FILE GENERATED BY CATNC UTILITY.
    
    HC40876   E3INSTAL :
    Internal error in mml software message returned in E3INSTAL/ UPDATE after the
    transformation of an ES.
    
    HC40913   CATWEB   :
    General reliability enhancement for CATweb product 2.2 (REPORTER and AVM
    corrections)
    
    HC40970   MERGE    :
    Model error 700 at address 0 when merging a model in another model
    
    HC40973   /NAV4D   :
    4DNAV : GROUP GRAPH : QUERY ON ATTRIBUTE DOES NOT WORK IN THE GOOD WAY
    
    HC41012   ANVISU   :
    ANVISU : IMPOSSIBLE TO RUN CATSPM ON LARGE MODEL
    
    HC41046   SOLIDE   :
    SOLIDE  /OPERATN : IMPOSSIBLE TO MAKE A CHAMFER WITH MORE THAN ONE SURFACE
    
    HC41048   CATDXF   :
    CATUTIL / CATDXF LEADS TO AN ABEND S11 ON A SPECIFIC MODEL.
    
    HC41078   SOLIDE   :
    ABEND U104 IN SOLIDE/UPDATE
    
    HC41133   SKETCHER :
    Arc created with Sketcher are badly copied into CATIA.
    
    HC41158   /NAV4D   :
    4DNAV : ERROR IN DOCUMENT LOG WHEN LOADING BACK A SCENE IN WHICH WE HAVE SAVED
    THIS SCENE IN A GROUP GRAPH.
    
    HC41209   SW_DESGN :
    TX19 : Cannot create a composite web with curved plate as welded edge
    
    HC41221   E3INSTAL :
    A BNS IN FOLLOW MODE CANNOT BE CREATED IN A PASSIVE MODEL
    
    HC41229   DATABASE :
    catcdp fails in abend when switching from ITEM to MODEL object
    
    HC41321   /NAV4D   :
    Abend S11 with Studio Render in an AEC session
    
    HC41406   MONITIX  :
    ANALYSIS / LOGICAL / STANDARD FAILS WITH MESSAGE PID XXXXX RECEIVED A SIGSEGV
    FOR STACK GROWTH FAILURE
    
    HC41421   PIPE_DES :
    PIPE PARTS ARE NOT CREATED IN CURRENT LAYER BUT ALWAYS IN LAYER0
    
    HC41427   BEAM     :
    BEAM / ANALYSIS INDICATES THAT A BEAM, ALREADY UPDATED AFTER MOD IFICATIONS,
    STILL HAS TO BE UPDATED.
    
    HC41429   SHM_AERO :
    SHM_AERO.RETURN FLANGE ARROWS ARE WRONG DISPLAYED.
    
    HC41485   DIMENS2  :
    DIMENS2 / ADD gives error message : APPLICATIVE INTERNAL ERROR
    
    HC41488   FILE     :
    INCONSISTENT CPU REQUIRED TO PROCESS FILE LISTS
    
    HC41518   AUXVIEW  :
    AUXVIEW + DELETE OF VIEWS LIST LEADS TO ERROR 705 WHEN TRYING TO SAVE MODIFIED
    MODEL OR EXIT CATIA
    
    HC41522   CATDXF   :
    AFTER A LOOP BACK TEST CATDXF-DXFCAT SOME ELEMENTS ARE NOT TRANSLATED.
    
    HC41640   SW_DESGN :
    GENERAL RELIABILITY ENHANCEMENTS ON 421 SHD PRODUCT
    
    HC41651   DIMENS2  :
    POOR DIMENSION CAPABILITIES ON BENDED PIPES. ONLY END POINTS ARE TAKEN INTO
    ACCOUNT
    
    HC41654   CATDATA  :
    PROBLEMS WHEN USING CATDATA *DAT TO SPECIFY A RANGE OF DATES BEYOND THE YEAR
    2000
    
    HC41672   MFGPROG  :
    LOCAL FEEDRATES DEFINED IN 3D SIDE OPERATION ARE REVERSED BY OPPOSITE WITH
    TRACUT.
    
    HC41675   IGECAT   :
    IGECAT IS NOT ABLE TO PROCESS AN ENTITY 212 WHICH CONTAINS MORE THAN 130
    CHARACTERS IN ONE STRING.
    
    HC41713   SOLIDE   :
    After performing the synchronization with Check Link..., some additional models
    have been loaded into a SOLIDE sess
    
    HC41751   FD&T     :
    FD&T DIMENSIONS MISSING IN VIEWS AFTER AUXVIEW2 EXTRACTION
    
    HC41760   MFGPROG  :
    OPPOSITE HAND PROCESSING WITH TRACUT ORDER FAILS FOR A PO CONTAINING A
    SEQUENTIAL FLANK CONTOURING OPERATION.
    
    HC41847   SHM_AERO :
    CATDLA.ERROR MESSAGE WITH DRAWING EXTRA
    
    HC41862   MONITIX  :
    CATIA PERFO TRACE GIVING BAD NUMBERS FOR FILE EXIT
    
    HC41891   NCMILL   :
    WHEN CATNC IS USED WITH *APT3 OPTION, UNIT VECTOR IS NOT GENERATED WITH A
    MAGNITUDE EQUAL TO 1.
    
    HC41911   SOLIDE   :
    SOLIDE / UPDATE : changing from LOCAL to GLOBAL solid after solid/modify and
    solid/update leads to ABEND U709.
    
    HC41917   CDM      :
    Unable to load model from PSN to CATIA in multi-environment with
    CATCDMA.PSN.QUICK_EXPAND = YES
    
    HC41928   FILE     :
    CATIA CRASH WITH ABEND S11 WHEN SELECTING COLOR / CHANGE COLOR THIS PROBLEM IS
    SGI SPECIFIC
    
    HC41931   GIFDDN2  :
    GIFDDN2 takes longer time than GIFDDN for a long model list in USRENV.dcls.
    
    HC41969   EQUIP    :
    Bad performances of EQT Assembly instanciations
    
    HC41972   PIPSETUP :
    PIPESETUP/CATALOG/PIPE SPEC/GENERATE KILLS CATIA SESSION WHEN IMPORT SWITCH IS
    USED.
    
    HC41977   SHM_AERO :
    SHM_AERO.CANNOT CREATE TWO PLANE FLANGES.NEED A NEW ERROR MESSAGE .
    
    HC41980   AECPRIM  :
    ABENS S11 DURING AECPRIM CREATION WHEN PREVIEEW PANEL IS ACTIVE
    
    HC41993   TEXTD2   :
    TEXTD2/CREATE ATT lists all keywords (hundreds). Only ASSIGNed keywords (by
    ATTRIBUT/INFORM) should be listed.
    
    HC42028   SKIN     :
    SKIN / FEATURE / SKIN / SWEEP FAILS WITH PLANE AS REFERENCE - PLANE NOT
    COMPATIBLE WITH CTR CRV -
    
    HC42036   FITTING  :
    FITTING / SIMULATE : TRACES OF CURVES ARE NOT BE CREATED
    
    HC42067   GIRMAT   :
    GIRMAT does not recognize *CPT type elements.
    
    HC42091   SHM_AERO :
    SHM_AERO.Update error with joggle creation.
    
    HC42122   ANPHYSIC :
    ANPHYSIC LOAD COMBINE : availability of superposed imposed displ acements (if
    no or same local axis system is app
    
    HC42138   PSN      :
    SIZE OF PSN VOLUME BOX DISPLAYED IN CATIA NOT CONVERTED IN INCH WHEN ACTIVE
    MODEL IS IN MM
    
    HC42146   FITTING  :
    CREATION OF FITTING ROUTES TOO COMPLICATED
    
    HC42178   SHM_AERO :
    SHM_AERO.GENERAL RELIABILITY IMPROVEMENT
    
    HC42192   KEEP     :
    Selection remains selected after function KEEP / MERGE
    
    HC42220   SOLIDE   :
    SOLIDE : WRONG IDENTIFIER IN CHECK LINK PANEL FOR *SKD
    
    HC42221   FD&T     :
    FD&T : incorrect display of unilateral or bilateral profile tolerances vs
    standard.
    
    HC42225   INSTIX   :
    APAR for testing PTF build process in 420-2 level
    
    HC42246   SOLIDE   :
    SOLIDE + UPDATE fails under AIX only with NON ISOTOPOLOGICAL GEOMETRY
    
    HC42256   /NAV4D   :
    4DNAV : INTERFER WITH GROUPS IMPOSSIBLE
    
    HC42291   SOLIDE   :
    CATGEO routine wanted for Check Link operation in SOLIDE multimodel environment.
    
    HC42303   DXFCAT   :
    DIAMETER SYMBOL NOT TRANSLATED AFTER A DXFCAT PROCESS.
    
    HC42311   SOLIDE   :
    COLOR IS APPLIED ON SOLID SMOOTH EDGES AFTER MODIFYING THICKNESS
    
    HC42317   CATIGE   :
    AFTER LOOKBACK PROCESS CATIGE- IIF - IGECAT, SOMES FACES ELTS ARE SHIFTED .
    
    HC42386   GCWSMZ   :
    CATGEO GCWSMZ GIVES UNDERFLOW ERRORS IN BATCH MODE.
    
    HC42401   SOLIDE   :
    Update is required after selecting a fillet with SOLIDE MODIFY GEOMETRY PARM in
    a local solid when coming back to g
    
    HC42404   SHM_AERO :
    SHM_AERO.NO BKL IF MANUF PROCESS CHANGED HYDRO->BRAKEFORMED
    
    HC42414   GRAPHIC  :
    WRONG DISPLAY VALUE IN GRAPHIC/MODEGEN/CHOOSE/THKNESS
    
    HC42424   MFGPROG  :
    A final part thickness set to 0 mm in the frame file locks MAD and you get an
    Invalid Interaction
    
    HC42432   SKIN     :
    SKIN / FEATURE / SKIN / EXTRUDE using a vector coordinates leads to a contour
    extruded in the wrong direction.
    
    HC42437   FD&T     :
    ABEND S10 WHEN TRYING TO COPY DIMENS2 OR TEXTD2 TOLERANCE IN FD&T FUNCTION.
    
    HC42443   BEAM     :
    BEAM / EDIT / PROPERT / CURRENT leads to error message - COLLAPSED PROFILE -
    
    HC42454   CATFEA   :
    Problem when recuperating solution caracs in automatic Acquisition mode on
    elements caracs (CATFEA & GFISLV).
    
    HC42457   SHM_AERO :
    SHM_AERO.RETURN FLG KO IF EOP IS AN ELEMENT
    
    HC42461   SHM_AERO :
    SHM_AERO.ERROR MESSAGE DOES NOT USE USER NAMES IN FEATURES GRAPH .
    
    HC42469   SOLIDE   :
    IMPOSSIBLE TO OFFSET SKIN : CURVATURE RADIUS PROBLEM IS DETECTED
    
    HC42476   BENDPART :
    BENDPART PART DELETE DOESN T WORK, SUBFUNCTIONS ARE MISSING
    
    HC42483   /NAV4D   :
    4DNAV : SAVING A SCENE WITH GROUP DEFINED BY QUERY ATTRIBUTE LEADS TO COREDUMP.
    
    HC42485   SKIN     :
    IMPOSSIBLE TO CREATED INTERSECTION BETWEEN SKIN AND SURFACE
    
    HC42495   BENDPART :
    MODIFY BENDPART PART DEFINITION LEADS TO THE LOSS OF DIMENSIONS IN AUXVIEW2
    VIEW EVEN IF THE DIMENSION IS ASSOCIATI
    
    HC42506   SPCDR2   :
    Wrong result given with SPCDR2 / PROJECT / EXACT for a specific model.
    
    HC42507   MFGPROG  :
    PMA : Impossible to explode compound features
    
    HC42532   SHM_AERO :
    SHM_AERO.DEFINING CORNER RELIEF ON FLAT LEADS TO ERROR 704
    
    HC42535   DUCTWORK :
    Impossible to define a flange length at end of a mitered round elbow
    
    HC42550   SOLIDE   :
    Top rsur is not created after a SOLIDE OPERATN THICK on a cylindrical RSUR from
    a cylinder primitive.
    
    HC42556   SOLIDE   :
    PARAMETER ELEMENT IS NOT DISPLAYED ON FK SOLIDE / MODIFY
    
    HC42583   ADPEXTR  :
    GRAPHIC REPLACEMENT PARTIALLY PROCESSED AFTER VIEW EXTRACTION
    
    HC42592   GRAPHIC  :
    GRAPHIC/MOD GEN/CHOOSE/THKNESS LEDS WRONG DISPLAY VALUES ON AEC MM SITE
    
    HC42632   SOLIDE   :
    Trying to go in local solid in a SOLIDE branch fails with the error message
    INTERNAL ERROR.
    
    HC42642   CATDXF   :
    CATIA DXF LEVEL INDICATED IN THE TOP OF THE LOG FILE IS WRONG .
    
    HC42644   ST_FRAME :
    ST_FRAME/MODIFY/REFLECT HAS NO ACTION
    
    HC42648   SPTPLACE :
    ABEND ERROR 711 WHEN PLACING A SUPPORT.
    
    HC42649   CDP      :
    CDP Get Check-Out Infos on model gives NO DATA AVAILABLE when another graph is
    opened on a sub-assembly
    
    HC42660   CATCDMA  :
    CHECK-OUT IN CATCDMA DIFFERED FROM THE CHECK-OUT IN DATABASE FUNCTION OF CATIA .
    
    HC42682   AUXVIEW2 :
    AUXVIEW2 SECTION : APPLIED ROTATION AFTER UPDATE NOT KEPT WHEN SECTION CREATED
    WITH CUTTING PLANE DEFINED BY PLAN
    
    HC42713   SOLIDE   :
    SOLIDE UPDATE FAILS ON A UNION TRIM IN FORCE UPDATE : LIMIT CASE WHEREAS UPDATE
    BUTTON IN MANAGE WINDOW WORKS
    
    HC42721   ANSOLID  :
    ANSOLID COMPUTE : IN APPLICATION OF LOCAL SIZE, ONLY THE FIRST S ELECTED ENTITY
    IS CORRECTLY DISPLAYED ON MODEL A
    
    HC42735   FILE     :
    CHANGE VISUALIZATION MODE FROM NHR TO SHD CAUSES CPU LOOP
    
    HC42762   SKIN     :
    SKIN / MODIFY / COLOR LEADS TO ABEND S6
    
    HC42780   FILE     :
    VIEW / REFRAME ON A PLANE SKIN LEADS TO INFINITE ZOOM
    
    HC42797   SHM_AERO :
    SHM_AERO.ADD OPTION TO PREVENT 2DTEXTS FROM BEING WRITTEN
    
    HC42810   TEXTD2   :
    /QUICKTEXT : S0011 WHEN ENTERING MORE THAN 132 CHARACTER PER LINE
    
    HC42814   SHM_AERO :
    SHM_AERO.BTL DIFFERENT FROM FLANGE OML.
    
    HC42818   SHM_AERO :
    SHM_AERO.ONLY ONE CHILD FLANGE UPDATED AFTER CUTOUT
    
    HC42823   TEXTD2   :
    /Q QUICK TEXT CLOSE AFTER THE SECOND TIME LEADS TO ERROR 510 ABEND U510
    
    HC42847   SKIN     :
    SKIN / OPERATION / TRIM a surface by a plane using plane equati on --> SKIN AND
    CURVE CANNOT BE LNKED
    
    HC42857   PUBLISH  :
    PUBLISH : CORRECTIONS ON MANAGEMENT OF COLOR CGM
    
    HC42885   MFGPROG  :
    INCORRECT TOOLPATH DISPLAY IN STANDARD AND CONTACT DISPLAY MODE FOR GUIDED CUT
    3X MACHINING OPERATION.
    
    HC42886   AUXVIEW2 :
    AUXVIEW2+USE+VIEW+NEW SECTION VIEW EXTRACTED GEOMETRY DIFFERENT ACCORDING SOLM
    IS IN MASTER OR IN DETAIL WSP
    
    HC42894   MFGPROG  :
    WRONG DIRECTIONS FOR TOOL SIDE AND START VECTOR DISPLAYED DURING GUIDING
    SELECTION FOR 5X SIDE CURVE OPERATION.
    
    HC42901   MFGPROG  :
    UNABLE TO EDIT 3X ISOFAC MACHINING OPERATIONS CREATED ON 419 refresh 1 level.
    
    HC42916   AUXVIEW2 :
    AUXVIEW2 SECTION CUT CREATED IN AN UNEXPECTED CREATED SET - ASSO -CIATED TEXT
    FOR SECTCUT AND OTHER VIEWS ARE IN TH
    
    HC42940   SHM_AERO :
    SHM_AERO.STRANGE MESSAGE EVEN IF PART OK IN CONTROL WINDOW LIKE NO CHECKING
    AVAILABLE YET FOR THIS KIND OF FLANGE .
    
    HC42949   PIPSETUP :
    THE WALL THICKNESS IS WRONGLY COMPUTED BY GT0WTHK UIP IN CASE OF REDUCING PART.
    
    HC42964   SOLIDE   :
    A force update with SOLIDE UPDATE leads to an ABENDS0010 when computing a FROM
    TO prism.
    
    HC42966   E3INSTAL :
    E3INSTAL/TRANSFOR : 'ERASED ELEMENT' when transforming an ECP
    
    HC42968   CATDXF   :
    CATDXF - FAILS IF THE MODEL NAME CONTAINS A QUOTE OR DOUBLE QUOTE CHARACTERS .
    
    HC42980   ANSOLID  :
    FK ANSOLID / REPORTER TEXT IS NOT CLEAR TO READ IN JAPANESE ENVIRONMENT.
    
    HC42988   E3INSTAL :
    E3INSTAL/DELETE : ECPs are deleted when deletaion of BPPs is requested
    
    HC43007   /NAV4D   :
    4DNAV : GRID COLOR CHANGES WITH MODEL COLOR WHILE MOVING SECTION PLANE
    
    HC43035   MFGPROG  :
    DURING THE CREATION OF GLOBAL FLANK CONTOURING, THICKNESS ON START ELEMENT IS
    ACTIVE EVEN IF START MODE IS SET TO O
    
    HC43041   /NAV4D   :
    4DNAV : AUXILIARY AXIS USE FOR DENEB.
    
    HC43049   DETAIL3D :
    ABEND U104 WHEN SAVING CATIA MODEL AFTER YES DISPLAY IN DETAIL
    
    HC43053   SHM_AERO :
    SHM_AERO.PART GEO CHANGES DEPENDING ON SIDE OF WEB PLANE
    
    HC43056   SHM_AERO :
    SHM_AERO.FLG LENGTH BASED ON FASTENER SIZE WRONG AS ANNOUNCED
    
    HC43067   SHM_AERO :
    SHM_AERO.ANNOUNCED LENGTH CHANGES FROM CREATION TO MODIFICATION
    
    HC43075   CATCDMA  :
    CDP Get Check-Out Infos on model gives NO DATA AVAILABLE when another graph is
    opened on a sub-assembly
    
    HC43079   MFGPROG  :
    POLYLINE SELECTION MODE DOES NOT WORK.
    
    HC43083   FITTING  :
    N4D FITTING SIMULATION : SHUTTLE BEHAVES INCORRECTLY IN ROUTE / SEQUENCE WHEN
    ROUTE HAS 180 DEGREE ROTATION
    
    HC43087   SHM_AERO :
    SHM_AERO.FOLDED OK BUT FLATTENING KO AFTER ADDING A JOGGLE
    
    HC43091   SHM_AERO :
    SHM_AERO.ROUND FLG LENGTH BY FAST SIZE TO 2 DIGITS UPPER VALUE
    
    HC43099   FORMTOOL :
    FORMTOOL / RELIMIT / TRIM ALL fails with error message : ERASED ELEMENT - NO
    inaccessible.
    
    HC43111   CATSIM   :
    EVEN IF KEEPDIT IS NOT USED, THE DETAILS WORKSPACE ARE COPIED IN THE LIGHT
    MODEL.
    
    HC43161   DIMENS2  :
    DIMENS2 / CREATE / DISTANCE leads to incorrect dimension with a pipe.
    
    HC43179   SKIN     :
    SKIN / FEATURE / SKIN / OFFSET leads to ABEND S6.
    
    HC43190   LIMIT23D :
    LIMIT2 / SKIN causes an abnormal change of INDEX/DATA size after packing with
    ERASE / PACK (dependent model problem
    
    HC43195   SOLIDE   :
    SOLIDE / OPERATN / FILLET fillet is created but fillet surfaces are not clean.
    
    HC43198   MFGPROG  :
    INVALID SELECTION MESSAGE RETURNED WHEN SELECTING SOLID RSUR TO DEFINE PART
    SURFACE IN 3X ISOFAC MACHINING OPERATIO
    
    HC43210   IGECAT   :
    A DITTO ROTATION IS NOT TAKEN INTO ACCOUNT AFTER AN IGECAT PROCESS.
    
    HC43214   CATCDMA  :
    CSBREFZ SHOULD CALCULATE THE SPACEMAP AND MANAGE THE OVERALL VOLUME
    
    HC43219   SOLIDE   :
    GOING LOCAL ON A SOLID THEN DOING UPDATE IN EXTENDED MODEL CAUSES U709 ABEND
    WITH SPECIFIC INDEX AND DATA VALUES.
    
    HC43224   SHM_AERO :
    SHM_AERO.GSA-GENERATED SOLID IS A SKIN AFTER SOLID IS ERASED
    
    HC43229   FILE     :
    Model error 711 after the color of the copy of a V5 part is changed
    
    HC43231   SHM_AERO :
    SHM_AERO.FASTENER LOCATION IS WRONG ON FLAT PATTERN
    
    HC43236   SKIN     :
    SKIN / FEATURE / SKIN / OFFSET fails with message : SURFACE OFFSET FAILS.
    
    HC43237   CATDLA   :
    NUMBER OF HITS OF CATDLA DOES NOT WORK PROPERLY .
    
    HC43238   SOLIDE   :
    SOLIDE / MODIFY / OPERATN / DELETE : Msg STACK ERROR when selecting a
    specific branch.
    
    HC43242   COV_ENG  :
    support of multi-insert meshes in composite function.
    
    HC43243   FILE     :
    CATIA APPLI FILE HAS WIDE OPEN PERMISSIONS
    
    HC43257   EQUIP    :
    MECHANICAL PARTS ARE DELETED IN CASE OF RESPEC OPERATION
    
    HC43259   GSCPLS   :
    GSCPLS routine causes an ABEND S0011 when using an IUAPROC through the IUA
    function
    
    HC43282   REPORTER :
    REPORTER-CANNOT MOVE THE ATTRIBUTES WINDOW WHEN THE PALETT IS SET TO PERMANENT
    
    HC43344   EQUIP    :
    AFTER EQUIP/LAYOUT/MOVE/COPY OF EQUIPMENT THE MODEL IS CORRUPTED
    
    HC43368   ANELFINI :
    ELFINI : BATCH CATOPT : OPTIMIZATION WITH ASSEMBLY
    
    HC43374   SKIN     :
    SKIN / DUPLICATE of a template in passive gives ABENDS6.
    
    HC43375   SOLIDE   :
    SOLIDE / COMPLEX / SPLIT with a *SKD fails with error message : INVALID PATCH
    NUMBER.
    
    HC43383   SURF1    :
    SURF1 / CONNECT leads to NOT CONVERGING CALCULATION.
    
    HC43392   MFGPROG  :
    INVALID TOOLPATH IN CONTOURING PROFILE WITH START/END ELEMENTS
    
    HC43399   ANMANAGE :
    NASTRAN SOLVER : CREATION OF ELEMENT SLIDE
    
    HC43402   MFGPROG  :
    IMPOSSIBLE TO DEFINE A TOOL CHANGE POINT IN THE PART OPERATION
    
    HC43409   SOLIDE   :
    IMPOSSIBLE TO MAKE A FILLET ROLLING EDGE
    
    HC43411   ANMESH   :
    ANMESH ELEMENT ANALYSE : INCORRECT DISPLAY OF VALUES IN PANEL
    
    HC43414   CATCDMA  :
    ABENDS33 OF CATCDMA AFTER LOADING MODEL IN 4DNAV . THE PAGING SPACE IS NOT
    RELEASED.
    
    HC43427   SOLIDE   :
    SOLIDE / OPERATN / CHAMFER : FAILED WITH ERROR MESSAGE CHAMFER CANNOT BE
    CREATED ON LONG, NOT LARGE AND THIN
    
    HC43435   /NAV4D   :
    4DNAV : HOW TO RESET DEFAULT BEHAVIOUR OF STATUS BAR IN THE N4D FILE
    
    HC43436   /NAV4D   :
    4DNAV : RANDOM COREDUMP IN CLASH COMPUTATION FOR INTERFERENCE CHECKING
    
    HC43440   ANSOLID  :
    ANSOLID : PERFORMANCE IMPROVEMENTS IN APPLICATION OF CONTACT LOA DS ON SURFACE
    
    HC43447   SOLIDE   :
    SOLIDE OPERATN UNION in TRIM mode between 2 specific solids leads to the error
    message IMPOSSIBLE TRIM OPERATION.
    
    HC43458   SOLIDE   :
    SOLIDE CREATE CANONIC SWEEP with a SKD reference surface leads to CATIA session
    termination, without any error mess
    
    HC43465   FORMTOOL :
    FORMTOLL / RELIMIT / TRIM EL1 - Trimmimg a face by a curve leads to ABEND U104.
    
    HC43468   /NAV4D   :
    4DNAV : COREDUMP - RELOADING SCENES CONTAINING CATIA SESSIONS
    
    HC43475   CATPLOT  :
    ERROR CODE 16281 RUNNING CATPLOT FROM CDMA
    
    HC43486   SOLIDE   :
    IMPOSSIBLE CONNECT DEFINITION ON FK SOLIDE / FILLET
    
    HC43494   DUCTWORK :
    On SunOS, Abend S11 when defining a new rectangular elbow in DW_SETUP function
    
    HC43503   FILE     :
    CAPABILITY TO BUILD A CATIA SESSION WITHOUT LOADING THE MODELS
    
    HC43508   SOLIDE   :
    FILLET fails with error message < impossible fillet relimitation >
    
    HC43511   CDM      :
    4DNAV does not load CDMA models using CDM-remote with CATCDM.SELECT_JOIN=FALSE
    
    HC43512   SOLIDE   :
    SOLIDE / OPERATN / FILLET / FACEFACE : INTERNAL ERROR. FILLET IS DISPLAYED ON
    SCREEN BUT NOT IN CSG TREE (PART ED
    
    HC43518   DIMENS2  :
    Stacked system dimension is not created correctly with DIMENS2 / CREATE /
    DISTANCE.
    
    HC43530   SOLIDE   :
    SOLIDE/MODIFY/PARM : Fillet radius modification impossible in smart mode for
    old created fillet.
    
    HC43531   CATCDMA  :
    CAN NOT UPDATE PART ATTRIBUTES WHEN INSERTING IT IN CDMA .
    
    HC43543   CATCDMA  :
    INTEROPERABILITY BETWEEN VPM AND CDMA FOR SECURITY .
    
    HC43548   /NAV4D   :
    4DNAV : IMPOSSIBLE TO SAVE AN ANIMATION IN A SCENE ON SUN OS.
    
    HC43550   NAV4D    :
    INTEROPERABILITY BETWEEN VPM AND 4DNAV FOR SECURITY .
    
    HC43563   DIMENS2  :
    Wrong extension line is modified with DIMENS2 / MODIFY / EXT LINE / FUNNEL.
    
    HC43564   SOLIDE   :
    FILLET LOCAL REORDER FAILED ON SOLIDE / OPERATN / FILLET / EDGE
    
    HC43572   SOLIDE   :
    SOLIDE / CHANGE LINKS of an offset created with a *SKD leads to ABEND S6.
    
    HC43581   ANVISU   :
    ANVISU : VISU OPTION FOR CATSPM
    
    HC43584   SOLIDE   :
    SOLIDE / DRAFT STANDARD MODE FAILS WITH ILLEGAL SET ERROR MESSAGE
    
    HC43589   GFMNOD   :
    GFMNOD should keep the associativity of FEM type elements.
    
    HC43593   SKIN     :
    3999 ERROR(S) IN SOLID SOFTWARE RETURNED WHEN WRITING MODEL WITH SKD IN VPM
    DATABASE
    
    HC43606   PLOT     :
    PLOT : WRONG VALUE FOR PS PARAMETER IN CREATED HPGL2 PLOT OUTPUT
    
    HC43609   AUXVIEW2 :
    AUXVIEW2 BAD ACCURACY REPRESENTATION - PROBLEM WITH HLR ON A SPECIFIC SKIN -
    REPRESENTATION OK IF HIDDEN LINES NOT
    
    HC43635   AECSHAP  :
    Cannot assign to an angle parameter a fixed value in degrees
    
    HC43650   PRINT    :
    PRINT SCREEN SWITCH DOESN'T WORK WITH AIX_MOTIF_INPUT SHELL VARIABLE
    
    HC43657   AUXVIEW2 :
    ERROR(S) IN MODEL UPDATE WITH *GRN GEOMETRY FROM DETAIL WSP AT AUXVIEW2 SECTION
    VIEW - *GRN SHOULD NOT BE EXTRACTED
    
    HC43660   DIMENS2  :
    Dimension is created incorrectly with DIMENS2/QUICKDIM between circle axis
    created with AUXVIEW2.
    
    HC43688   SW_DESGN :
    TX24 : When copying a Planar part with Profile Collars, the orientation of the
    collars is reversed on the copied
    
    HC43701   FILE     :
    MAJOR DISPLAY PROBLEM WITH HLR
    
    HC43702   PATHWAYS :
    PATHWAYS+ROUTING DOES NOT HIGHLIGHT IN PASSIVE MODE
    
    HC43706   MERGE    :
    ABEND U714 when trying to load the MERGE function, /cln loops when trying to
    process the model in ANALYZE mode.
    
    HC43707   TEXTD2   :
    Specific characters are not correctly managed in /QUITXT
    
    HC43715   SKIN     :
    SKIN FUNCTION : DETECTION OF ORIENTATION MODIFICATION DURING UPDATES
    
    HC43720   KINEMUSE :
    the regression has been caused by APAR HC43535 in AIX on V420-R1
    
    HC43724   MFGPROG  :
    CANNOT APPLY FRAME FILES FOR COMPOUND FEATURES IN MFGPROG FUNCTION.
    
    HC43726   MFGPROG  :
    SOME PLANES ARE NOT MACHINED BY MAD ROUGH PROCESS, SO THAT MATERIAL IS LEFT ON
    THE PART.
    
    HC43734   SKIN     :
    SKIN / EXTRACT DOES NOT RESPECT THE GRAPHIC STANDARD FOR FACES
    
    HC43739   DIMENS2  :
    Problem of performance when loading DIMENS2
    
    HC43741   SKIN     :
    SKIN / FEATURE / SKIN / LOFT leads to ABEND U722.
    
    HC43755   CATEXP   :
    CATEXP FAILS WITH AN U0725 ABEND WHEN EXPORTING AN INTERNALIZED LIBRARY
    
    HC43772   CSB      :
    MODELS + MODIFY + REPLACE DOES NOT WORK AFTER A CATIA CSB SESSION.
    
    HC43780   STUDIO   :
    STUDIO : VISUAL STUDIO STYLE AND RENDERING ERRORS
    
    HC43791   SOLIDE   :
    SOLIDE / OPERATN / UNION TRIM FAILS WITH IMPOSSIBLE TRIM OPEREATION ERROR
    MESSAGE
    
    HC43803   CATCDMA  :
    CATCDMA INSERT KO IF CSB FUNCTION ACTIVE IN CATIA.
    
    HC43808   FILE     :
    Incorrect file conversion to SDNF format : placement orientation of section is
    not respected
    
    HC43817   E3INSTAL :
    E3INSTAL + COMPUTE YIELDS INCORRECT RESULTS (basic compute)
    
    HC43819   SOLIDE   :
    UNABLE TO WORK IN SMART SOLID
    
    HC43823   GIERAS   :
    GIERAS doesn't work on SOLIDE on which PARAMETRISATION has been used
    
    HC43829   /NAV4D   :
    FITTING SIMULATION DOES NOT SAVE COMPLETE SEQUENCE
    
    HC43833   /NAV4D   :
    4DNAV : LOOP WHEN READING A CATIA SESSION IN WHICH A MODEL IS NO LONGER
    AVAILABLE.
    
    HC43836   SKIN     :
    SKIN / FEATURE / CURVE / CIRCLE / TGT BETWEEN TWO PARALLEL LINES RESULT IN
    ERROR : IMPOSSIBLE GEOMETRY
    
    HC43837   SKIN     :
    SKIN / MODIFY / VIEW RESULTS IN ERROR   INVALID ELEMENT TYPE
    
    HC43853   AUXVIEW2 :
    AUXVIEW2 SECTION VIEW / CUT DOES NOT GENERATE GEOMETRY FROM DITTO WHEN A LAYER
    FILTER HAS BEEN APPLIED TO MODEL
    
    HC43864   SKIN     :
    SKIN / normal plane orientation problem.
    
    HC43872   CATCDMA  :
    CDP loops when saving changes on released assembly structures
    
    HC43880   SOLIDE   :
    SOLIDE / OPERATN / THICK : THICKNESS DIRECTION IS NOT NORMAL TO RSUR.
    
    HC43891   BENDPART :
    QUALITIES REMAINS SELECTED EVEN IF SWITCHS HAVE BEEN DESELECTED PREVIOUSLY.
    
    HC43901   AUXVIEW2 :
    INSUFFICIENT MODEL SIZE / MODEL FULL PROBLEM AND ALSO IMPOSSIBLE OPERATION
    ERROR WHEN SETTING RECOMMENDED VALUES FO
    
    HC43905   DXFCAT   :
    CHARACTER SIZE IS CHANGED AFTER A LOOP BACK CATDXF-DXFCAT.
    
    HC43913   CATDXF   :
    CHARACTERS POSITION IS CHANGED DURING LOOP BACK CATDXF-DXFCAT.
    
    HC43915   PIPSETUP :
    Problem on HP machine when reading a customer catalog created on AIX
    
    HC43922   BEAM     :
    BEAM / EDIT / SWAP leads to ERROR IS ARGUMENT LIST
    
    HC43926   SOLIDE   :
    SHELL PRIMITIVE BECOMES UNRESOLVED AFTER UPDATE
    
    HC43937   GFMNOD   :
    ASSOCIATIVITY IS KEPT WITH SOME CATGEO ROUTINES
    
    HC43938   STUDIO   :
    STUDIO : TEXTURE 2D OF PASSIVE MODELS ARE LOST AFTER A RENDERING
    
    HC43940   DETAILDR :
    DETAIL / EXPLODE on a ditto with dimension : dimension disapears when it is a
    cumulated dimension (SYSD type elt).
    
    HC43952   PATHWAYS :
    ABLE TO DELETE *PCP ELEMENTS LINKED TO OTHER MODELS
    
    HC43962   /NAV4D   :
    4DNAV : PROBLEMS AND COREDUMP WITH THE ORPHAN OPTION IN CACHE SETTINGS PANEL.
    
    HC43972   FORMTOOL :
    FORMTOOL / FILLET / SKINSKIN / TRIM ALL RESULTS IN ABEND U0104
    
    HC43976   AUXVIEW2 :
    SETTING MAX_PERMANENT INDEX AND DATA IN DECLARATIVE FILES MAKES SECTION CUT
    UPDATE ABENDS U737 - OK WITH DEFAULT VA
    
    HC43980   LIMIT23D :
    ABEND U104 IN LIMIT2 / SKIN / CREATE
    
    HC43988   TEXTD2   :
    TEXTD2 : color problems between GRAPHIC and TEXTD2 function for texts
    
    HC43997   PIPE_DES :
    INCOMPATIBLE PIPE SPEC even if no schedule is defined. Should allow sch 160 to
    show compatible with 3000 rating if
    
    HC44007   SOLIDE   :
    SOLIDE UPDATE => LOCAL REORDER FAILLED WITH SIMPLE CONSTANT RADIUS FILLET.
    
    HC44011   PATHWAYS :
    EXCESSIVE TIME TO INVOKE PATHWAY+NETWORK+MODIFY LINKS
    
    HC44015   CATST1   :
    CATST1 UTILITY FAILS IN RC=1 FROM A SPECIFIC CATIA MODEL.
    
    HC44016   PATHWAYS :
    NO ERROR MSG WHEN ROUTING ENET WITH UNLINKED ECP
    
    HC44033   PATHWAYS :
    NSTS HAVE NO ASSOCIATED LINK BACK TO PATHWAY
    
    HC44047   SOLIDE   :
    SOLIDE UPDATE => INTERRUPTED FILLET WITH CONSTANT RADIUS FILLET LYING ON TWO
    VARIABLE FILLETS
    
    HC44061   /NAV4D   :
    MODEL NAME COLUMN DISAPPEARS AFTER SWITCHING TO ORPHAN THEN BACK TO REFERENCED
    
    HC44065   NAV4D    :
    CAT/SAFEWORK : COREDUMP AT PRINT PREVIEW OF WINDOW USING GXT1000 OR GXT3000
    ADAPTERS.
    
    HC44069   CURVE1   :
    CURVE1 + PROJECT AND GSCPCS DO NOT PROJECT CORRECTLY
    
    HC44070   SOLIDE   :
    SOLIDE OPERATN SUBTRACT between 2 solids leads to an ABENDS0006.
    
    HC44078   PATHWAYS :
    PATHWAYS MOTIF PANEL HAS RANDOM DEFAULT SEGCODE VALUE
    
    HC44084   BEAM     :
    BEAM : junctions tangency problem.
    
    HC44085   SOLIDE   :
    VARIABLE FILLET LYING ON TWO VARIABLE FILLETS FILLET CAN NOT BE UPDATED :
    INTERRUPTED FILLET .
    
    HC44088   AECMNGT  :
    AECFRAME/EDIT/ATTRIBUTES LEADS WRONG VALUATION ON MSEL AEC ELEME NTS
    
    HC44089   FILE     :
    Enhancement to be able to read a CATpart from 502 level in a V4 session
    
    HC44092   CATCDMA  :
    THE INFORMATION OF THE NUMBER OF SELECTED LINES IN THE DBA WINDOW IS NO MORE
    GIVEN
    
    HC44112   PSN      :
    WHEN USING THE CSB FILTER IN PSN THE RIGHT QUERY IS NOT DISPLAYED IN THE EDIT
    FILTER WINDOW
    
    HC44115   SOLIDE   :
    GOING INTO LOCAL SOLID IN PART EDITOR LEADS TO INTERNAL ERROR
    
    HC44119   SW_DESGN :
    GENERAL RELIABILITY ENHANCEMENTS ON 421 SHD PRODUCT (COMPLEMENT TO HC41640)
    
    HC44131   BEAM     :
    BEAM / EDIT / SECTION / INSERT fails.
    
    HC44133   CATCDMA  :
    Interoperability between VPM and CDMA for security. Complementary correction
    for HC43543/HC44539/HC44540/HC44541
    
    HC44137   SOLIDE   :
    SOLIDE / UPDATE : IMPOSSIBLE CONNECT DEFINITION FOR FILLET LYING ON THREE
    VARIABLE FILLETS
    
    HC44140   SKIN     :
    SKIN : MULTI MODEL IMPACT INFORMATION IS WRONG
    
    HC44145   BEAM     :
    SKIN : BAD MANAGEMENT OF BEAM PARENT DELETE IMPACTS
    
    HC44162   /NAV4D   :
    In VIEW / CYLINDRIC VIEW the model turns also at second click of mouse button 2
    
    HC44167   PLOT     :
    PLOT : PS VALUE IS INCORRECTLY IN HPGL2 DATA
    
    HC44175   FILE     :
    PERFORMANCE PROBLEM WITH SHADING FOR FACES
    
    HC44178   SOLIDE   :
    ABEND S11 OR CPU LOOP WITH REVOLUTION FEATURE AND OPERAND SUBSTRACT IN A SOLIDE
    
    HC44185   FILE     :
    READING A MODEL STORED IN HLR VISU MODE LEADS TO AN S11 ABEND THIS PROBLEM IS
    SGI SPECIFIC
    
    HC44190   SKIN     :
    SKIN : EDITING A SWEEP MODIFIES GROUPING
    
    HC44198   SOLIDE   :
    SOLIDE : FEATURE BRANCH - PERFORMANCES ARE NOT GOOD TO IDENTIFY AND COLLAPSE
    CSG_TREE
    
    HC44203   /NAV4D   :
    4DNAV : LAST MODEL IS NOT EXPORT TO CATIA.
    
    HC44207   PSN      :
    VOLUME IN PSN IS WRONG. THE XMIN COORDINATE IS ALWAYS WRONG.
    
    HC44217   CURVE1   :
    CURVE1 / REFLECT / ISO NORM / CYLINDER CAUSES AN ENDLESS LOOP
    
    HC44226   SOLIDE   :
    CPU LOOP OCCURS WHEN READING A MODEL STORED IN SHD VISU MODE
    
    HC44232   CATBACK  :
    CATBACK FAILS WITH A CPU LOOP WHEN PROCESSING SPECIFIC SOLIDE MODELS
    
    HC44238   /NAV4D   :
    4DNAV : CATIA SESSION CAN NO LONGER BE LOADED INTO 4DNAV.
    
    HC44243   ISO_EXTR :
    ISO EXTR doesn't round off metric dimensions ie : 22.5mm appears as 22mm AND
    connected elements don't display conn
    
    HC44251   SOLIDE   :
    SOLIDE - SKIN LINKS FOR VPM USE FOR MULTIPLE LINKS TYPE
    
    HC44258   SOLIDM   :
    CATCLN Some *POL Solid have lost their resolved form and become unusable.
    
    HC44271   CATSIM   :
    SPECIFIC CATSIMED ELEMENT CREATES INVALID GRN ELEMENTS
    
    HC44276   SOLIDE   :
    SKIN : ERROR MESSAGE 'UNKNOWN ELEMENT' WHEN SELECTING A SKIN
    
    HC44285   PLOT     :
    PLOT : HPGL2/RTL AND C907 SAMPLES DON T RESPECT LINE THICKNESS
    
    HC44291   ANMESH   :
    ANMESH OCTREE : ERROR IN CONNECTING MESH
    
    HC44304   E3INSTAL :
    Bad result when using delete with multi-sel on BPP
    
    HC44306   SOLIDE   :
    UPDATE OF AN INACTIVATED IMPORTED SOLID DOES NOT WORK
    
    HC44309   PRJ_SHIP :
    Cannot create Principal Axis Definition in a new AEC Ship site at 420-1 level
    
    HC44313   MFGPROG  :
    AFTER TRYING TO REPLAY A LOCAL REWORK PROCESS IN MFGPROG, IT IS IMPOSSIBLE TO
    EDIT ANY MACHINING OPERATIONS.
    
    HC44317   SKIN     :
    SKIN : wrong informations are diplayedabout children and impact
    
    HC44325   MFGPROG  :
    MAD CURVES MACHINING/SIDES DEFAULT VALUE IS INCORRECT
    
    HC44327   STUDIO   :
    STUDIO : UNEXPECTED RESULT WITH STUDIO/RENDER. THE TEXTUR3D MAPPED WITH
    SUB-ELEMENT OPTION
    
    HC44338   GIRSGS   :
    GIRSGS : The plane boundary argument cannot be read after a plane creation.
    
    HC44350   BEAM     :
    BEAM / EDIT / SWAP : Changing the spine gives error in BEAM and SKIN functions.
    
    HC44359   PLOT     :
    PRINT : CATPrinterPath need to be customized as the UNIX PATH VARIABLE
    
    HC44372   FILE     :
    Meaningless message Dynamic storage cannot be allocated when reading a
    CATPart if the V5 environment declaration
    
    HC44377   PLOT     :
    PLOT : INACTIVATED ELEMENTS WITH SOLID/OPERATION/INACTIVE ARE PLOTTED
    
    HC44381   STUDIO   :
    STUDIO : SKIN ELEMENTS DISPLAYED IN IMAGE VIEWER THOUGH HIDDEN WITH VIEW /
    LAYER / FILTER INTERACTIVE DISPLAY OK
    
    HC44394   NAV4D    :
    CDMA PANEL GOES INTO COREDUMP WHEN CLOSING THE PSN AND AFTER MAKING AN EDIT +
    IDENTIFYIN 4DNAV
    
    HC44403   MFGPROG  :
    REPLACE TOOL IN THE FRAME FILE BY A TOOL DEFINED IN THE TDB LEADS TO ERROR
    MESSAGE DURING THE CREATION OF PROCESS.
    
    HC44407   SOLIDE   :
    SOL -> SKD LINKS VISIBILITY MODIFICATION FOR A VPM USE
    
    HC44418   ANMANAGE :
    ANMANAGE WITH NASTRAN SOLVER : ABEND U104 WHEN IMPORTING BULKDAT A WITH RBE3
    
    HC44433   SPCDRW   :
    LOOP DURING SPCDRW
    
    HC44442   SKIN     :
    SKIN / FEATURE / SKIN / SWEEP : Boundaries problem.
    
    HC44455   NCMILL   :
    WRONG TOOLPATH GENERATED FOR CONTACT/SUR-ISO OPERATION WITH PART AND CHECK
    SURFACES.
    
    HC44464   AUXVIEW2 :
    ENHANCEMENT REQUESTED IN AUXVIEW2 QUICKDRW TO ENABLE FRONT VIEW TO BE CREATED
    SELECTING / KEYING IN 2 SPACE LINES
    
    HC44468   CDM      :
    SERVICES FOR THE EXPORTATION OF P_STREAM
    
    HC44474   STUDIO   :
    STUDIO : FABRIC WRAPPING OPTION IS NOT ACTIVE
    
    HC44483   PLOT     :
    IMPOSSIBLE TO MODIFY THE MODEL NAME IN THE WINDOW
    
    HC44487   AUXVIEW2 :
    AFTER AN AUXVIEW2 UPDATE NO GEOMETRY IS SHOWN
    
    HC44491   SKIN     :
    SKIN FUNCTION : INCONSISTENCY PROBLEMS.
    
    HC44504   CATN4D   :
    N4D : STEREO IS NOT FUNCTIONING PROPERLY WITH A GXT800P GRAPHICS CARD
    
    HC44507   MFGPROG  :
    Cumulative error in PPB
    
    HC44546   ANMESH   :
    ANMESH CREATE SURFACE FRONTAL : ABEND U100 WHILE ASSIGNING A HOL E DEFINITION
    
    HC44564   SOLIDE   :
    SUBSTRACT TRIM LEADS TO ERROR MESSAGE < IMPOSSIBLE TRIM OPERATION >
    
    HC44567   SOLIDE   :
    SOLIDE / EXTRACT / EDGECRV : GIVES ElEMENT TYPE IS INVALID IF THE EDGE OF A
    SOLID IN HRD OR SHD VISU MODE IS SELE
    
    HC44568   E3INSTAL :
    Error message 'erased element' when creating a BPP
    
    HC44573   CATPLOT  :
    PLOT : MSG .INSUFFICIENT VIRTUAL MEMORY. BUT RC=0
    
    HC44577   E3INSTAL :
    'Invalid variable' message when cancelling a GBN selection
    
    HC44578   ST1CAT   :
    ST1CAT UTILITY FAILS IN ABENDS11 FROM A SPECIFIC STEP FILE .
    
    HC44584   CATAIX   :
    THE STRING OPTION DOES NOT WORK WHEN RUNNING CATAIX ON A SEQUENTIAL FILE
    
    HC44601   FILE     :
    CAPABILITY TO OPEN A MODEL WITH NEW UUID ON ALL ELEMENTS THROUGH A READ AS
    ITEM
    
    HC44604   S.T.L.   :
    STL CREATE gives error message :  IDENTIFIER NOT DEFINED
    
    HC44609   AUXVIEW2 :
    AUXVIEW2 DOESN'T GENERATE CLIPPING REPRESENTATION AT DETAIL VIEW CREATION WHEN
    WORKING ON BENDPART SPACE PARTS - OK
    
    HC44612   CATCDMA  :
    ABEND S006 AND UNEXPECTED ERROR MESSAGE IN CATCDMA AFTER MODELS + MODIFY +
    REPLACE IN CATIA .
    
    HC44632   AUXVIEW2 :
    CREATING A SECTION VIEW WITH *SUR ELEMENTS GENERATES A MATHEMATICAL BLOCK ERROR
    
    HC44639   CATWEB   :
    POOR PERFORMANCE OF CATWEB SERVER FOR X-WINDOW SWAPPING.
    
    HC44642   NCMILL   :
    PARAMETER OF FEEDRATE IS NOT TAKEN INTO ACCOUNT ANYMORE IN MULTIPOCKET
    OPERATION IF IT IS RENAMED.
    
    HC44643   CATCDMA  :
    CDP MakeNewRevision method fails in abend
    
    HC44648   SKIN     :
    SKIN / FEATURE / POINT / PROJECT : Projection of a point on a curve leads to
    PROJECTION DOES NOT EXIST.
    
    HC44661   SOLIDE   :
    SOLIDE / OPERATN / UNION IN LOCAL SOLID RESULT TO INVISIBLE PRIMITIVE WHEN
    GOING BACK TO GLOBAL SOLID.
    
    HC44664   SW_DESGN :
    SUPERSED HC41640 WHICH LEADS ERROR DURING RIF CREATION VIA CATINST INSTALLATION
    SOFTWARE
    
    HC44679   SKIN     :
    SKIN / FEATURE / CURVE / PROJECT leads to NO PROJECTION
    
    HC44683   DETAILDR :
    CPU loop using /cln on specific model + abend U768 when loading DETAIL function.
    
    HC44689   PSN      :
    ZONE FILTER NOT KEPT WHEN CREATED IN CSB FILTER WITH FILTER BY VOLUME .
    
    HC44701   /NAV4D   :
    Creation of a user-exit launched at save catia in order to be able to store
    fitting data.
    
    HC44707   CATCLN   :
    If 2 details have the same name CLN1, cleaner detects error 146 but does not
    correct it
    
    HC44708   SHM_AERO :
    SHM_AERO.CHARACTERISTIC ELEM NOT VISIBLE ON CURRENT LAYER
    
    HC44715   PSN      :
    INSTANTIATED MODELS FROM CATIA TO N4D ARE NOT LOADED CORRECTLY
    
    HC44720   SOLIDE   :
    SOLIDE UPDATE IMPROVEMENT IN CASE OF MULTIPLE SOLIDE-SKIN LINKS
    
    HC44732   CATSIM   :
    CATSIM UTILITY RETURNS ERRORS WHEN USING DATABASE KEYS IN THE INPUT FILE
    
    HC44736   SHM_AERO :
    SHM_AERO.2ND OML NOT LONG ENOUGH ON UNFOLDED VIEW .
    
    HC44743   CATCDMA  :
    SPACEMAP IS NOT COMPUTED WHEN ELEMENTS ARE OUT OF VOLUME DEFINED BY
    CATDMA.CSB.VOLUME.MAX
    
    HC44744   DATABASE :
    ABEND U104 OR COREDUMP WHEN COMPUTING SPACEMAP ON SPECIFIC MODEL AND WHEN THE
    PARAMETER CATCDMA.CSB_DITTO_CSBENC=TR
    
    HC44756   MFGPROG  :
    IN LOCAL_CAVITY_ROUGHING OPERATION, WRONG COMPUTATION OF THE FIRST MACHINING
    POINT.
    
    HC44760   COUPLER  :
    CADCAT - The CADANSI spec is only correct for the first dimension transferred.
    
    HC44767   CATITF   :
    BAD PERFORMANCES INHIBIT CATITF USAGE
    
    HC44768   COV_ENG  :
    COV_ENG / ANALYZE / CORE SAMPLE gives wrong results
    
    HC44786   COV_ENG  :
    COV_ENG + ANALYZE + NUMERIC give error messages
    
    HC44807   GJBCOM   :
    GJBCOM issues fllowing error message : 17510 - NO WIRES ROUTED - BNL NOT
    UPDATED .
    
    HC44814   SOLIDE   :
    CATSOE integration of new option deleting the inertia calculus stored in a
    model.
    
    HC44821   /NAV4D   :
    4DNAV : READ A SESSION WITH CDMA MODELS SAVED AS  ALL DATA  GIVES A U0001 ABEND
    
    HC44826   MFGPROG  :
    CATMFG FAILURE WITH CODE 8 ON 3X GUIDED CUTTING MACHINING OPERATION.
    
    HC44835   SOLIDE   :
    SOLIDE / UPDATE FOR A SOLID WHICH CONTAINS INACTIVATED IMPORT : THE PART EDITOR
    BACKGROUND REMAINS GREEN.
    
    HC44853   SOLIDE   :
    SOLIDE TRANSFOR SCALING of a specific solid leads to GENERATED FACE WOULD BE
    INVALID, after performing a fillet.
    
    HC44859   SOLIDE   :
    SOLIDE UPDATE leads to a CPU LOOP when computing a fillet.
    
    HC44865   ISO_EXTR :
    ELBOW RADIUS ON ISOMETRIC IS 1000 TIME BIGGER ON MM AEC SITE
    
    HC44868   KINEMUSE :
    EXPORT TO CATIA FROM N4D DOES'T WORK WHEN FIRST MODELS ARE POSITIONED IN CATIA
    
    HC44872   SKIN     :
    SKIN / FEATURE / CURVE / PROJECT is impossible on irix : IMPOSSIBLE GEOMETRY.
    
    HC44875   PSN      :
    PSN WRONG MOUSE BEHAVIOUR AFTER CTRL+B
    
    HC44886   AUXVIEW2 :
    AUXVIEW2 /THREAD : THREAD IN SECTION VIEW AND HIDDEN LINES IN PROJ VIEW ARE
    WRONGLY REPRESENTED AND DEPENDS ON DIAM
    
    HC44891   DATABASE :
    COMMIT/ROLLBACK WITH THE DB2 DATABASE DOESN'T WORK WHEN CATIA IS OPENED FROM PSN
    
    HC44895   BEAM     :
    BEAM / EDIT / SESSION, graph session, expand leads to ABEND S6
    
    HC44897   SHM_AERO :
    SHM_AERO.EXAGGERATED FILE SIZE FOR GSA DEFINITION
    
    HC44899   ADPEXTR  :
    Vertical AEC Tags are moved after each update
    
    HC44904   STUDIO   :
    STUDIO : TEXTURES NOT CORRECTLY MAPPED
    
    HC44906   BEAM     :
    BEAM / EDIT / SESSION, session graph, clicking on HELP gives error message :
    Help File CATIASkinMMLHelp1 not found
    
    HC44918   STUDIO   :
    STUDIO : CATDISP PROBLEMS WITH HOME DIRECTORY MOUNTED ONTO FILESYTEM WHERE VXFS
    HAS BEEN SELECTED
    
    HC44925   SHM_AERO :
    SHM_AERO.WARNING SHOULD BE GIVEN WHEN BREAKING CURVED FLG
    
    HC44934   BENDPART :
    BENDPART .AFTER BEND CREATION THE WALLS ARE NOT VISUALISED ANYMORE.
    
    HC44939   NCVERIF  :
    In NC VERIF, while selecting 'Filter'and then 'Layer''All',the cutter display
    is mirrored from the correct position
    
    HC44941   MFGPROG  :
    FEEDS AND SPEEDS COMPUTATION IN THE MACHINING PROCESSES APPLICATION ACCORDING
    THE ROUGH AND FINISH CHARACTERISTICS
    
    HC44942   MFGPROG  :
    CATMFG FAILURE DURING GENERATION OF TOOLPATH FOR Z_LEVEL MACHINING OPERATION :
    IT WORKED ON 419R1.
    
    HC44957   SKETCHER :
    ABEND DURING EVALUATION ON CURVE & AVAILABILITY OF G8MDAT CATGEO ROUTINE
    
    HC44960   BENDPART :
    BENDPART.HOLES ARE COMING IN AS HIDDEN IN UNFOLDED VIEW
    
    HC44972   SOLIDE   :
    ABEND S11 DURING SOLID SUBSTRACTION (VIZUALISATION PROBLEM)
    
    HC44974   KINEMUSE :
    DITTO TESSELATED INTO CUBE FOR COLLISION DETECTION
    
    HC44979   CATCDMA  :
    ABEND S11 IN CATCSBAD
    
    HC44986   CONV_DES :
    RACEWAY PARTS CAN T BE PLACED - INTERNAL OR EXTERNAL CONFLICT
    
    HC44993   CATCLN   :
    CATCLN DETECTS ERROR 130 - INVALID EDGE - BUT NO ACTION CAN BE PERFORMED
    (IMPOSSIBLE TO CLEAN THE MODEL)
    
    HC44997   SOLIDE   :
    SOLIDE TRANFOR UNSPEC truncates transformation names previously stored with
    TRANSFOR STORE at 16 characters.
    
    HC45006   FILE     :
    Error model 725 / abend U725 when saving a prjmodel including user elements
    with textd2/dimens2 elements
    
    HC45015   ANMANAGE :
    ANMANAGE EXPORT WITH NASTRAN SOLVER : RESTRAINT DEFINED WITH ONL Y AXIS SYSTEM
    AND NO DOF ARE NOT EXPORTED IN GRI
    
    HC45017   SKIN     :
    APAR opened in order to flag PE PTFs related to APARs HC42359 , HC42361 ,
    HC41636 , HC41363 and deliver corrections
    
    HC45028   SOLIDE   :
    ABENDS11 ON FK SOLIDE / UPDATE WITH MIRRORED BRANCH
    
    HC45039   SOLIDE   :
    IMPOSSIBLE FILLET RELIMITATION ON SOLIDE / UPDATE
    
    HC45053   DIMENS2  :
    INTERNAL SOFTWARE ERROR RECEIVED WHEN ENTERING DIMENS2 OR TEXTD2 FUNCTION -
    MERGE CURES BUT NOT A GOOD SOLUTION
    
    HC45063   SOLIDE   :
    REROUTE OPERATION IS FAILED
    
    HC45070   SOLIDE   :
    ALL FILLETS ARE DELETED AFTER DELETING UNRESOLVED FILLET
    
    HC45074   SOLIDE   :
    NODE CANNOT BE REORDERED ON REORDERING TRIM BRANCH
    
    HC45078   E3MANAGE :
    E3MANAGE+MANAGE+IDENTIFR+DEV LIST LEADS TO AN I/O ERROR WHEN ATTEMPTING TO
    ACCESS RJ1RDLI - E3LCABLE / MENTOR CONTE
    
    HC45092   CATIGE   :
    CATIGE FAILS IN RC=8 IS *SPL PARAMETRIC OPTION IS SPECIFIED.
    
    HC45093   SOLIDE   :
    2 FSURS ARE MERGED AUTOMATICALLY AFTER UPDATE
    
    HC45094   LIMIT1   :
    LIMIT1 / RELIMIT : MISSING PROJECT FILE INFORMATION AFTER RELIMIT OF AN ARC
    
    HC45096   E3INSTAL :
    WHEN USING E3INSTAL/CREATE/BNL SURF AND SELECTING A PART NUMBER THE SELECTED
    PART NUMBER SHOULD BE HIGHLIGHTED
    
    HC45113   SOLIDE   :
    THE RESULT OF FK SOLIDE / UNION IS DIFFERENT BETWEEN STD AND TRIM MODE
    
    HC45121   CATDXF   :
    CATDXF UTILITY FAILS IN ABENDS11 FROM A SPECIFIC CATIA MODEL.
    
    HC45130   /NAV4D   :
    4DNAV : PTF TEST ON 4DNAV
    
    HC45143   SOLIDE   :
    SOLIDE / CREATE / COMPLEX / OFFSET CREATES INCORRECT SPHERE FROM SURFACE IN SHD
    MODE.
    
    HC45145   FD&T     :
    FD&T : incorrect display of datum target tolerance vs standard.
    
    HC45152   SOLIDE   :
    SOME TRIM SPECIFICATION LOST ON UPDATE. Edit button is not available
    
    HC45156   SOLIDE   :
    SOLIDE / OPERATN / UNION TRIM WITH TRIM ASSISTANT LEADS TO ABEND S11 ON AIX
    MACHINE AND IF SOLID IS IN SHD VISU MOD
    
    HC45176   SKETCHER :
    SKETCHER : MSG NON EVALUABLE PRIMITIVE WHEN LIVING THE SKETCHER THE REVOLUTION
    AXIS OF THE SOLID IS TANGENT TO TH
    
    HC45179   FD&T     :
    FD&T / COPY : ABEND S10 WHEN TRYING TO COPY DIMENS2 OR TEXTD2 TOLERANCE INTO 3D
    (FD&T).
    
    HC45185   ADPEXTR  :
    ADPEXTR update of a view containing isolated structural Opening leads to Abend
    U104 when filter is applied
    
    HC45189   SOLIDE   :
    REDGE CANNOT BE EXTRACTED ON EDITING VARIABLE FILLET
    
    HC45193   SOLIDE   :
    FSUR DOES NOT APPEARE IN THE BREP ON EDITING ROLLING EDG FILLET
    
    HC45198   MFGPROG  :
    MFGPROG FUNCTION SEEMS TO GO IN CPU LOOP WHEN TRYING TO REPLAY SEQUENTIAL FLANK
    CONTOURING MO CREATED ON 419R1.
    
    HC45200   /NAV4D   :
    4DNAV : ACCESS TO THE VIEWPOINT IN INTERFER FUNCTION.
    
    HC45205   /NAV4D   :
    CONFERENCING : ENABLE THE USE OF A UNIQUE COMMUNICATION PORT NUMBER.
    
    HC45214   SKIN     :
    SKIN / FILLET / EDGE : Incorrect geometry created
    
    HC45228   TUBING   :
    IT IS POSSIBLE TO LINK DEFERENT LOGICAL LINES. A CONECTION IS BUILT BETWEEN
    BOTH LINES WITHOUT A WARNING
    
    HC45232   FD&T     :
    ERROR IN FD&T SOFTWARE ON CREATING C1 TYPE CHAMFER TOLERANCE
    
    HC45233   MODEL    :
    MODEL/MODIFY/REPLACE/ROTATE DOESN'T WORK CORRECTLY IN CATIA WHEN MODELS COME
    FROM PSN
    
    HC45244   MODELS   :
    MODEL included in several WORKAREAS is closed from all workareas even if
    REMOVE FROM ALL WORKAREA option is not s
    
    HC45250   BEAM     :
    BEAM / APPLY / JUNCTION leads to error message LINK NUMBER DOES NOT EXIST when
    a beam parent is missing in the sess
    
    HC45256   TUBING   :
    CHANGE SUB FUNCTION IS IMPOSSIBLE
    
    HC45258   SPTCREAT :
    SPTCREAT AND PRJMODEL CONCEPT DOES NOT WORK TOGETHER (ERROR MESSAGE MISSING
    RETURNED).
    
    HC45262   MERGE    :
    Model error 700 when merging a model where a text has been erased from a draw
    detail
    
    HC45263   CATCLN   :
    NO MESSAGE AVAILABLE OR INTERNAL ERROR IN ROUTINE CLNMON / CLNPTI WHEN CLEANING
    A MODEL WITH SKD SKINS
    
    HC45276   PSN      :
    WHEN THE PSN WINDOW IS OPENED IN FULLSCREEN MODE, IT CAN NO MORE BE REDUCED TO
    MORE THAN HALF SCREEN
    
    HC45287   FD&T     :
    FD&T + MODIFY + VALUE - UNABLE TO MULTI-SELECT FOR TOLERANCE VALUE MODIFICATION
    
    HC45297   KINEMUSE :
    Problem with the calculation of collisions on Inch-models.
    
    HC45299   SOLIDE   :
    SOLIDE / UPDATE : MSG -SOME TRIM SPECIFICATION LOST- when replaying trim
    operation defined on former levels of CA
    
    HC45306   AUXVIEW2 :
    AUXVIEW2 CAUSES CALLOUT TEXT TO SCALE WHEN MANAGING CALLOUT BY MAKING A MOVE
    CALLOUT - SPECIFIC TO SOME GRAPHISM (A
    
    HC45311   IGECAT   :
    IGECAT DOES NOT CONVERT SOME TRIMMED SURFACES
    
    HC45321   MFGPROG  :
    PPB OUTPUTS WRONG SIGN
    
    HC45337   ANMESH   :
    ANMESH MESH CREATE SURFACE 4 EDGES ON A CYLINDER GIVES MESSAGE : INVALID REDGE
    FOR THE SECOND HALF OF THE CYLINDE
    
    HC45356   SOLIDE   :
    SOLIDE / OPERATN / UNION IN A DETAIL WORKSPACE LEADS TO AN ABENDS11 IF VISU
    MODE IS SET TO SHDAN HP-UX ONLY
    
    HC45370   MFGPROG  :
    WHEN APPLYING AUTOCOMPLETE TO A PO THE MACHINE ENVELOPE PART POSITIONING IS
    AFFECTED
    
    HC45378   CATMOD   :
    PB CATMOD, approximation de surface
    
    HC45420   ANVISU   :
    ANVISU : VISU OPTION FOR CATSPM ( FOR PROVIDING PTF 421 DUE TO PE FLAG ON PTF
    421 FOR APAR HC43581 )
    
    HC45467   MFGPROG  :
    AT EDITION STEP IN ASSEMBLIES TAB PAGE, ASSEMBLY IS SYSTEMATICALLY DUPLICATED
    WHEN RENUMBERED.
    
    HC45503   MFGPROG  :
    IN LOCAL_CAVITY_ROUGHING, CUTTER PLUNGES DOWN INTO UNCUT MATERIAL.
    
    HC45510   CDP      :
    CREATE/SAVE, UPDATE, DELETE ICONS CANNOT BE DISABLED IN CDP WHEN CLICKING PART,
    MODEL OR TEMPLATE IN THE OBJECT MEN
    
    HC45517   MFGPROG  :
    PROBLEMS IN NCMILL/CONTACT/FACE-ISOPARAM AND SUR-ISOPARAM OPERATIONS.
    
    HC45525   MFGPROG  :
    CATMFG UTILITY FAILS WITH A RETURNED CODE 8 FOR MOs CREATED FROM REWORK PROCESS.
    
    HC45530   SURF2    :
    Message d'erreur ` la giniration d'une surface.
    
    HC45553   BENDPART :
    BENDPART / ELEMENT / MODIFY / SINGLE DOES NOT WORK PROPERLY
    
    HC45558   SOLIDE   :
    IMPOSSIBLE FILLET RELIMITATION ON FK SOLIDE / OPERATN / FILLET
    
    HC45572   CATFONT  :
    No way to convert texts into Unicode
    
    HC45587   FD&T     :
    THE DIMENSION VALUE FOR FILLET IS DIFERENT FROM KEYED IN RADIUS FILLET
    
    HC45591   PLOT     :
    PLOT : IN PLOT/WINDOW ,THE OVLY OPTION TO NO DOES NOT WORK.
    
    HC45604   CATPLOT  :
    PLOT : TIFF FILES GENERATED USING CATPLOT HAVE WRONG DATE VALUE. 1900 INSTEAD
    OF 2000 IN THE TIFF TAGS . Y2K PROBL
    
    HC45605   SW_DESGN :
    Correction of Abend U999, regression of APAR HC44119
    
    HC45611   AUXVIEW2 :
    AUXVIEW2 DOES NOT EXTRACT FD&T DIMENSIONS (FACE SKIN)
    
    HC45619   ST_FRAME :
    Longitudinal Split of Linear Member is not allowed
    
    HC45620   MFGPROG  :
    PROBLEM IN RESIZE OF FEATURES
    
    HC45623   CATCLN   :
    Cleaner errors 88 and 156 are incorrectly managed
    
    HC45627   SOLIDE   :
    GICBRX : When ICREAT=2, a PATH is created although this mode is meant to read
    an existing PATH.
    
    HC45631   CATSTP   :
    STEP FILE CREATED FROM A SPECIFIC CATIA MODEL CAN NOT BE TRANSLATED BACK
    SUCCESSFULLY BY STPCAT.
    
    HC45635   SHM_AERO :
    JOGGLE NOT COMPUTED IF DEPTH LESS THAN .032
    
    HC45647   SKIN     :
    SKIN / EDIT and modify a feature that shares a value box with another feature
    --> the common box is duplicated.
    
    HC45652   GIRMCO   :
    GIRMCO : Impossible to read the modal color associated to *MASTER geometric set.
    
    HC45667   FILE     :
    Impossible to save a V4 session that includes a V5 CATPart opened as passive
    
    HC45676   STUDIO   :
    STUDIO : NEW SKINS CANNOT BE MAPPED WITH TEXTURE2D
    
    HC45682   BEAM     :
    BEAM / EDIT / PROPERT / CURRENT : after modifying properties and updating, the
    beam is shown as non updated in BE
    
    HC45683   CATWEB   :
    CATWEB - 2D LOCAL VIEWER - MODEL IS TRUNCATED -
    
    HC45695   IDENTIFY :
    IDENTIFY / RENUMBER : *SKD elements are renamed into *ITM type elements (*SKI
    type stay as *SKI).
    
    HC45697   TEXTD2   :
    QUICKTEXT - CONFLICT BETWEEN ADD_LEADER AND MOVE TEXT ITEMS IN QUICKTXT PANEL -
    LEADER IS CREATED INSTEAD OF MOVING
    
    HC45703   /NAV4D   :
    4DNAV : COLOR OF SKIN ELEMENTS NOT DISPLAYED IN 4DNAV WINDOW
    
    HC45711   FILE     :
    Visualizing or re-visualizing a V5 CATPart in a V4 session issues a message
    --> VIOVLS; nb FR de part a visualiser
    
    HC45715   SOLIDE   :
    EXITING SOLID FUNCTION WHEN A LOCAL SOLID IS DISPLAYED DUPLICATE THE LOCAL SOLID
    
    HC45716   FORMTOOL :
    FORMTOOL : IMPOSSIBLE CREATION OF SURFACE.
    
    HC45725   KINEMAT  :
    IMPOSSIBLE TO REPLAY AN KINEMAT CREATED WITH A GEOMETRIC LAW IN 4DNAV
    
    HC45728   KINEMAT  :
    KINEMAT : PSN PROBLEM USING LARGE MODELS FROM A DATABASE
    
    HC45733   KINEMUSE :
    KINEMUSE : NO GENERATION OF TRACE IN MULTIMODEL KINEMATIC
    
    HC45745   PIPSETUP :
    THE WALL THICKNESS IS WRONGLY COMPUTED BY GT0WTHK UIP (SUPERSED HC42949 WHICH
    IS IN ERROR)
    
    HC45765   CATIGE   :
    CATIGE FAILED IN RC=8 DURING THE PROCESS OF A SPECIFIC ELEMENT.
    
    HC45769   ANMANAGE :
    S011 ABENDS WITH ANSYS 5.2 SOLVER IN ANMANAGE EXPORT WHEN NO RES TRAINT SET IS
    DEFINED
    
    HC45773   LIMIT23D :
    SCALING : IMPROVEMENT OF THE ERROR DIAGNOSIS
    
    HC45780   SOLIDE   :
    INVALID ADDRESS ON REPAIR OPERATION
    
    HC45785   CDM      :
    CATCDMA ABEND S006 WHEN CLOSING PSN GRAPH WITH CAPTURE GRAPH WINDOW .
    
    HC45806   FD&T     :
    FD&T DIMENSION LINES ARE NOT ORIENTED IN THEIR VIEW PLANE BUT IN DEFAULT
    DIRECTION.
    
    HC45810   SW_DESGN :
    RELIABILITY ON SHD AND ESPECIALLY ON PART/COPY/ADVANCED
    
    HC45814   AECPRIM  :
    INVALID ELEMENT TYPE WHEN WIRE LINE PRIMITIVE IS MODIFIED
    
    HC45827   CURVE1   :
    CURVE1 / PROJECT LEADS TO ABEND S11 WHEN PROJECTING A CURVE ON A SPECIFIC
    SURFACE
    
    HC45837   STUDIO   :
    STUDIO : NEED TO KILL AUTO RAY PROCESS WHEN THE MASTER RAYMAST PROCESS HAS BEEN
    KILLED .
    
    HC45840   CATAIX   :
    IN A DBCS EUC-KR CATIA SESSION IMPOSSIBLE TO WRITE IN EBDCIC-DS-HGL CODE PAGE
    MODELS WITH ENGINEERING SYMBOLS
    
    HC45844   STUDIO   :
    STUDIO : RENDERING A SESSION THAT CONTAINS A CATPART WILL ABEND
    
    HC45846   AECPRIM  :
    IMPOSSIBLE TO MANAGE ANGLE CUT BETWWEN PRIMITIVES ON AEC SITE IN MM.
    
    HC45850   ASSEMBLY :
    FILE / OPEN IN ASSEMBLY LEADS TO CORE DUMP
    
    HC45854   CATCLN   :
    Some cleaner errors 88 are erroneously issued
    
    HC45855   COUPLER  :
    CADCAT - TEXT ON BALOON WAS ROTATED AFTER COUPLER
    
    HC45863   SOLIDE   :
    draft fails with error message < impossible operation >
    
    HC45869   BEAM     :
    BEAM / APPLY OF A PARTICULAR SECTION RESULTS IN S06 ABEND
    
    HC45871   SOLIDE   :
    SOLIDE + CREATE + IMPORT fails with error message < error message missing >
    
    HC45874   BEAM     :
    BEAM / APPLY OF A SECTION DOES NOT RESPECT THE SECTION PLANE
    
    HC45878   SOLIDE   :
    FORCED UPDATE CAUSES /CLN ERRORS (CAT 1)
    
    HC45898   AUXVIEW2 :
    BENDPART.FLAT LENGTH DIM CHANGES WHEN CHANGE OF BEND ANGLE
    
    HC45916   ANPHYSIC :
    ANPHYSIC READF11 OPTION TRANSFERS VALUES INCORRECTLY
    
    HC45920   CATMOD   :
    WITH CATMOD AFTER A TEXT/EXPLODE OPERATION, THE VIEW SCALE IS APPLIED TO THE
    TEXT BELONGING TO THIS VIEW.
    
    HC45929   BEAM     :
    SKIN / UPDATE RESULTS IN ERROR :   IMPOSSIBLE BEAM UPDATE
    
    HC45946   AUXVIEW2 :
    AUXVIEW2 UPDATE ERROR WITH FOLLOWING MESSAGE : ERROR IN MODEL UPDATE
    
    HC45955   SPCDR2   :
    /CLN ERR88 AFTER SPCDR2/PROJECT/EXACT
    
    HC45966   FD&T     :
    ERROR IN FD&T SOFTWARE ON CREATING ANY KIND OF CHAMFER TOLERANCE
    
    HC45981   FITTING  :
    FITTING : POSITION PROBLEM WHEN USING A SHUTTLE WHICH HAS BEEN TRANSFORMED
    (ROTATE) WITH MODELS FK
    
    HC45982   BENDPART :
    BENDPART.MISSING LATCH AFTER BENDPART/FOLDING
    
    HC45993   RASTER   :
    RASTER : TIFF FILE NOT DISPLAYED IN RASTER/IMPORT .
    
    HC45997   MFGPROG  :
    Impossible to insert Machining Operation in specific model : INVALID ADDRESS
    message is returned.
    
    HC46023   ANALYSIS :
    ANALYSIS / RELATIVE : SMALLEST DISTANCE : THE ANALYZED DISTANCES ARE NOT THE
    SHORTEST AS WANTED
    
    HC46039   SW_DESGN :
    IN THE DIALOG : NO WAY TO SELECT LIMIT FOR FREE EDGE CREATION INVALID PART
    DEFENITION
    
    HC46040   MFGDIES  :
    MFGDIES hangs after selecting options, guides or tools of Local Guided Cutting
    operation created from frame.
    
    HC46048   FORMTOOL :
    FORMTOOL : FILLET PROBLEM
    
    HC46051   DATABASE :
    WITH THE CDM REMOTE THE GDROID SEEMS TO CONVERT THE COID AND COMPID
    
    HC46052   SW_DESGN :
    APPLICATION OBJECT DOES NOT EXIST DURING FEATURE CREATION ON PHYSICAL PLATE
    
    HC46053   INSTIX   :
    CATINST : DURING REFRESH2 INSTALLATION, LANGUAGE,COUNTRY AND CODEPAGE WERE NOT
    LISTED
    
    HC46064   KEEP     :
    ENDLESS LOOP after using the function KEEP and trying to change to function
    ERASE.
    
    HC46068   SW_DESGN :
    GENERAL RELIABILITY ON CATGEN UTILITY FOR SHD
    
    HC46072   MFGPROG  :
    Abend S6 while creating a PO with a machine whose strategy of tool change is
    FIX_PL.
    
    HC46081   BENDPART :
    BENDPART .BEND CREATED ALONG ENTIRE PART INSTEAD OF JUST INNER TAB .
    
    HC46104   PIPSETUP :
    PROBLEM ASSIGNING SIZES AND END STYLES
    
    HC46112   PIPSETUP :
    PROBLEM OF INCORRECT ACCESS OF THE PIPE DIMENSION TABLE
    
    HC46117   CATNC    :
    Unused INDEX statements generate additional undesired PPRINT statements and
    some motions are not output correctly.
    
    HC46120   PLOT     :
    PLOT : THE ELEMENT WINDOWPANEL UNDER PLOT/LAYOUT APPEARS APPEARS, BUT IS FROZEN
    AND CANNOT BE MOVED
    
    HC46125   /NAV4D   :
    THE NAME OF THE PART ARE NOT RETRIEVED IN 4DNAV WHEN THE MODELS COME FROM VPM
    
    HC46130   ANMESH   :
    /link command gives abend S0010 on HP operating system
    
    HC46137   SOLIDE   :
    SOLIDE / UPDATE FAILS WITH ABENDS11
    
    HC46155   FILE     :
    SOME FACES DISAPPEAR IN SHADING VISU MODE ON SGI ONLY
    
    HC46170   AUXVIEW2 :
    AUXVIEW2 / UPDATE ON A SPECIFIC VIEW LEADS TO ABEND S11 AFTER STEP 8 WHILE
    CHECKING DIMENSIONS NOT UPDATABLE TO BLI
    
    HC46180   SOLIDE   :
    < interrupted fillet > on SOLIDE + OPERATN + FILLET
    
    HC46193   TUBING   :
    ABEND U999 WHEN USING TUINSTAL. CATSYMB04 : Module RA0G2MEM cannot be loaded.
    
    HC46222   DIMENS2  :
    DUAL DIMENS2 DIM WITH EUDT MCF SCRIPT CHANGED IN AN INVALID ANNOTATION - THE
    DIMENSION IS LOST
    
    HC46230   CATCDMA  :
    VALUATION OF NON-DECLARED PARAMETER CATCDMA RELATION
    
    HC46251   SOLIDE   :
    It is not possible to modify a feature if solid is not updated
    
    HC46252   SKIN     :
    SKIN / FEATURE / SKIN / SWEEP / ANGLE or LIMIT : created sweeps are shorter
    than the supported surface (long enou
    
    HC46256   ROBUSE   :
    ROBUSE : ROBOT CANNOT BE MOVED CORRECTLY
    
    HC46270   KINEMUSE :
    KINEMUSE : UNEXPECTED AXIS ARE CREATED
    
    HC46291   SOLIDE   :
    SOLIDE / UPDATE FAILS WITH IMPOSSIBLE GEOMETRY ERROR MESSAGE
    
    HC46300   PSN      :
    MIX OF CHARACTERS DOES NOT WORK IF MIXED (CAPITAL AND SMALL LETTERS) PARTS OR
    MODELS ARE NOT FOUND
    
    HC46306   PSN      :
    ABEND WHEN CLOSING PROPERTY WINDOW IN PSN UNDER AIX ONLY
    
    HC46315   CATCLN   :
    Abend U704 / mdoel error 704 when cleaning a model for errors 104 when the
    corrupt entity is not part of the curren
    
    HC46317   CATN4D   :
    PIPES ELEMENTS ARE NOT CORRECTLY VIZUALISED : SOME PIPES SEEM TO BE DISPLAYED
    AS OPEN (JUST ONE HALF SIDE)
    
    HC46326   SOLIDE   :
    Multisel capability in /GENUUID command.
    
    HC46330   CATCLN   :
    On a specific model, cleaner reports persisting errors 104 (these errors did
    not exist at 420-1 level)
    
    HC46340   SOLIDE   :
    After using YES : SWAP DIAMETER capability of SOLIDE MODIFY GEOMETRY PARM on a
    sphere, the visualized radius value
    
    HC46346   SOLIDE   :
    A SPECIFIC CHAMFER CANNOT BE CREATED IN L1,A1 MODE BUT IT CAN BE CREATED IN
    L1,L2 MODE.
    
    HC46347   ANELFINI :
    ANELFINI / MECHANIC / STATIC / GAUSS LEADS TO ABENDS011
    
    HC46349   SOLIDE   :
    AFTER TRIM SPECIFICATION IS LOST, THERE IS NO ERROR MESSAGE OR WARNING WHEN
    UPDATING THE SOLIDE PART.
    
    HC46359   MFGPROG  :
    HANG IN MFGPROG AFTER SELECTING LIMITS ELEMENTS DURING THE CREATION OF A
    WIREFRAME FEATURE.
    
    HC46366   SOLIDE   :
    Preparation for multisel capability in /GENUUID command.
    
    HC46378   /NAV4D   :
    4DNAV : THE STEREOSCOPY OPTION IS NOT WELL MARKED IN THE VIEW MENU WITH THE
    SQUARE IN FRONT OF IT.
    
    HC46382   /NAV4D   :
    Interoperability CATIA 420-1 with PTF4 VPM1.1
    
    HC46396   SOLIDE   :
    Preparation for multisel capability in /GENUUID command.
    
    HC46403   /NAV4D   :
    N4D : CORE DUMP IN CATN4D WHEN IT RUNS IN MULTI PROCESSING
    
    HC46412   PSN      :
    IDENTICAL DOCUMENTS ARE NOT VISIBLE IN THE PSN WHEN USING DEPTH EXPAND LIMIT :
    MANUAL
    
    HC46413   SOLIDE   :
    IMPOSSIBLE OPERATION ON FK SOLIDE+ DRAFT
    
    HC46416   PATCH    :
    FK PATCH / FILL CREATES WRONG PATCH specific IBM 260 DUO CPU
    
    HC46426   STPCAT   :
    AFTER A LOOP BACK TEST CATSTP/STPCAT AND INVALID FACE IS DETECTED BY STPCAT
    UTILITY.
    
    HC46429   DATABASE :
    UNABLE TO RE-STORE REVISIONED MODELS IN CDMA
    
    HC46430   ANVISU   :
    CLIPPING PLANE KO IN CATSPM .
    
    HC46446   REPORTER :
    If USE OF LINE SEPARATOR is set to NONE, the last line is missing (bottom
    separator line)
    
    HC46448   COUPLER  :
    CATCAD - NOSHOW THE BOUNDARIES OF AREAFILLS, WHEN TRANSFERRING A PATTERN FROM
    CATIA TO CADAM AREAFILL
    
    HC46451   ANMESH   :
    PROGRAM ERROR IN OCTREE MESHER : IN ELEMENT COMPUTATION STEP, SE VERE ERROR IN
    OCOGVFP
    
    HC46461   ANMESH   :
    PROGRAM ERROR IN OCTREE VOLUME
    
    HC46475   PSN      :
    ERROR MESSAGE APPEARED WHEN CATIA ICON IS SELECTED IN PSN
    
    HC46487   E3INSTAL :
    INTERNAL ERROR IN E3INSTAL/FOLLOW WHEN SELECTING CYLINDER SURFACES IN A
    SEQUENCE OF SURFACES.
    
    HC46496   IGECAT   :
    DURING AN IGECAT PROCESS THE ENTITY COLOR 314 ARE NOT HANDLED CORRECTLY.
    
    HC46506   SOLIDE   :
    Mutisel Nodes icon and Break contextual menu item of SOLIDE PART EDITOR does
    not work.
    
    HC46516   SOLIDE   :
    < a small collision has been ignored > is displayed during SOLIDE + UPDATE
    
    HC46517   TRANSFOR :
    TRANSFOR / APPLY / DUPLICATE / ELEMENT / STANDARD FAILS AND THE ERROR MESSAGE
    DEGENETATE ELEMENT DISPLAYS
    
    HC46526   SKIN     :
    ABEND U104 DURING UPDATE USING SKIN FUNCTION
    
    HC46536   E3MANAGE :
    ABENDS0010 IN E3MANAGE FUNCTION WHEN MODELS (419 ONES) CONTAINING BUNDLES ARE
    USED. NEW 420 MODELS DO NOT CRASH
    
    HC46544   CATCDMA  :
    WHEN THE NAME OF THE ENV CONTAINS AN UNDERSCORE, CDMA FAILS WITH
    CATDBCONNECTION TABLE NOT FOUND ERROR 1403
    
    HC46547   ASSEMBLY :
    ASSEMBLY : CONTEXTUAL MENU / CATIA / SHOW ASSEMBLY : THIS ACTION TAKES A VERY
    LONG TIME
    
    HC46553   /NAV4D   :
    4DNAV : INCH INSTANCE POSITION WRONG WITH A SAVED VRML.wrl
    
    HC46555   ANMESH   :
    ANMESH : IMPROVEMENTS IN OCTREE AND MAPPED MESHERS
    
    HC46558   SOLIDE   :
    SOLIDE / TRANSFOR / SCALING : ABEND S11 after a PRIMSOL extract ENSOR ISTSIM
    ISCAHOP YTELF5 SOTRF2 SOTDPX YTRANS
    
    HC46573   FD&T     :
    UNABLE TO CREATE A TEXT OR FLAG ON A SPACE DETAIL
    
    HC46578   ANMESH   :
    ANMESH SURFACE 4EDGES : discretization automatically detected is not correct
    
    HC46587   ANSEMBLY :
    ANSEMBLY : ABEND S11 IN COMPUTING COUPLED ANALYSIS
    
    HC46595   POINT3D  :
    POINT / PROJECT : USING GRN ELEMENTS LEADS TO ELEMENTTYPE IS INVALID ERROR
    MESSAGE
    
    HC46601   ANMESH   :
    ANMESH 4EDGES : ERROR IN TREATMENT OF CAPTURE TOLERANCE VALUES
    
    HC46603   FILE     :
    FILE / SAVE SESSION AS... displays the list of MODEL directories instead of the
    list of SESSION directories.
    
    HC46611   /NAV4D   :
    4DNAV : COREDUMP WHEN READING A SCENE IN WHICH A GROUP BY EXCLUSION HAS BEEN
    SAVED.
    
    HC46618   /NAV4D   :
    4DNAV : SET COLOR FOR CDM MODELS NOT POSSIBLE
    
    HC46622   COUPLER  :
    CATCAD - RADIUS DIMENSIONS WITH NO-SHOWN VALUES ARE TRANFERRED WITH DIMENSION
    LINES EXTENDED OUTSIDE THE DRAWING AR
    
    HC46632   SKIN     :
    SKIN / EDIT an OFFSET PLANE does show any offset direction - cannot apply a
    modification.
    
    HC46643   FILE     :
    DITTO CREATED AT 418R2 CATIA LEVEL ARE PARTIALLY SHADED AT 420R1 UNDER HP-UX
    MACHINE.
    
    HC46654   SOLIDE   :
    SOLIDE / OPERATN / SHELL : USER IS NOT PROMPT TO REENTER NEW THIKNESS VALUES IF
    THEY WERE INVALID.
    
    HC46662   SHM_AERO :
    SHM_AERO.SEPARATING MODELS FOR GSA WITH ASSOCIATIVITY BETWEEN 3D AND FLAT PART
    DRAWING IN MULTI-MODEL .
    
    HC46674   BENDPART :
    BENDPART.SHEETMETAL NOT ALL ELEMENTS ARE REMOVED
    
    HC46681   ANVISU   :
    ANVISU DISPLAY STATIC gives abend S11 on image with shading = su rface
    
    HC46703   /NAV4D   :
    CATN4D : CORE DUMP IN MULTI-PROCESSING MODE UNDER AIX
    
    HC46717   SOLIDE   :
    SOLIDE / OPERATN / SPLIT LEADS TO ABEND S10
    
    HC46718   /NAV4D   :
    4DNAV SECTIONNING : SAVED SECTION VIEWER DOES NOT APPERA IN THE RIGHT COLUMS OF
    THE SAVE PANEL AFTER SAVE OPERATI
    
    HC46719   CATCDMA  :
    CDMA DENEB INTEROPERABILITY
    
    HC46730   DETAILDR :
    DETAIL / EXPLODE : impossible to explode a Ditto. Catia loops.
    
    HC46732   LIMIT23D :
    LIMIT2 / SKIN / CREATE leads to U104 Abend on AIX
    
    HC46742   GCWCCV   :
    GCWCCV : ABEND 711 when using this routine if the routine GIWSET is active.
    
    HC46743   SOLIDE   :
    SOLIDE + OPERATN + FILLET + EDGE fails with error message < interrupted fillet >
    
    HC46760   SOLIDE   :
    CANNOT CREATE SOLIDE OPERATN DRAFT USING ADD FSURS OPTION FOR NEUTRAL ELEMENTS
    : IT LEADS TO IMPOSSIBLE OPERATION.
    
    HC46766   SOLIDE   :
    SOLIDE OPERATN FILLET EDGE leads to a CPU LOOP trying to create a specific
    fillet.
    
    HC46774   SOLIDE   :
    Thickness becomes unresolved when it should be computed
    
    HC46802   IGECAT   :
    IGECAT FAILS IN ABENDS11 DURING THE PROCESS OF A DIAMETER DIMENSION .
    
    HC46810   P&ID     :
    INCIDENT I118 : USER NAME IN DMADM.IN
    
    HC46812   SOLIDE   :
    SOLIDE / MODIFY / GEOMETRY / PARM : NO MODIFICATION OCCURS WHEN USING THE
    MEASURE BUTTON FOR A TRANSLATION.
    
    HC46825   CATCDMA  :
    ABEND S0006 IN PSN USING CAPTURE GRAPH
    
    HC46828   DETAILDR :
    DETAIL / MODIFY / SCALE on Ditto gives wrong results.
    
    HC46830   SOLIDE   :
    DELETE BRANCH IN PART EDITOR LEADS TO AN ABEND S6
    
    HC46855   SOLIDE   :
    UNABLE TO PUT A THICKNESS ON A REVOLUTION ABOUT AN AXIS NORMAL TO A CURVED
    ELEMENT OF A CONTOUR
    
    HC46868   KINEMUSE :
    KINEMUSE / OUTPUT / COLLISION LEADS TO ABEND S006
    
    HC46872   DIMENS2  :
    DIMENS2 / QUICKDIM leads to different dimension values according to the order
    of selection.
    
    HC46888   DXFCAT   :
    CATDXF.IMPORT.CATIA_START_MODEL PARAMETER IS NOT HANDLED CORRECLTY VIA
    CATUTIL/UTILITY .
    
    HC46892   NCMILL   :
    IN CONTACT/FACISOPARAM OPERATION, TOOL JUMPS OVER CHECK PLANE DURING THE
    APPROACH MACRO.
    
    HC46896   IGECAT   :
    ABEND U725 IN IGECAT UTILITY WHEN PRJMODEL IS SET TO TRUE.
    
    HC46900   FD&T     :
    THE PAGE-UP KEY ON KEYBOARD DOES NOT PRODUCE ANYTHING WITHIN THE FD&T TEXT
    CREATION WINDOW
    
    HC46904   NCMILL   :
    DOUBLE POINT COMING FROM ORIENTATION MODIFICATION OF TOOL AXIS IS NOT GENERATED
    ANYMORE.
    
    HC46912   BENDPART :
    BENDPART ELEMENT CREATE WALL CUT FEATURE BENDPART - IT S NOT POSSIBLE TO CREATE
    ANY CHAMFER EXCEPT 45
    
    HC46916   ERASE    :
    Cleaner errors 116 after lines on which a dimension system is built are erased
    
    HC46920   PIPSETUP :
    PIPING SYMBOL WITHOUT PARAMETERS DOES NOT GENERATE, ERROR STACK DOES NOT EXIST
    IS RECEIVED.
    
    HC46932   E3INSTAL :
    COMPUTE RESULTS PANEL DOES NOT APPEAR.
    
    HC46943   MERGE    :
    MERGE.SELECT.SET.SPECIFIC displays an empty line for a model containing 2
    AUXVIEW2 views
    
    HC46948   PRJ_SHIP :
    PRJ_SHP/PROJECT/REFERENCE PLANES : CHANGE THE ORIENTATION OF PLANS IN THE
    SHARED MODEL.
    
    HC46950   PLOT     :
    PLOT / DATABASE FAILS WITH MESSAGE OBJECT NOT FOUND IN DATABASE
    
    HC46955   PSN      :
    COMMIT/ROLLBACK WITH THE DB2 DATABASE DOES NOT WORK WITH /LINKS IN A CATIA
    SESSION OPENED FROM PSN
    
    HC46962   PSN      :
    NO RESULT VISIBLE WHEN SELECTING SIMPLIFY IN THE CONTEXTUAL MENU
    
    HC46983   SOLIDE   :
    SOLIDE / MODIFY / GEOMETRY / PARM : REROUTE BUTTON IS DISPLAYED WHERE AS THE
    PART EDITOR DOES NOT INDICATE UNRESOL
    
    HC46987   CURVE1   :
    CURVE1 / INTERSEC : TO HIT NO WITH MULTI-SELECTION DOES NOT WORK
    
    HC46991   /NAV4D   :
    4DNAV : SKD ELEMENTS NOT RECOGNIZE AS ATTRIBUTES BY THE MB3 MENU OPTION. 4DNAV
    SERVER THEN REINITIALIZES AND REST
    
    HC46995   /NAV4D   :
    4DNAV : POINT OF VIEW LOST IN CATIA WHEN MODELS ARE EXPORTING FROM 4DNAV INTO
    CATIA IN INCH SESSION UNIT.
    
    HC46999   E3INSTAL :
    E3INSTAL / COMPUTE SCROLLBAR NOT USABLE. MESSAGE CURRENT SELECTION HAS NO
    EFFECT RETURNED.
    
    HC47003   FILE     :
    No more 'PRJ CONFLICT' error message displayed at FILE READ
    
    HC47007   /NAV4D   :
    4DNAV : DEFECT ON THE MOVE OPERATION AFTER ZOOMING SEVERAL TIMES WITH MOUSE
    BUTTON 2 ON THE MODEL.
    
    HC47019   CATDXF   :
    CATDXF UTILITY FAILS IN ABENDS11 FROM A SPECIFIC MODEL.
    
    HC47034   ST_FRAME :
    PLANAR IDENTIFIER ARE NO LONGER SET AFTER HC44664 INSTALLATION
    
    HC47057   /ANND34  :
    /ANND34 CHANGES ANGLE DIMS FROM DEC DEG TO NUM ADMS INSTEAD OF ANGDEC IN ORDER
    TO KEEP SAME GRAPHISM
    
    HC47059   SOLIDE   :
    CREATE GEOMETRY SWITCH IS NOT APPEARED
    
    HC47060   CATCDMA  :
    THE PRINT EDITOR DISPLAYS NOTHING AFTER ITS WINDOW HAS BEEN REDUCED
    
    HC47061   SHM_AERO :
    SHM_AERO.NO RETURN FLANGE CREATED OPERAND ERROR
    
    HC47084   SOLIDE   :
    SOLIDE / UPDATE LEADS TO ABEND S6
    
    HC47088   ANMESH   :
    UNABLE TO MESH THE MODEL WITH FRONTAL MESHER : CATIA ABENDS U104
    
    HC47097   SKIN     :
    SKIN / DELETE LEADS TO AN ABEND S6. catrace : abort CATTerminate
    CATErrorCATSigHandler CAT2DImagePixelGP
    
    HC47123   SOLIDE   :
    SOLIDE / MODIFY / GEOMETRY / PARM : IMPOSSIBLE TO SWAP A DRAFT NEUTRAL SURFACE
    WITH SWAP PARENT FOR ALL FEATURE O
    
    HC47172   FILE     :
    MODEL TAKES A LONG TIME TO WRITE (MODEL WITH FD&T FEATURES)
    
    HC47183   CATDRAW  :
    CATDRAW UTILITY IN UPDATE EXACT DOES NOT PROJECT FACE - NEED OF CAPABILITY TO
    TREAT FACE ELEMENTS
    
    HC47205   PSN      :
    MODELS CANNOT BE SELECTED IN PSN USING SELECT FUNCTION WITH SAVED QUERY
    
    HC47212   STUDIO   :
    STUDIO : ABEND S11 IN STUDIO/RENDER WITH LARGE SESSION
    
    HC47217   TRANSFOR :
    TRANSFOR + APPLY + REPLACE AUTOMATICALLY SWITCHES FROM HLR TO SHADED MODE
    
    HC47220   MFGPROG  :
    ERROR MESSAGE MAX NORMANGL PROBLEM IS RETURNED IN 5X ISOFAC ALTHOUGH ALLOWED
    NORMANGL VARIATION IS NOT ACTIVE.
    
    HC47231   MODELS   :
    Error message in background when swapping symetrized modelo in a session.
    
    HC47235   SOLIDE   :
    SOLIDE : REORDERING DRAFT OPERATION CAUSES THE PULLIGN DIRECTION TO CHANGE TO
    THE OPPOSITE
    
    HC47246   BENDPART :
    INVALID ACCESS TRYING TO ROTATE AN ELEMENT WITH FK BENDPART / MODIFY / SINGLE
    
    HC47254   ANELFINI :
    ANELFINI STATIC DISP GAUSS RETURNS < ABSOLUTE PIVOT TOO SMALL > ERROR MSG AFTER
    MODIFYING BEAM PROPERTIES
    
    HC47258   FILE     :
    SWITCHING FROM NHR TO SHD FOR A SPECIFIC MODEL LEADS TO AN ABENDS11 OR A CPU
    LOOP.
    
    HC47267   FILE     :
    BAD GRAPHIC PERFORMANCE ON SUN (CHANGE MENU, POPUP DISPLAY)
    
    HC47271   GRAPHIC  :
    GRAPHIC/MOD GEN/CHOOSE/THKNESS OF A *CCV ALSO CHANGES THE DISPLAYED THICKNES OF
    A *SUR
    
    HC47274   SOLIDE   :
    FILLET fails with error message < degenerate element >
    
    HC47299   KINEMAT  :
    KINEMATICS PROCESS DOES NOT HAVE HIS OWN LICENSING DECLARATIVE.
    
    HC47304   FILE     :
    NHR DISPLAY PERFORMANCES IMPROVEMENT
    
    HC47316   MFGVIEW  :
    IMPOSSIBLE TO UPDATE THE ORACLE DATABASE COMMAND NUMERIC FROM 420 TO 421
    
    HC47325   ANMANAGE :
    ANMANAGE EXPORT WITH NASTRAN SOLVER : MPC CARD IN CASE CONTROL D ECK IS NOT
    WRITTEN
    
    HC47330   ANVISU   :
    BATCH CATANVI : new options for SHOW, NOSHOW and OUTPUT commands
    
    HC47334   SOLIDE   :
    SOLIDE/OPERTN/SPLIT DOES NOT WORK
    
    HC47338   CATCDMA  :
    PTF : INTEROPABILITY BETWEEN VPM AND CATIA V420-R2
    
    HC47339   /NAV4D   :
    4DNAV : ZOOMING WITH MB2 WHILE NAVIGATION PALETTE IS OPENED SHOWS THAT THE
    ANGLE IS MODIFIED BY THE ZOOM.
    
    HC47345   STUDIO   :
    STUDIO : PROBLEM WITH MAPPING TEXTURE WITH SUB-ELEMENT OPTION IN TEXTUR3D
    
    HC47347   SOLIDE   :
    SOLIDE + UPDATE fails with error message < invalid domain domain has been
    ignored >
    
    HC47359   AUXVIEW2 :
    AUXVIEW2+USE+NEW+SECTION CUT GET ERROR 709
    
    HC47378   FILE     :
    ABENDS11 when using /CLN before saving a session S0011 / ododes / ofmyrs /
    mcbcal / ofmksb / fctempil / uxswicmd
    
    HC47380   CURVE1   :
    HC36580 (catgeo GCWHEL ) does no longer work on V421-R1
    
    HC47391   AUXVIEW2 :
    BAD PERFORMANCE IN FUNCTION AUXVIEW2 UPD ALL AT 420R1 LEVEL COMPARED TO 419
    LEVEL FOR MODELS WITH MANY DETAIL WORKS
    
    HC47398   AUXVIEW2 :
    AUXVIEW2 GETS IMPOSSIBLE OPERATION CREATING A SECTION CUT ON A SPECIFIC MDL -
    SAME VIEW SUCCESSFULLY CREATED IN PRE
    
    HC47405   ANVISU   :
    ANVISU GIVE 3 VALUES BY NODE FOR CONSTRAINT OF VON MISES
    
    HC47409   /NAV4D   :
    4DNAV : CDMA MODELS SAVED AS MODEL FILES AND LOAD IN 4DNAV AS A SESSION ARE NOT
    CORRECTLY POSITIONNED.
    
    HC47417   /NAV4D   :
    4DNAV : THE HANDLING OF SECTION PLANES IS NOT IN THE SAME WAY THAT MOST
    FUNCTIONS WORK.
    
    HC47425   /NAV4D   :
    4DNAV : PTF DELIVERED ON 421-GA LEVEL NOT CORRECTLY BUILT.
    
    HC47453   PSN      :
    SPACEMAP IS NOT COMPUTED WHEN ELEMENTS ARE OUT OF VOLUME
    
    HC47458   MFGPROG  :
    Internal Error occurs when performing any SMP operations with a Lathe machine.
    
    HC47467   CATCDMA  :
    NOT ABLE TO CREATE A PART WITH '' IN THE PART NUMBER
    
    HC47485   ANELFINI :
    ANELFINI COMPUTE STRUCTUR : ABEND S11 WITH HOLE ELEMENTS
    
    HC47489   FD&T     :
    DATUM TARGET AREA IS SIMPLIFY TO THE UNITY FIGURE WHEN DECIMAL
    
    HC47493   FD&T     :
    EXTRA DECIMALS DO NOT DISPLAYED PROPERLY
    
    HC47497   PIPE_DES :
    WHEN REORIENTING THE PART THE USER GRAPHICS DEFINED ON A PART ARE LOST
    
    HC47509   CATSOE   :
    CATSOE - UPGRADE CONTOUR TO V4 OPTION CAUSES EXACT SOLIDS TO DISAPPEAR FROM
    MODEL + PROBLEM WITH REPLACE NO KEYWORD
    
    HC47513   DXFCAT   :
    DXFCAT CONCATENATES DXF FILENAMES A DXF, B DXF ==> AB DXF
    
    HC47531   SOLIDE   :
    SOLIDE / MODIFY / GEOMETRY / MOVE LEADS TO ERROR MESSAGE PICK IDENTIFIER DOES
    NOT EXIST WITH A SPECIFIC DITTO
    
    HC47542   E3FORMBD :
    RECTANGULAR BNS SWITCH TO CIRCULAR DURING E3FORMBD+CREATE
    
    HC47551   PATTERN  :
    Incorrect first analysis result with PATTERN / ANALYZE for hatching pattern
    
    HC47557   ANMESH   :
    ANMESH MAPPED WITH TE10 : NO CONNECTION WITH INTERMEDIATE NODES
    
    HC47558   DATABASE :
    PART NUMBER NAME DOES NOT APPEAR IN PSN, COREDUMP CREATED
    
    HC47563   ANMESH   :
    ANMESH ELEMENT ANALYSE : TREATMENT OF WARP CRITERIA FOR 3D ELEME NTS
    
    HC47565   SKETCHER :
    MSG STACK DOES NOT EXIST WHEN TRYING TO OPEN THE SKETCHER IN A SPECIFIC MODEL
    
    HC47568   SHM_AERO :
    SHM_AERO.OK IN APPROXIMATION PANEL GIVES WRONG FLANGE
    
    HC47584   ST_FRAME :
    FK ST_FRAME cannot be used when CATSITE.PRJMODEL=TRUE; Section catalog is not
    available.
    
    HC47595   BEAM     :
    BEAM / APPLY OF A SECTION WITH 2 ANCHOR POINTS HAS AN ORIENTATION PROBLEM
    
    HC47599   SOLIDE   :
    An unresolved draft cannot be modified after a SOLIDE UPDATE : it leads to the
    error message ELEMENT NOT IN THE ST
    
    HC47637   MERGE    :
    MERGE - Enhancement to get a warning message before merging 2 models with
    different model dimensions
    
    HC47641   CURVE1   :
    CURVE1 / PROJECT OF LINE DOES NOT WORK THE SAME AS PROJECTION OF A A CURVE
    
    HC47659   DATABASE :
    ROLLBACK KO ON DBLFCAT IF AUTH R--R--R--
    
    HC47668   SKIN     :
    BEAM UPDATE : IT LOOKS LIKE THE SPINE IS CHANGED SOMEHOW DURING THE UPDATE
    PROCESS
    
    HC47675   BEAM     :
    BEAM / EDIT / SWAP OF AN ERASED ELEMENT BY A NEW ONE RESULTS IN INVALID NUMELE
    PARM ERROR MESSAGE
    
    HC47686   CATCLN   :
    If a draft and a detail have the same name in a model, it is sometimes detected
    as a cleaner error 146, sometimes n
    
    HC47690   FILE     :
    Checking of model dimension.
    
    HC47705   SKIN     :
    SKIN : THE MODIFICATION OF A PARAM3D PARAMETER USED FOR THE 3 COORDINATES OF A
    POINT MODIFIES ALL 3 COORDINATES
    
    HC47716   AECMNGT  :
    EQUIP/PRJCATLG/BUILD/MODIFY LEADS UNABLE TO MODIFY PARAMETER VALUE DURING
    RESIZING
    
    HC47718   AUXVIEW2 :
    SOME DRAW SEGMENTS ARE MISSING WHEN UPDATING VIEW IN AUXVIEW2 IN A SPECIFIC VIEW
    
    HC47722   MFGDIES  :
    In MFGDIES, while selecting a PO of LGC in Machining Processing list, you get
    Internal Error.
    
    HC47725   MFGPROG  :
    Major MFGProg delivery : performances, stability improvements
    
    HC47726   PATCH    :
    FK PATCH / FILL CREATES WRONG PATCH specific IBM 260 DUO
    
    HC47731   SOLIDE   :
    The color of a cutting plane used in a split operation swaps to color of SOLIDE
    element after a force update with S
    
    HC47736   SKETCHER :
    SKETCHER - Constraints are lost after creation of a new one.
    
    HC47740   STUDIO   :
    STUDIO : SOME FILE FORMATS ARE MISSING WHEN WANTED TO SAVE A RASTER IMAGE.
    
    HC47754   STUDIO   :
    STUDIO : 2DTEXTURES NOT CORRECTLY MAPPED ON SKINS
    
    HC47757   SOLIDE   :
    SOLIDE OPERATION FILLET EDGE : IT IS IMPOSSIBLE TO SELECT SPECIFIC EDGE.
    
    HC47761   SKETCHER :
    SKETCHER - CONSTRAINT IS PLACED ON THE WRONG ELEMENT
    
    HC47765   MFGPROG  :
    CATIA PPB is outputting wrong sign on C rotation axis.
    
    HC47777   SKIN     :
    BEAM OPERATION LEAVES GEOMETRY (CURVES AND POINTS) THAT HAVE TO BE ERASED
    MANUALLY
    
    HC47781   SW_SETUP :
    PARAMETRIC CONSTRAINTS NO CORRECTLY HANDLED : WRONG DISPLAYED VALUES AND ERROR
    IN BASIC SOFTWARE PROBLEMS
    
    HC47782   SKIN     :
    SKIN UPDATE RESULTS IN ERROR COMMAND NOT FOUND IF ACTIVATE REROUTE BEFORE
    UPDATE IS NOT SELECTED
    
    HC47785   SW_DESGN :
    ADDITIONNAL CATGEO API FOR SHD PRODUCT (GJ7RSEND AND GJ7AXE)
    
    HC47787   SKIN     :
    SKIN ERROR :   USER FEATURE CANNOT BE UPDATED
    
    HC47789   ADPEXTR  :
    CATGEN ERROR 196 IN RTBGREP ROUTINE FOR PART DP14443 (TO COMPLEMENT HC46068)
    
    HC47792   ANMESH   :
    ANMESH FRONTAL : ERROR IN FRONTAL MESHER
    
    HC47796   CATBACK  :
    CATBACK from 421-1 to 420-1 loops when processing models containing solids
    
    HC47800   ANMANAGE :
    ABEND S11 IN ANMANAGE WITH 419 CATIA MODEL
    
    HC47811   STUDIO   :
    STUDIO : UNEXPECTED RESULT WITH STUDIO/RENDERWITH TEXTURE3D MAPPED WITH
    SUB-ELEMENT OPTION
    
    HC47821   MFGPROG  :
    CATIA CORE DUMPS WHEN LEAVING MFGPROG AFTER PP ICON IS SELECTED IN MFGPROG
    
    HC47827   PIPSETUP :
    UNABLE TO CALCULATE PIPE WALL THICKNESS AS PER THE DOCUMENTED PROCESS, IT
    DOESN'T WORK FOR SGI.
    
    HC47835   SOLIDE   :
    ABENDS11 IN SOLIDE WHEN SELECTING A FEATURE IN FEATURE LIST PANEL (SEARCH
    FEATURE CAPABILITY OF PART EDITOR TOOL BA
    
    HC47836   SOLIDE   :
    /GENUUID : highlight problems
    
    HC47839   PUBLISH  :
    PUBLISH : CORRECTION OF CGM COLOR MANAGEMENT
    
    HC47848   AUXVIEW2 :
    AUXVIEW2 ERROR IN EXTRACT VIEW DUE TO HLR PROBLEM
    
    HC47853   ANMANAGE :
    ANMANAGE IMPORT OF LARGE BULK DATA ON HP OPERATING SYSTEM IS NOT POSSIBLE
    
    HC47890   MFGPROG  :
    In MFGPROG while using REWORK PROCESS, altering the tool axis is not saved in
    the machining process.
    
    HC47891   MFGPROG  :
    UNREACHABLE POSITION MESSAGE IS RETURNED DURING AUTOCOMPLETE OPERATION.
    
    HC47903   MFGPROG  :
    In MFGPROG, several problems with LMP product
    
    HC47904   SOLIDE   :
    UPDATING IS LOCKING THE CATIA SESSION
    
    HC47911   AUXVIEW2 :
    ABENDS11 AT AUXVIEW2 MOVE OF A SPECIFIC VIEW INTO SPECIFIC DRAFT ABEND.LOG
    crccop > cgtx2 > cgetx2 > cgcoco > tcvam
    
    HC47930   STUDIO   :
    STUDIO : BIG SESSION RENDERING NOT POSSIBLEUNDER AIX AND SGI
    
    HC47938   MFGPROG  :
    MFG DATABASE : CANNOT SET PARAMETER MFG_CUT_ANGLE TO 180 DEGREES ON NC_DRILLS
    TOOLS.
    
    HC47950   CATDRAW  :
    CATDRAW UPDATE ON SESSION DOES NOT DETERMINE WHICH MODELS THE PROBLEM COME FROM
    WHEN CATDRAW FAILED FOR ANY REASONS
    
    HC47957   AUXVIEW  :
    AUXVIEW + TRANSFER OF A DIMENSION FAILED IN LOOP AND LOCKS UP THE SESSION -
    SAME PROBLEM AS HC27588
    
    HC47961   AUXVIEW2 :
    AUXVIEW2 / USE / VIEW / NEW / section view leads to ABEND S11 S011 ABENDS11
    ERROR S-11 ABEND S011
    
    HC47964   LIMIT23D :
    SCALING : IMPROVEMENT OF THE ERROR DIAGNOSIS MANAGEMENT
    
    HC47969   BENDPART :
    BENDPART.THE BEND IS NOT RECOGNIZED WHEN THERE IS A THICKNESS
    
    HC47974   SW_DESGN :
    OPERATIONS ON SURFACIC PART LEADS ERROR IN SURFACE SOFTWARE AND INVALID ADDRESS
    ALSO LIMITATION ON SURFACIC PART IS
    
    HC47976   ANELFINI :
    TEMP AND COEFF OF THERMAL EXPANSION LIMITS ARE TOO RESTRICTIVE : NEGATIVE
    VALUES ARE NOT ALLOWED
    
    HC47977   SKIN     :
    SKIN / UPDATE RESULTS IN ERROR : CURVE AND SKIN CANNOT BE LINKED
    
    HC47985   E3PLACE  :
    CANNOT LINK A CONNECTOR TO A CONNECTOR IN A OVERLAY MODEL
    
    HC47986   ST_FRAME :
    MODIFY/LIMIT ON DUPLICATED PLANAR CREATED VIA SYMMETRY/COPY LEADS PROTECTED
    ELEMENT
    
    HC47989   ANSEMBLY :
    ANSEMBLY : USER SPECIFIED DIRECTORY FOR GLOBAL STRUCTURE BUILD C OMMANDS IS
    NEEDED
    
    HC47990   ANVISU   :
    ANVISU : ENVELOP PROCESS TAKES TOO LONG
    
    HC48011   ANSOLID  :
    ANSOLID : MATERIAL CHARACTERISTIC TEXT IS NOT CLEAR TO READ IN J APANESE
    ENVIRONMENT
    
    HC48015   CATKI    :
    NEW EXPLODE OPTION OF THE CATKI UTILITY DOES NOT SEEM TO WORK ERROR DETECTED BY
    SUBROUTINE G7MREA - KIEXPLO LABEL :
    
    HC48019   KINEMUSE :
    KINEMUSE PROBLEM - GQRCUR DOES NOT RETURN THE RIGHT ANSWER ON A SPECIFIC MODEL
    
    HC48034   SKETCHER :
    SKETCHER : Undo icon must be selected twice to delete constraints
    
    HC48038   STUDIO   :
    STUDIO : CATDISP DOES NOT LIST JPEG,BMP,RTL,RLB,XPM AS SUPPORTED IMAGE FILE
    
    HC48039   PLOT     :
    PLOT : CROPPED RASTER IMAGE CANNOT BE PLOTTED
    
    HC48051   /NAV4D   :
    NAV4D : CORE DUMP WHEN ROTATION A MODEL ( DUAL PROCESSING )
    
    HC48054   SOLIDE   :
    BREAKING OR DELETING A BRANCH OF A SOLIDE CAUSES THE CORRUPTION OF THE MODEL
    
    HC48071   BENDPART :
    BENDPART ELEMENT UPDATE NEEDS TO MUCH TIME
    
    HC48078   SKIN     :
    SKIN / Tools / MML Links RESULTS IN A CPU LOOP
    
    HC48082   SKIN     :
    SKIN / UPDATE ALL UPDATES FIRST THE SKD THEN A BEAM USED BY THE SKD
    
    HC48086   BEAM     :
    BEAM / EDIT / SWAP CREATES AN INCORRECT BEAM : THE BEAM SWAPS TO THE INCORRECT
    SIDE
    
    HC48094   BEAM     :
    BEAM / EDIT / SWAP RESULTS IN A TWISTED BEAM
    
    HC48102   E3PLACE  :
    CATIA DOES NOT RECOGNIZE E3D STEPLIB MODEL (MENTOR CONTEXT) : I/O Error
    returned.
    
    HC48108   MFGPROG  :
    BAD TOOL MOTION PRODUCED IN GROOVING IN LMP DEPENDING OF TOOL PARAMETERS (R1
    AND R2)
    
    HC48110   SOLIDE   :
    UPDATING SOLIDE GET IMPOSSIBLE TRIM OPERATION
    
    HC48130   E3MANAGE :
    LOCAL SLACK ON A TUBE GUIDED BY A SURFACE CANNOT BE APPLIED FROM A BPP
    BELONGING TO THE SURFACE.
    
    HC48145   CDP      :
    EXTRACT QUERY ON PART THROUGH CDP GIVES BLANK QUERY PANEL
    
    HC48149   CDP      :
    BRINGING G20 LEVEL TO BSF AS OF G21
    
    HC48158   SOLIDE   :
    UPDATE OF MODEL FAILS WITH IMPOSSIBLE SOLID DATA DEFINITION ERRORAFTER CHANGE
    LINK ON AN IMPORT
    
    HC48167   PSN      :
    CATCDMA HAS INCREASED DATABASE SERVER USAGE 417R1 VS 420R1
    
    HC48172   KINEMAT  :
    KINEMAT / DEFINE / COMMANDS results in catia termination CATIA falls into an
    abend
    
    HC48183   PLOT     :
    PLOT OF A CONIC WINDOW LOOPS UNDER AIX 4 3 2 PLOT OF A CONIC WINDOW DOES NOT
    WORK UNDER IRIX
    
    HC48185   ANPHYSIC :
    ANPHYSIC LOAD SET COMBINE FAILS WITH AN ABEND S11
    
    HC48194   DATABASE :
    MODEL REVISIONING EITHER ALPHA OR NUMERIC IN CATCDP
    
    HC48206   PSN      :
    COMMIT/ROLLBACK WITH THE DB2 DATABASE DOES NOT WORK WITH /LINKS IN A CATIA
    SESSION OPENED FROM PSN
    
    HC48217   MFGPROG  :
    PMA MAPPING : CANNOT MAP MILLING FEATURE WHITHOUT TARGET TYPE IN DF2MFMAP ADT
    FILE WITH ANALYSE MODE
    
    HC48219   ST_FRAME :
    Impossible to create Linear Structures using Unspec/PT-PT
    
    HC48221   FILE     :
    IN SOME CONDITIONS, FILE.READ DISPLAYS THE LIST OF SESSION FILES INSTEAD OF THE
    LIST OF MODEL FILES
    
    HC48274   MFGPROG  :
    COMPLEMENTARY MFGPROG DELIVERY : PERFORMANCES, STABILITY, IMPROVEMENTS.
    
    HC48279   /NAV4D   :
    CATITF - VPM : MANAGEMENT OF THE UNICITY ONLY ON THE INSTANCES
    
    HC48286   CATWEB   :
    CATWEB enhancement related to FILE model retrieval
    
    HC48287   SOLIDE   :
    SOLIDE / OPERATN / FILLET / EDGE LEADS TO AN ABEND S11 OR A CPU LOOP ON AIX
    MACHINE.
    
    HC48295   PSN      :
    PSN SESSION MAKER KO WITH OPTION UPDATE ORIGINAL
    
    HC48298   CATCLN   :
    CATCLN FAILS WITH AN U0725 ABEND WHEN RUN ON AN INTERNALIZED LIBRARY
    
    HC48302   CATWEB   :
    CATWEB ENHANCEMENT related to FILE model retrieval
    
    HC48303   FD&T     :
    BAD EXTRACTION OF TOLERANCES WHICH ARE SHIFTED AFTER SEVERAL UPDATES
    
    HC48313   SOLIDE   :
    THE DIRECTION OF THICKNESS CANNOT BE CHANGED BY SELECTION OF A PLANE
    
    HC48314   AUXVIEW2 :
    AUXVIEW2 : TOLERANCE SHIFTS AFTER SEVERAL SUCCESSIF UPDATES
    
    HC48318   GSMPMB   :
    ABEND S6 IN CSGSURF / CCV SKIN / GSMPMB1 / PROJECT
    
    HC48322   BENDPART :
    BENDPART / ELEMENT / CREATE / BEND / STRAIGHT, UNABLE TO PERFORM TASK ON BOTH
    SGI AND IBM
    
    HC48326   CURVE1   :
    IT'S NOT POSSIBLE TO MAKE INTERSECT BEETWEN A PLAN AND A FACE
    
    HC48327   SOLIDE   :
    SOLIDE / CREATE / IMPORT FAILS
    
    HC48331   IUA      :
    /M PTC GIVES INCORRECT COORDINATES OF POINT PARTICULARLY WITH INCH MODEL.
    ANALYSIS SHOWS THE WRONG RESULT
    
    HC48332   SKIN     :
    SKIN : DELETE OPERATION IN PART EDITOR RESULTS IN ERROR : MEMORY ACCESS
    VIOLATION
    
    HC48334   ST_BUILD :
    OPENING/INTERFER RESETS PREVIOUS OPERATE/SUBSTRACT OPERATION
    
    HC48346   SOLIDE   :
    REGRESSION IN ODT SOPSA014 BECAUSEE OF MESSAGE : FORBIDDEN TOPOLOGY ON FILLET
    
    HC48363   SW_SETUP :
    PARTYPE/ATTRIBUTE MATERIAL FOR FREE EDGE LEADS INVALID SCHEMA CUSTOMIZATION
    
    HC48367   SOLIDE   :
    SOLIDE UPDATE (DETAIL WORKSPACE) - ERROR S-11
    
    HC48375   CATWEB   :
    PLOT DOESN'T GENERATE CGM FILE ON SCALE FOR CATWEB 2D VIEWERS
    
    HC48390   BENDPART :
    RADIUS DIMENSIONS DISAPPEAR AT AUXVIEW2 UPDATE BECAUSE OF FSUR RECOMPUTATION AT
    BENDPART MODIFICATION - NEW BEHAVIO
    
    HC48394   INSTIX   :
    GRAPHIC CARD : PROBLEM WITH -X EXTENSIONS SET TO -D 24 WITH A GXT3000P
    
    HC48399   PRJ_SHIP :
    PROJECT/HULL FORM/REPLACE DOESN'T HANDLE FACE SHAPE ORIENTATION CORRECTLY
    
    HC48410   PLOT     :
    PLOT : POSTSCRIPT FORMAT PRINTING NOT POSSIBLE
    
    HC48414   E3PLACE  :
    UIP RJ1PECH MODULE IS NOT CALLED FROM PROGRAM
    
    HC48436   ANALYSIS :
    ANALYSIS GIVES DIFFERENT RESULTS FOR AREAS OF FACES AND SURFACES
    
    HC48443   ADPEXTR  :
    ATS CREATED WITH LEADERS ARE NOT MOVED DURING VIEW UPDATE
    
    HC48448   DXFCAT   :
    DXFCAT - THICKNESS TEXT NOT TAKEN INTO ACCOUNT WITH A STARTUP MODEL.
    
    HC48450   SOLIDE   :
    CATCLN DETECTED ERR60 AFTER SOLIDE+EXTRACT+CUT OPERATION
    
    HC48456   CURVE1   :
    CURVE1 / PROJECT / MERGE falls in an ABEND U727
    
    HC48462   E3INSTAL :
    E3INSTAL/UPDATE DOES NOT MOVE BUNDLE
    
    HC48472   SOLIDE   :
    UPDATE OF MODEL FAILS WITH ERROR MESSAGE < INTERNAL ERROR > ERRORWHEN CHANGING
    LINK ON AN IMPORT.
    
    HC48473   SOLIDE   :
    SOLIDE EXTRACT PRIMSOL ON SCALED SOLIDE DELIVER UNUSABLE TEXT (PRSM-INDENTIFIER)
    
    HC48477   SOLIDE   :
    SOLIDE + OPERATN + SUBSTRACT FAILS WITH ERROR MESSAGE < MISSING GEOMETRICAL
    SOLUTION >
    
    HC48487   AUXVIEW2 :
    AUXVIEW2 PROJECTION DOES NOT EXTRACT ALL EXPECTED GEOMETRY WHEN VIEW IS CREATED
    BY SELECTING A PLANE OR A SOLID FSU
    
    HC48490   ADPEXTR  :
    NOT POSSIBLE TO PERFORM A MULTIPLE BREAKOUT ON BENDED PIPES
    
    HC48518   AUXVIEW2 :
    AUXVIEW2 + UPDATE LEADS TO IMPOSSIBLE OPERATION WHEN SPLITTING SPACE DITTO WITH
    DEFINED CUTTING PLANE
    
    HC48522   PSN      :
    PSN KO WITH IDENTIFY IN PSN FROM 4DNAVIGATOR
    
    HC48526   MFGPROG  :
    CANNOT USE FOLLOW MODE ON CURVES IN LMP
    
    HC48530   SW_DESGN :
    PART/MODIFY WEB THICKNESS KEEP OLD VALUE IN DATA STRUCTURE
    
    HC48532   /NAV4D   :
    4DNAV : some specific models displayed in CATIA but not in 4D NAVIGATOR
    
    HC48543   ROBUSE   :
    ROBUSE / TRACK FALLS INTP ERROR 719 when selecting an axis twice
    
    HC48547   ERASE    :
    Abend U104 when attempting to erase all space elements *SPC in a model
    
    HC48551   SKIN     :
    SKIN DUPLICATION OF ELEMENTS IN PASSIVE MODEL RESULTS IN ABEND S06
    
    HC48555   ANMANAGE :
    ANMANAGE EXPORT WITH NASTRAN SOLVER : EXPORT OF ALL NODES IN A S PECIFIC LOCAL
    AXIS SYSTEM
    
    HC48570   CATDXF   :
    SOME 3D ELEMENTS ARE NOT TRANSLATED BY DXFCAT UTILITY.
    
    HC48576   DATABASE :
    Extension of caching mechanism for CATIA management
    
    HC48582   AUXVIEW2 :
    EXTRA LINES APPEAR IN AUXVIEW2 VIEWEVEN WITH HLR REPRESENTATION CORRECT /CLN
    RETURNS INVALID DATA BLOCK AFTER EACH
    
    HC48586   SHM_AERO :
    SHM_AERO.FLANGE NOT RECOGNIZE IF CURVE SELECTED
    
    HC48656   DATABASE :
    ROLLBACK KO ON DBLFCAT IF AUTH R--R--R-- (2E)
    
    HC48660   /NAV4D   :
    4DNAV - INTERFER : INTEGRATION OF TurboCatitf and VPM
    
    HC48662   MFGPROG  :
    In Pocketing operation with several levels of path, depending path Start Points
    are different.
    
    HC48668   SOLIDE   :
    AFTER SOLIDE / MODIFY / GEOMETRY / PARM OF A DRAFT, CATCLEAN GIVES THE CATEGORY
    1 ERROR 115
    
    HC48686   AUXVIEW2 :
    AUXVIEW2 - LOCKED VIEWS CAN STILL BE MODIFIED
    
    HC48701   E3FORMBD :
    E3FORMBD/COMPARE/BUNDLE FREQUENT ERROR 20065
    
    HC48705   SOLIDE   :
    S6 IN SOLIDE / UPDATE
    
    HC48728   ANMANAGE :
    Msg CATSYMB09 : Symbol GFWMSH cannot be treated and abend U0999 when a user
    written application is executed.
    
    HC48735   PLOT     :
    PLOT : SOME PLOT.DCLS POINT TO POSSIBLY INACCESSIBLE DIRECTORIES
    
    HC48736   PLOT     :
    PRINT : THE DIRECTORY AND FILE FIELDS ARE BLANK IN THE FKPRINT MODE TIFF.
    
    HC48750   DIMENS2  :
    Wrong display of radius dimension with DIMENS2 / CREATE / RADIUS / CIR CNT
    
    HC48764   LIMIT23D :
    LIMIT2 / FACE / CREATE / SURFACE falls in an ABEND U104
    
    HC48772   SW_DESGN :
    PROFILE SECTION UPDATE WITH SLAVE LEADS WRONG LOCATION OF BRACKET WELDED ON THE
    PROFILE
    
    HC48775   FILE     :
    MODIFYING THE VISU MODE FROM NHR TO SHD LEADS TO AN ABEND S11
    
    HC48778   ST_FRAME :
    PERFORM LIMIT OR PERFORM SPLIT DOES NOT CUT WITH SLANT THE PART
    
    HC48789   PIPSETUP :
    INCORRECT WALL THICKNESS ATTRIBUTES IF DEFINED IN CATALOG UNDER PART MANAGE.
    
    HC48798   BEAM     :
    BEAM / UPDATE does not work : it is a problem specific to IRIX and it works
    fine in AIX
    
    HC48802   ST_BUILD :
    OPERATE SUBSTRACT IS NOT POSSIBLE BECAUSE OF MSG : NO MESSAGE AVAILABLE
    
    HC48809   SOLIDE   :
    SOLIDE / CREATE / IMPORT fails with INCOMPATIBLE MODEL TOLERANCES message.
    
    HC48824   MFGPROG  :
    PROBLEM CREATING A POST PROCESSOR FOR A MACHINE TOOL WITH DOUBLE TILTING HEAD
    
    HC48825   LIMIT23D :
    LIMIT2 VOLUME fails with 'ERROR IN SOLIDS SOFTWARE' error message
    
    HC48830   CATFONT  :
    GICFLU and GICUFL : error management should use label
    
    HC48836   BENDPART :
    BENDPART / DELETE . INVALID NUMBER FOR CSG BRANCH MESSAGE WHEN ATTEMPTING TO
    DELETE A WALL.
    
    HC48837   BENDPART :
    BENDPART.CREATING A LABEL ON A WALL AFTER DELETING A FIRST LABEL GIVES MSG
    INVALID ADDRESS
    
    HC48844   SOLIDE   :
    SOLIDE : Performance improvements DROP1 for V4R2.1refresh1.
    
    HC48860   AUXVIEW2 :
    AUXVIEW2 + SECTION VIEW - TANGENT CUTTING PROFILE WHERE AS THE INTERSECT
    OPERATION IS WELL PERFORMED - REGRESSION A
    
    HC48866   CATEXP   :
    CATEXP ENDS WITH A CODE 0 BUT FAILS TO EXPORT A MODEL
    
    HC48870   SHM_AERO :
    SHM_AERO.HOLE LOCATION IN JOGGLED AREA NOT COMPENSATED
    
    HC48887   MFGPROG  :
    THE GROOVE BOTTOM ARE NOT RECOGNIZED
    
    HC48905   PLOT     :
    PLOT : SOME MODELS PLOT HEAVY LINE WEIGHT AT HALF SCALE NEGATIVE VALUES ARE
    GENERATED INSIDE THE IBMGL FILE
    
    HC48909   MFGPROG  :
    Replaying an operation you get message 'Geometry not found', if you are using a
    Cutter Detail.
    
    HC48936   CURVE1   :
    CURVE1 + INTERSECT : THE NO OPTION DOES NOT WORK AFTER MAKING THE
    MULTI-SELECTION WITH *SEL
    
    HC48942   AUXVIEW2 :
    AUXVIEW2+UPDATE FAILS WITH ABENDS11 ON SPECIFIC MODEL
    
    HC48946   SOLIDE   :
    SOLIDE / OPERATN / SPLIT : LEADS TO MISSING GEOMETRICAL SOLUTION ERROR MESSAGE
    
    HC48957   SOLIDE   :
    SOLIDE + UPDATE fails with error message < twisted fillet >
    
    HC48975   LIMIT23D :
    LIMIT2 SKIN CREATE LEADS TO ABEND U104 - SPECIFIC MODEL ERROR LM2SKI > LM2SKC >
    SKWCSK > TSTVOL > TSTVO2 > DETES
    
    HC48982   DUCTWORK :
    DUCTWORK gives INVALID ADDRESS on IRIX when placing a custom part - (no problem
    using AIX)
    
    HC48991   /NAV4D   :
    4DNAV : PROBLEM WITH MODEL COLOUR WHEN USING GROUP GRAPH TOOLS
    
    HC49011   MFGPROG  :
    Navigation option for Part Surfaces should be available. (for Global Flank, 3D
    SIDE,3D CURVE,5X CURVE)
    
    HC49015   SOLIDE   :
    SOLIDE / CREATE / COMPLEX / OFFSET gives the error message ILLEGEL ST
    
    HC49020   SOLIDE   :
    SOLIDE / MODIFY /TRANSLATE OF A PRISM DRAFTED WITH THE SAME SURF FOR NEUTRAL
    AND PARTING ELEMENT IS IMPOSSIBLE
    
    HC49031   FILE     :
    In some cases, FILE INFORMATION window contents is no more displayed
    
    HC49035   SOLIDE   :
    SOLIDE / UPDATE LEADS TO AN ABENDS11 ON AN AIX MACHINE.
    
    HC49053   TUBING   :
    ERROR U0104 AFTER SOME STEPS IN TUBING FUNCTION AND SAVING MODEL AFTER. ON
    OTHER MACHINES U0502 IS RETURNED.
    
    HC49057   ANSOLID  :
    ANSOLID : PROBLEM IN CONTACT RESTRAIN CREATION ON RSUR
    
    HC49072   SOLIDE   :
    FACES ARE NOT SIMPLIFIED ON FK SOLIDE / INSERT / UNION
    
    HC49076   NCVERIF  :
    IN NCMILL, HELICAL POCKET OPERATION DOES MACHINE ONLY THE FINAL CONTOURING
    
    HC49080   NCMILL   :
    IMPOSSIBLE TO GENERATE TOOLPATH FOR 5X/FAC-ISO OPERATIONS CREATED ON 417
    REFRESH 1 LEVEL.
    
    HC49090   ANSOLID  :
    ANSOLID COMPUTE GIVES MEMORY FAULT ERROR ON HP OPERATING SYSTEM
    
    HC49093   MFGPROG  :
    TDB PERFORMANCE PROBLEM
    
    HC49098   MFGPROG  :
    ERROR IN OPPOSITE HAND TREATMENT WHILE DOING OPPOSITE BY TRACUT WITH KEEP
    MACHINING CONDITIONS
    
    HC49101   CURVE1   :
    CURVE1 PROJECT RETURNS % NO PROJECTION % ERROR WHEN ATTEMPTING TO PROJECT A
    BEZIER CURVE ONTO A BEZIER SURFACE
    
    HC49116   NCMILL   :
    S011 ABEND WHEN MODIFYING MACRO IN NCMILL
    
    HC49123   MFGPROG  :
    CATMFG REMOVES NEEDED DUPLICATE POINTS
    
    HC49127   MFGPROG  :
    UNABLE TO PERFORM POCKET OR AREA CLEAR ON A TAPERED PLANE
    
    HC49131   NCVERIF  :
    IN HELICAL POCKET, TWO CENTRAL ISLANDS ARE MISSING IN TOOL PATH
    
    HC49135   SOLIDE   :
    SOLIDE / UPDATE leads to ERROR 722 INVALID /DATA/ DESCRIPTION TYPE
    
    HC49139   E3PLACE  :
    E3PLACE CREATES EXTRA PLACEMENT POINTS IN THE MODEL
    
    HC49143   FILE     :
    PARTIAL SHADING VISUALISATION OF GRN ELEMENT ON HP-UX MACHINE WITH A SPECIFIC
    HP-UX PATCHES LEVEL.
    
    HC49145   SOLIDE   :
    SOLIDE + OPERATN + FILLET + EDGE fails with error message < interrupted fillet
    > in case of multi-selection.
    
    HC49169   SHM_AERO :
    SHM_AERO.FLANGE NOT CREATED TOO MANY SIDE LIMITS
    
    HC49177   EQUIP    :
    EQUIP : IMPORT EQUIPMENT FROM LAYOUT SHOULD NOT LOAD P&ID
    
    HC49183   /NAV4D   :
    4DNAV : MODEL TRANSPARENCY NOT BEING VISUALISED CORRECTLY
    
    HC49196   SOLIDE   :
    THICKNESS FEATURE CANNOT BE MODIFFIED
    
    HC49197   SOLIDE   :
    SOLIDE + FILLET - FILLET FAILSWITH ERROR MESSAGE < SELF RELIMITATION OF RIBBON
    FAILED >
    
    HC49213   CURVE1   :
    ABEND S11 ON FK CURVE1 / PROJECT WITH SPECIFIC SURFACE AND CURVE YPREVA >
    FN2PRO > YNUMDE > YSPRCA > COUDUR4 > WPCR
    
    HC49225   MFGPROG  :
    FIX CIRCULAR MACRO IN GLOBAL FLANK CONTOURING
    
    HC49226   PATHWAYS :
    ELEMENT NOT IN STACK ERROR IN PATHWAYS - context of customized UIP -. Generic
    CATIA is correct.
    
    HC49244   PATHWAYS :
    INCOMPLETE ANALYSE ON THE EXISTENCE OF AN EQUIPOTENTIAL LINKED TO THE PATHWAY
    
    HC49252   MFGPROG  :
    TOOL AXIS CONTROL FOR THE PO START POINT
    
    HC49253   SHM_AERO :
    SHM_AERO.FLANGE INCORRECTLY MOVES IF FLANGE CUTOUT
    
    HC49257   MFGPROG  :
    EXTRA GEOMETRY CREATED AFTER ENTERING IN 5X GUIDED CUTTING GEOMETRY
    
    HC49259   BENDPART :
    BENDPART.AFTER SPLITTING A FLAT WALL BY CONTOUR SOME GEOMETRY IS NOT REMOVED
    
    HC49260   BENDPART :
    BENDPART.UNFOLD WALL WITH WALL CUT NEEDS A BR
    
    HC49268   STRUCTUR :
    After a CATEXP/CATIMP, the material table may be damaged in environment
    CATSITE.PRJMODEL=TRUE;
    
    HC49274   PIPE_DES :
    ISO EXTRACTION HANGS THE MACHINEusing customers model
    
    HC49282   PIPE_DES :
    BAD ORIENTAION OF TEE IN THE ISO ONE END IS NOT VERTICAL
    
    HC49290   SOLIDE   :
    LIMIT SURFACE CAN T BE EXTRAPOLATED ON FK SOLIDE / DRAFT
    
    HC49298   CATIGE   :
    PRJMODELS TAKES UNREALISTIC LONG TIME FOR CATIGE THAN NON-PRJMODEL.
    
    HC49309   SOLIDE   :
    INTERNAL ERROR ON FK SOLIDE / OPERATN / DRAFT (REFLECT)
    
    HC49313   AUXVIEW2 :
    MARKUP NOT GENERATED ON UNFOLDED VIEW FOR A SPECIFIC HOLE - SYMMETRICAL HOLE IS
    CORRECTLY MANAGED BY AUXVIEW2
    
    HC49320   TUBING   :
    Error message MODULE NOT FOUND returned when attempting to create extremity or
    length tub surf.
    
    HC49331   PLOT     :
    PLOT : INTERMITTANT BAD POSTSCRIPT FILES PRODUCED
    
    HC49335   MFGPROG  :
    ERROR REPLAYING LOCAL CAVITY ROUGHING
    
    HC49340   SOLIDE   :
    ERROR U700 ON FK SOLIDE / OPERATN / DRAFT (REFLECT)
    
    HC49346   AUXVIEW2 :
    RENAME CALLOUT IDENT OR VIEW NAME LEADS TO INVALID AUXVIEW2 IDENTIFIER ON
    SPECIFIC VIEW EVEN IF NO LETTER IS USED T
    
    HC49350   SOLIDE   :
    INTERNAL ERROR ON FK SOLIDE / OPERATN / DRAFT (STD)
    
    HC49356   KINEMUSE :
    K10N4D PROCESS DOES NOT STOP AFTER RUNNING KINEMATICS UNDER 4DNAV - 4DNAV
    PROCESS THEN K10N4D PROCESS MUST BE KILLE
    
    HC49359   SOLIDE   :
    PROBLEM WITH A SPECIFIC ARC DURING STEP CONVERSION WITH A SOLID
    
    HC49370   AUXVIEW2 :
    AUXVIEW2 UPDATE -> OBJECTS CONFLICT RETURNED WITHOUT ANY REFEREN CES TO THE
    INVOLVED DETAIL WORKSPACES - /HELP ENHA
    
    HC49374   AUXVIEW2 :
    AUXVIEW2 DOES NOT GENERATE CENTERLINES WHEN EXTRACTING A SWEEP SOLID PRIMITIVE
    + CAPABILITY TO GENERATE MARKUP ON O
    
    HC49378   MFGPROG  :
    PERFORMANCE PROBLEMS WITH GLOBAL FLANK CONTOURING
    
    HC49382   MFGPROG  :
    IN MOLD AND DIE THE FEEDRATES SPECIFIED IN THE MACROS DO NOT GET APPLIED IN THE
    REWORK MACHINING PROCESS
    
    HC49386   AEC_TEXT :
    AEC Tag placement does not allow access to Equipment Assembly
    
    HC49398   FILE     :
    ABENDS11 in /LINK command. S0011 / sluupdor / gicorgp / ldlgpt / call_entry
    
    HC49410   E3INSTAL :
    LINKED BPP CANNOT BE DELETED (NO ACTION - NO MESSAGE) WHEN PERFORMING
    E3INSTAL/DELETE/ELEMENT.
    
    HC49419   GJBCOM   :
    CPU LOOP IN GJBCOM WHEN ATTEMPTING TO COMPUTE A GBN.
    
    HC49424   E3FORMBD :
    BPP AND BSJ INCORRECTLY POSITIONED ON FORMBOARD
    
    HC49431   SPCDR2   :
    SPC->DR2 DOES NOT PROJECT SOLIDS AND DITTOS USING *SOL> KEYWORD WITH NO ERROR
    MESSAGE - KEYING IN *SOL+*DIT GIVES D
    
    HC49433   DIMENS2  :
    Third selected element ELLD is detected as PTD with DIMENS2 / DISTANCE in
    CUMULATE model. NON ASSOCIATIVE DIMENSION
    
    HC49439   CURVE1   :
    CPU LOOP ON FK CURVE1 / PROJECT PROJECTING SPECIFIC CURVE ON SPECIFIC SURFACE -
    NO TRACE
    
    HC49448   CATITF   :
    DIFFERENT RESULTS USING CATITF AND N4D
    
    HC49450   AECMNGT  :
    EDIT/TRANSFOR/SYMMETRY/COPY FAILS ON STRUCTURAL MEMBERS WITH ERROR IN BASIC
    SOFTWARE
    
    HC49453   TEXTD2   :
    QUICKTEXT changes frame attribute
    
    HC49454   SW_DESGN :
    CREATE SKETCHED BRACKET ON STARBOARD LEADS LINES OR POLYGONES CROSS MESSAGE
    
    HC49471   CATIGE   :
    CATIGE - BY LINE COMMAND (BATCH) DOES NOT WORK WITH -X OPTION WITH COMMENTS YES.
    
    HC49487   FILE     :
    Model directory does not appear anymore in the list of files given by
    FILE.FILE, after it has been mounted using /c
    
    HC49519   PSN      :
    ZONE FILTER DOES NOT GIVE EXPECTED RESULT IN SPITE OF APPLYING PTFS
    UB62893,UB62895
    
    HC49526   SOLIDE   :
    ERROR 709 with SOLIDE / MODIFY / OPERATN / DELETE / NO KEEP
    
    HC49571   CDM      :
    128MB NOT ENOUGH TO RUN CATCDMA AND CATIA ON AIX432
    
    HC49575   SKIN     :
    SKIN / OPERATN / ASSEMBLE RESULTS IN ERROR MESSAGE INCONSISTENCY : TRY FORCE
    UPDATE BUT IT DOESN'T WORK
    
    HC49579   FD&T     :
    FD&T : TOO MANY LEADERS CREATED ON DATUM AND EXTRANEOUS LEADERS SHOWN IN
    AUXVIEW2 VIEWS FOR GD&T.
    
    HC49584   SOLIDE   :
    After a SOLIDE ANALYZE SELF INERTIA done on a local solid, when coming back to
    global solid, the solid must be upda
    
    HC49587   E3FORMBD :
    E3FORMBD/DELETE : 'Invalid address' message when deleting a BNS
    
    HC49588   ANELFINI :
    ANELFINI : VARIOUS CORRECTIONS FOR CATIA AEROELASTICITY
    
    HC49592   SOLIDE   :
    After SOLIDE MODIFY GEOMETRY PARM on a revolution primitive, changing A1 by a
    negative value leads to an incorrect
    
    HC49601   MFGPROG  :
    Abend occurs while replaying a MO
    
    HC49604   SOLIDE   :
    ABEND U104 ON FK SOLIDE / OPERATN / SEWING
    
    HC49626   /NAV4D   :
    4DNAV : SPACEBALL AND DYNAMIC LOD.
    
    HC49633   SOLIDE   :
    ABEND S0011 S11 occurs with SOLIDE/MODIFY/GEOMETRY/PARM and CONT option. This
    problem is specific HP.
    
    HC49637   SOLIDE   :
    SOLIDE / CREATE / CANONIC / SWEEP LEADS TO ABEND S11
    
    HC49643   PIPE_DES :
    Pipe_Des / part / place gives message : Location is not well defined. Help
    gives 20030 there must be at least one
    
    HC49651   NCVERIF  :
    IN HELICAL POCKET, ACCORDING START POINT OF OPERATION, TOLL COLLIDES ISLAND.
    
    HC49656   BEAM     :
    BEAM CATALOG MANAGE DELETECLASS : cannot delete the last section.
    
    HC49663   NCVERIF  :
    WRONG TOOLPATH GENERATED FOR HELICAL POCKET OPERATION
    
    HC49671   NCVERIF  :
    TOOLPATH GENERATED FOR HELICAL POCKET OPERATION COLLIDES ISLAND.
    
    HC49685   FILE     :
    GCWTRI SUBROUTINE RETURNS WRONG COLOR TOKEN PARAMETERVALUE
    
    HC49688   FILE     :
    NHR DISPLAY MODE PERFORMANCE IMPROVEMENT WHEN DISPLAYING EXACT SOLIDS.
    
    HC49717   GLOBDEF  :
    SKIN / FEATURE / SKIN / LOFT RESULTS IN ERROR :   ELEMENT TYPE IS INVALID
    
    HC49731   AUXVIEW2 :
    ERROR WHEN EXTRACTING WITH AUXVIEW2 A SECTION VIEW OF A SESSION => ERASED
    ELEMENT
    
    HC49779   CATCLN   :
    Impossible to process corrupt ASCII-DS models
    
    HC49782   MFGPROG  :
    PMA : MISSING CATGEO TO ANALYSE END CONDITIONS ON AXIAL FEATURES
    
    HC49785   AUXVIEW2 :
    AUXVIEW2+ANALYZE+VIEWS CROSSES UPDATED VIEWS DOES NOT WORK
    
    HC49789   AUXVIEW2 :
    AUXVIEW2/UPDATE FAILS WITH AN ABEND NUMBER : S0006
    
    HC49797   SOLIDE   :
    SOLIDE / CREATE / COMPLEX / OFFSET RESULTS IN ERROR :   IMPOSSIBLE GEOMETRY
    
    HC49811   SOLIDE   :
    VOLUME CALCULATION INCORRECT WHEN SPLIT BY GIWBOP GIWBOO GIWSSP
    
    HC49815   COV_ENG  :
    COV_ENG / ANALYZE causes a loop without giving result. To interrupt the
    operation causes an abend U0777
    
    HC49818   DIMENS2  :
    DIMENS2 / MODIFY / EXT LINE / LENGTH leads to message PROJECTED POINT ON CURVE
    MUST EXIST
    
    HC49823   CATCLN   :
    /CLN DOES NOT WORK FOR PROVIDED MODEL UNABLE TO ALLOCATE MSG
    
    HC49847   CATCDMA  :
    USING QUICK IMPORT FUNCTION, THERE IS NO DEFAULT VALUE IN REPOSITORY FIELD
    
    HC49856   SOLIDE   :
    CAN NOT KEEP THE SOLIDE UPDATE WITH CATCMD PROJ BRANCH SOLID FILE = FALSE
    
    HC49859   MFGPROG  :
    LACK OF INFORMATIONS FOR 5X_CONTACT_CURVE, 5X_SIDE_CURVE AND 5X_TIP_CURVE IN
    PROGRAM TAB OF MFGPROG.
    
    HC49861   CATITF   :
    CATITF LEADS TO ABEND S0006
    
    HC49870   COV_ENG  :
    COV-ENG / MODIFY : NO CLOSED RESULTING CONTOUR
    
    HC49875   PRJ_SHIP :
    PROJECT/REFERENCE PLANES LEADS WRONG NUMBERING WHEN ADDING NEGAT IVE LONG PLANES
    
    HC49888   GYYCNV   :
    GYYCNV : annotation upgrade catgeo does not work with MNUM=2
    
    HC49907   POINT3D  :
    POINT / TANGENT CAUSES AN ERROR SEARCH FAILED MESSAGE BETWEEN A LINE AND A
    CURVE. IT OCCURS IN SGI IRIX SYSTEM
    
    HC49916   ANALYSIS :
    ANALYSIS / RELATIVE GIVES WRONG RESULTS IN IRIX SYSTEM ALTHOUGH THE RESULT IS
    CORRECT IN AIX SYSTEM.
    
    HC49917   SW_DESGN :
    PART COPY ADVANCED MIDSHIP SYMMETRY CREATES BRACKETS BOTTOM DOWN AND SKETCHER
    DETAIL CONSTRUCTION IS VISIBLE
    
    HC49921   SW_DESGN :
    ERROR IN BASIC SOFTWARE DURING PART COPY ADVANCED TRANSLATE AND MANY PARTS ARE
    NOT COPIED
    
    HC49925   SW_DESGN :
    PART COPY ADVANCED MIDSHIP SYMMETRY LEADS APPLICATION OBJECT DOE S NOT EXIST
    
    HC49926   DATABASE :
    Interoperability between CDMA and CDP for V421R1
    
    HC49931   MFGPROG  :
    PROBLEM IN MANAGEMENT OF LICENSES MAD, PMP AND SMP : CATIA CRASHES DURING
    INTIALIZATION OF MFGPROG FUNCTION.
    
    HC49934   GYYCNV   :
    GYYCNV : text upgrade catgeo fails for some geometric tolerance
    
    HC49954   SW_DESGN :
    ELEMENT NOT IN THE STACK DURING WELDING LINES CREATION ON WALL
    
    HC49965   MFGPROG  :
    IN 5X GUIDED CUTTING MO, EVERY TIME A PLANE IS SELECTED AS GUIDING ELEMENT, IT
    IS DUPLICATED.
    
    HC49972   CATDXF   :
    SPECIFIC SYMBOLS 'COUNTERSINK', 'DEPTH' ARE NOT TRANSLATED BY DXFCAT UTILITY .
    
    HC49982   AECMNGT  :
    AECFrame/Edit/Transfor in Chain Mode produces incorrect result
    
    HC50027   SOLIDE   :
    SOLIDE / MODIFY / DRESSUP / HLR EDGE results in INVALID INPUT message.
    
    HC50035   FILE     :
    HRD/HLR Display mode : Nothing is displayed when the setting
    CATIA.GLOBAL_EXTENDED_DATA is set to ZERO.
    
    HC50036   SOLIDE   :
    Transformation cannot be performed on solide : message ERROR IN SOLIDE SOFTWARE
    with SOLIDE / TRANSFOR / TRANSLAT
    
    HC50047   SOLIDE   :
    SOLIDE + UPDATE fails with error message < tangent element > during sewing
    calculation.
    
    HC50057   SOLIDE   :
    ABEND ERROR S11 ON FK SOLIDE / OPERATN / FILLET / TRITGT
    
    HC50059   SW_DESGN :
    WELDING LINES CREATION ON COMPOSITE WEB LEADS INVALID ADDRESS
    
    HC50062   AUXVIEW2 :
    WRONG BEHAVIOUR IN AUXVIEW2 + BACK CLIPPING PLANE
    
    HC50073   SOLIDE   :
    ABEND ERROR U0104 ON FK SOLIDE / OPERTN / FILLET / EDGE
    
    HC50077   SURF2    :
    SURF2 CREATE CURVE CRV CRV leads to Anebd U104 Model specific problem
    
    HC50082   SOLIDE   :
    SOLIDE UPDATE after activating a draft in a SOLIDE multi-model environment
    leads to a CPU loop.
    
    HC50089   SW_DESGN :
    MODIFY PART MATERIAL IS NOT POSSIBLE IF NO VALUE WAS ENTERED DUR ING PART
    CREATION
    
    HC50090   SOLIDE   :
    SUBTRUCT REVOLUTION FROM REVOLUTION CAUSES ABENDS10
    
    HC50098   SOLIDE   :
    THICKNESS OF CUBOID IN SOLIDM CANNOT BE MODIFIED IN SOLIDE AFTER a SOLID TYPE
    MIGRATION.
    
    HC50100   SW_DESGN :
    DEFAULT MATERIAL ATTRIBUT SET DURING PART CREATION IS NOT TAKEN INTO ACCOUNT
    
    HC50115   KINEMUSE :
    SAFEWORK : ENTER IN VISION PANEL MAKES IT CLOSE - BLIND SPOT INCORRECTLY
    DISPLAYED - CANNOT MOVE MANNIKIN WITH NU
    
    HC50119   FILE     :
    File.Open fails to open V5R2 CATPart in a CATIA V4 session (interoperability
    problem - operating system dependent)
    
    HC50120   ISOSETUP :
    CUST REQ SUPPORT FOR OFFSET INPUT (ISO) RED_ECC displays incorrect offset
    values when part is rotated.
    
    HC50125   ANSOLID  :
    MODIFIED SOLID IS NOT RECOGNIZED IN ANSOLID FUNCTION
    
    HC50128   SOLIDE   :
    SOLIDE FILLET IN ROLLING EDGE MODE GENERATES SURFACES WITH NO DESCRIPTION - NO
    CAPABILITY TO POINT THE SURFACE WITH
    
    HC50133   PIPSETUP :
    PIPSETUP / CATALOG / PIPESPEC / GENERATE RESULTS IN CATIA ABEND U0104 (
    ABENDU104 )/ ABEND S11
    
    HC50139   SW_DESGN :
    MODIFY GEOMETRY LIMIT TAKES INTO ACCOUNT WRONG LIMIT TO MODIFY
    
    HC50144   AUXVIEW2 :
    AUXVIEW2 NEW DETAIL VIEW GIVES INVALID IDENTFIER. CALLOUT IDENTIFIER DIFFERS
    FROM VIEW NAME
    
    HC50156   LIMIT23D :
    LIMIT2 CREATE FACE SURFACE leads to CPU loop. Model specific error
    
    HC50159   SW_DESGN :
    MODIFY GEOMETRY SUPPORT IS NOT TAKEN INTO ACCOUNT AFTER PART UPD ATE
    
    HC50180   CATMFG   :
    COMPLETION CODE = 8 ERROR = 20016
    
    HC50182   ADPEXTR  :
    SHELLPLATE VIEW UPDATE LEADS  MODEL CONTAINS DEGENERATED SURFACE
    
    HC50198   SOLIDE   :
    SOLIDE OPERATN FILLET EDGE on a specific redge leads to the error message
    CLOSED CONTOUR WITH ONLY ONE EDGE.
    
    HC50203   SW_DESGN :
    MARKLINE ON EXTRACTED VIEW DOES'NT CORRESPOND TO WELDED EDGE LENGTH OF THE
    PROFILE BUT TO THE MASTER PART LENGTH
    
    HC50206   SOLIDE   :
    SOLIDE / MODIFY / GEOMETRY / PARM FOR SPECIFIC DRAFT ANGLE VALUE
    
    HC50217   SKETCHER :
    ELEMENTS NOT MODIFIED IN SKETCHER GO INTO NO SHOW
    
    HC50220   SKETCHER :
    SKETCHER- RELIMIT IN SKETCHER DOES NOT RELIMIT IN SPACE
    
    HC50243   SOLIDE   :
    SOLIDE / OPERATN / UNION : CPU LOOP ON AIX - UNION OK ON SOLARIS
    
    HC50253   MFGPROG  :
    MFGPROG : SEVERAL PROBLEMS WITH LMP PRODUCT
    
    HC50255   E3PLACE  :
    E3PLACE / PLACE / CONNECTR / LIB ACCS / USER LEADS TO ABENDS11 IN CATIA WITH CDM
    
    HC50262   CDM      :
    CANNOT UPDATE PART ATTRIBUTES WHEN INSERTING IN CDMA
    
    HC50266   E3FORMBD :
    CONNECTOR ARE NOT POSITIONNED FLAT ON FORMBOARD.
    
    HC50281   SW_DESGN :
    PART UPDATE SLAVES ON WEB BEAM LEADS IMPOSSIBLE UPDATE FOR CUTOU TS
    
    HC50288   PRINT    :
    PRINT PSN GRAPH 2 TIMES => CDM SCRATCH
    
    HC50302   SHM_AERO :
    SHM-AERO.JOGGLE COMPENSATION SPOILS FLANGE
    
    HC50315   AEC_TEXT :
    VIA EDIT/ANNOTATION/ATTRIBUT MSG INVALID ADDRESS IS MET WHEN SHE LL PLATE PART
    IS SELECTED TO ANNOTATE ITS THICKNES
    
    HC50327   SOLIDE   :
    improvement in unresolved fillet management
    
    HC50338   AUXVIEW2 :
    /THREAD do not work on holes created as round prisms with until /from-to
    
    HC50345   KINEMUSE :
    TOOLS / KINEMATIC DOES NOT SHOW KINEMATIC SET
    
    HC50368   AEC_TEXT :
    VIA EDIT ANNOTATION THE THICKNESS ATTRIBUT VALUE IS 1000 TIME ON PLATE PART
    (CATIA.UNIT_MODEL=1.000mm instead of 10
    
    HC50374   MFGPROG  :
    EXTRA GEOMETRY CREATED IN 3X_GUIDED_CUTTING WHEN PART ELEMENTS ARE FIRST
    SELECTED THEN RESETED, AND OPERATION CANCE
    
    HC50376   ADMIN    :
    NO NAME CANNOT BE RESAVED IN DATABASE
    
    HC50377   MODELS   :
    MESSAGE MODEL : MOVE NOT ALLOWED IN FUNCTION MODELS / MODIFY / REPLACE /
    TRANSLATE ( HC41466 )
    
    HC50383   MFGPROG  :
    APTSOURCE GENERATED BY CATMFG IS DIFFERENT FOR POCKETING IF TOOLPATH IS STORED
    ON OPERATION OR NOT.
    
    HC50387   MFGPROG  :
    IN MFGPROG, IF RAMPING IS USED AS APPROACH STRATEGY, RETRACT MACRO IS BADLY
    TAKEN INTO ACCOUNT.
    
    HC50389   MODELS   :
    MODELS - TRANSLATION OF CDM PARTS LEADS TO A WRONG RESULT APAR HC39377 NOT
    FIXED WITH G21 ACCORDING TO CUSTOMER
    
    HC50392   ADPEXTR  :
    UPDATE OF DETAIL VIEW LEADS ERROR IN MODEL UPDATE MESSAGE
    
    HC50397   MFGPROG  :
    IN 5X_FAC_ISOPARAM, EVEN IF NOTHING IS MODIFIED IN PART GEOMETRY, INTERPOL AXIS
    ARE REINITIALIZED.
    
    HC50400   SOLIDE   :
    SOLIDE : 'UNKNOWN ELEMENT TYPE' WHEN SELECTING A SKIN.
    
    HC50416   MFGPROG  :
    WRONG PATH FOR CIRCULAR APPROACH MACRO IN GLOBAL FLANK CONTOURING OPERATION.
    
    HC50426   MFGPROG  :
    TRAJECTORY IS COMPLETED THREE TIMES DURING REPLAY OF UDMO
    
    HC50432   MFGPROG  :
    FOR SOME OPERATIONS, APPROACH MACRO WITH TANGENT DIRECTION ARE INCORRECTLY
    REPLAYED.
    
    HC50439   SKETCHER :
    SKETCHER SOLIDS IN NO SHOW SHOW UP IN THE SKETCHER WINDOW WHEN IN THE SOLIDE
    FUNCTION
    
    HC50451   ANVISU   :
    ANVISU : GHOST LINES ARE DISPLAYED AT VISUALIZATION OF VON MISES RESULTS
    
    HC50453   PSN      :
    REGRESSION IN TIME NEEDED TO SELECT MODELS IN PSN
    
    HC50463   RULFILET :
    RULFILET RESULTS IN ERROR MESSAGE :   INVALID ADDRESS
    
    HC50490   CATWEB   :
    CGM GENERATED IS NOT ON SCALE FOR CATWEB LOCAL 2D VIEWER : ( SPECIFIC SUNOS )
    
    HC50493   SOLIDE   :
    SOLIDE / MODIFY / GEOMETRY / PARM SELECT FILLET AND CLICK EDIT BUTTON LEADS TO
    ABENDS10
    
    HC50502   MFGPROG  :
    DUPLICAT OF UDMO REFERENCING PARTERN LEADS TO INCOHERENT UDMO
    
    HC50505   MFGPROG  :
    CATMFG DOESN T RECOGNIZE VPM MODELS
    
    HC50527   ANMANAGE :
    ANMANAGE IMPORT WITH MERGE OPTION OF NASTRAN BULKDATA GIVES INCO RRECT MESH
    
    HC50534   MFGPROG  :
    MESSAGE NOT DELETED IN COMMENT PANEL IN PROGRAM TAB
    
    HC50538   SOLIDE   :
    FK SOLIDE + MODIFY + GEOMETRY + PARM SKIN CANNOT BE USED FOR SOLID CREATION
    
    HC50543   MFGPROG  :
    MIGRATION OF TOOLDATA BASE FROM 420 UP TO 421 LEADS TO UNUSABLE NEW DATABASE.
    
    HC50550   CATCDMA  :
    INTEROPABILITY BETWEEN VPM1.1 PTF6 AND CATIA V421R1
    
    HC50554   AUXVIEW2 :
    AUXVIEW2 : DIMENSION ASSOCIATIVITY IS LOST AT UPDATE WHEN MODELS FROM CDMA ARE
    MOVED WITH MODELS/MODIFY
    
    HC50559   MFGPROG  :
    OPTION ARE NOT MODAL
    
    HC50561   SOLIDE   :
    SOLIDE + UPDATE IS GETTING IMPOSSIBLE GEOMETRY ERROR
    
    HC50568   MFGPROG  :
    IDENTIFIER OF UDMO ARE NOT VISUALIZED IN UDMO PANEL
    
    HC50570   MFGPROG  :
    WRONG MANAGEMENT OF GLOBAL FEEDRATES IN GLOBAL FLANK CONTOURING OPERATIONS.
    
    HC50576   MFGPROG  :
    COPY OF MO LEADS TO ERROR IN COPY PASTE (9421) IF THE COPIED MO HAS A PARAMETER
    WHICH EXISTS IN THE RECEVING PO
    
    HC50579   MFGPROG  :
    IN MULTI-MODEL, TPS NOT BROKEN AFTER DESIGN CHANGES FOR
    GLOBAL_FLANK_CONTOURING, 5X_SIDE_CURVE AND 5X_TIP_CURVE
    
    HC50583   CATCDMA  :
    VPM improuvement for MML SKIN
    
    HC50586   PATHWAYS :
    INITIALIZATION FAILED ERROR USING PATHWAYS+ROUTING
    
    HC50588   MFGPROG  :
    GLOBAL FLANK CONTOURING/COMBINE MIXED : FANING IS GENERATED SYSTEMATICALY
    BETWEEN DRIVE SURFACES
    
    HC50591   ADPEXTR  :
    CENTER LINES ARE NOT CREATED IN THE ETRACTED VIEW WITH ERROR ERROR 20095 IN
    MODEL UPDATE
    
    HC50597   BENDPART :
    BENDPART .INCORRECT CALCULATION OF NEUTRAL FIBER PBL PART CREATE WRONG NEUTRAL
    FIBER --> HC42705
    
    HC50605   CATCDMA  :
    INTEROPABILITY PTF BETWEEN VPM1.1 AND CATIA V420R1
    
    HC50609   AUXVIEW2 :
    DIMENS2 : PERFORMANCE PROBLEM WHEN LOADING A START-UP MODEL IF THE SESSION IS
    NOT COMPLETE
    
    HC50613   E3MANAGE :
    CANNOT ANALYZE A SUPPORT SECTION IN DETAIL WORKSPACE
    
    HC50615   MFGPROG  :
    GLOBAL FLANK CONTOURING/COMBINE MIXED : CYLINDERS ARE MILLED IN COMBIN/TANTO
    INSTEAD OF COMBIN/PARELM
    
    HC50634   MONITIX  :
    SNAPSHOT tool does not work on SOLARIS 2.6 after changing the 3D WINDOW
    ROTATION AXIS
    
    HC50666   SOLIDE   :
    SOLIDE/OPERATN/UNION CPU LOOP
    
    HC50684   CATCDMA  :
    XCO SECURITY INTEROP PB BETWEEN VPM AND CATCDMA
    
    HC50687   MFGPROG  :
    NO SMART GEOMETRY HIGHLIGHTED IN ANALYSE GEOMETRY FOR CONTOURING OPERATION IN
    GEOMETRY NOT FOUND STATUS.
    
    HC50689   MFGPROG  :
    Pb of macro replay in wrong axis system
    
    HC50690   CATCDMA  :
    XCO SECURITY INTEROP PROBLEM BETWEEN VPM AND CATCDMA
    
    HC50702   MFGPROG  :
    THE OFFSETS ARE NOT RECOMPUTED WHEN ONE CHANGES THE TOOL IN PMA
    
    HC50709   MFGPROG  :
    IMPOSSIBILITY TO CREATE PATTERN AFTER HAVING UNSELECTED SOLID REDGE WITH NO
    BUTTON.
    
    HC50722   SURF1    :
    SURF2 / MODIFY / CRV CRV / ADD IN MODE REPLACE OF A SURFACE RESULTS IN ABEND
    U0104
    
    HC50726   AUXVIEW2 :
    AUXVIEW : HIDDEN CENTER LINES WILL BE DISPLAYED AS SOLID LINES
    
    HC50734   MFGPROG  :
    CONFUSOUS BEHAVIOR OF TPS IN CASE OF A MULTI-SELECTION
    
    HC50735   MFGPROG  :
    ABEND S11 WHEN SELECTING DRILLING POINTS WHITHOUT HAVING ENTERED PATTERN NAME
    DURING ITS CREATION.
    
    HC50745   PATHWAYS :
    HIGHLIGHT PROBLEM WITH PATHWAYS+NETWORK+MODIFY+LINKS (ECP remain dehighlighted
    and cannot be selected).
    
    HC50769   MFGPROG  :
    TDB migration does not work in environnement other than english
    
    HC50770   MFGPROG  :
    PART GEOMETRY IS ACTUALLY UPDATED ONLY AFTER THE SECOND EDITION/MODIFICATION OF
    PART GEOMETRY.
    
    HC50772   MFGPROG  :
    TDB Migration does not work in environnment other than english
    
    HC50794   ISO_EXTR :
    TEE IS NOT EXTRACTED CORRECTLY IN THE ISO
    
    HC50806   PATHWAYS :
    DECL UA001RT GII E3FCNR FORBMULT IGNORED IN SOME CASES.
    
    HC50817   CDM      :
    CANNOT UPDATE PART ATTRIBUTES IN CDMA
    
    HC50825   SW_DESGN :
    New delivery to complete the corrections of PTFs linked to APARs HC47781,
    HC47785 and HC47974 (and relatives to oth
    
    HC50829   CATBACK  :
    CATBACK FAILS TO PROCESS AN EXACT SOLID MODEL
    
    HC50838   MFGPROG  :
    INITIALISATION OF TOOL AXIS ON START POINT
    
    HC50848   CONV_DES :
    ACD : CV_SETUP : Attachment parts are duplicated when keyeing in parametric
    values.
    
    HC50862   DATABASE :
    ROLLBACK KO ON DBLFCAT IF AUTH R--R--R--
    
    HC50878   MODELS   :
    MODELS/COPY/ELEMENT : Coredump occurs when using a part from CATIA V5.
    
    HC50907   MFGPROG  :
    problem with TDB update 419-420 when no conical mill family exis t in it.
    
    HC50911   /NAV4D   :
    4DNAV : EXPORTING SESSIONS FROM 4DNAV TO CATIA is KO if export CATN4D_ICODE=1.
    
    HC50914   CURVE23D :
    CURVE2 : UNABLE TO CREATE LARGE RADIUS CIRCLES
    
    HC50934   AUXVIEW2 :
    AUXVIEW2 : BASIC SOFTWARE ERROR CREATING A SECTION VIEW
    
    HC50941   PLOT     :
    PLOT : PREVIEW AND PLOT OF *SOE WHEN HLR MODE CAN T BE PERFORMED, ON THE
    CONTRARY OF *SOM
    
    HC50944   FILE     :
    SETTING VISU MODE TO SHD LEADS TO A CPU LOOP FOR SPECIFIC MODEL
    
    HC50948   CATCDMA  :
    INTEROP PTF8 : definition of GLOBAL_ MA NDATORY IN THE PROFILE
    
    HC50952   SOLIDE   :
    SOLIDE / EXTRACT / EDGECRV LEADS TO ELEMENT TYPE IS INVALID WHEN SELECTING A
    CURVE ON A SOLID IN SHD VISU MODE
    
    HC50960   PSN      :
    ZONE FILITERING IS WRONG ONLY WHEN ZONE CONTAINS 0,0,0,0,0,0 POSITION MODELS
    ARE SELECTED WITH NOT ASSIGNED BOUNDIN
    
    HC50963   SW_DESGN :
    To deliver final corrections for APAR HC48363 and HC50089
    
    HC50979   COUPLER  :
    CADCAT - The COUPLER needs to crate two-part curve dimensions.
    
    HC51002   ANSOLID  :
    ANSOLID COMPUTE gives ERROR message  PROGRAM ERROR  in part disc retization step
    
    HC51005   E3INSTAL :
    E3INSTAL DELETE ELEMENT WITH MULTI-SEL *BNS CAUSES ALL BNS TO BE DELETED EVEN
    WHEN THEY ARE IN NO-SHOW OR NO-PICK M
    
    HC51009   FILE     :
    APAR FOR TESTING PTF BUILD IN 421-2 LEVEL
    
    HC51010   MFGPROG  :
    IMPOSSIBLE TO ASSOCIATE A DETAIL TO A TOOL OR ASSEMBLIE ON RELATIONNAL
    DATABASE, NO PROBLEM ON FLAT FILE
    
    HC51028   E3FORMBD :
    E3FORMBD CREATE BNS WITH WRONG LENGTH WHEN USING FINE OPTION (COARSE ONE IS
    CORRECT).
    
    HC51031   SOLIDE   :
    MISSING GEOMETRIAL SOLUTION ON FK SOLIDE / OPERATN / UNION
    
    HC51037   CATCDMA  :
    ABEND BEGAN TO OCCUR WITH CSB_VOXEL_SIZE
    
    HC51045   SOLIDE   :
    CPU-LOOP ON FK SOLIDE / OPERATN / DRAFT
    
    HC51053   MFGPROG  :
    MFGPROG/VNC direct bridge
    
    HC51061   FORMTOOL :
    FORMTOOL/ RELIMIT/ TRIM EL1 GENERATES ELEMENTS WHOSE COLOUR SEEMS TO CHANGE
    RANDOMLY USING SWITCHES ID OR NS
    
    HC51064   ANMESH   :
    RETURN CODE 4 IN ANMESH WHEN CREATING CONSTR_N ELEMENT IN HLR OR HRD
    VISUALIZATION MODE
    
    HC51072   ANVISU   :
    ANVISU : ACQUISITION OF non linear solution from XDB file give u nreferenced
    error number 20035 in C50ERR
    
    HC51091   BENDPART :
    BENDPART.STRAIGHT BEND WINDOW R-SETTING ALWAYS RESETS TO SPECIF OTHER CASE THAN
    HC49465.
    
    HC51097   MFGPROG  :
    Invalid address when selecting Part icon
    
    HC51103   PSN      :
    INCORRECT VOLUME VALUES WITH ADMCSB/ZONE/CREATE FUNCTION AFTER USING
    MODELS/MODIFY/REPLACE/TRANSLAT ON MODEL FROM P
    
    HC51110   MFGPROG  :
    UNABLE TO MODIFY TOOL ASSEMBLY ON A 5X ISOFAC
    
    HC51121   PSN      :
    ROLLBACK KO ON DBLFCAT IF AUTH R--R--R-- (3eme)
    
    HC51125   ANELFINI :
    ANELFINI : no visualization of FREACT nodes on 1D elements nodes having null
    length
    
    HC51129   MFGPROG  :
    RESIZE OF START POINT PANEL IMPOSSIBLE IN PROGRAM TAB
    
    HC51143   /NAV4D   :
    4DNAV - STUDIO RENDER : CUSTOMIZATION ON LAYER FILTERS.
    
    HC51151   SOLIDE   :
    SOLIDE / CREATE / COMPLEX / OFFSET OF A SKIN RESULTS IN ERROR : SKIN CANNOT
    BE USED FOR SOLID CREATION
    
    HC51169   AECMNGT  :
    DURING EDIT/TRANSFOR OF EQUIPMENT ASSEMBLY FROM PASSIVE TO ACTIV E THE AECID IS
    LOST
    
    HC51172   BEAM     :
    BEAM / CATALOG / MANAGE : RENAME CLASS DOES NOT WORK
    
    HC51181   SHM_AERO :
    SHM_AERO.ERROR DURING CREATION OF HOLE ON A CURVED FLANGE WITHOUT JOGGLE .
    
    HC51203   MFGPROG  :
    PROBLEM IN HIGHLIGHT OF CONTOURS IN PMP OPERATIONS
    
    HC51204   ANVISU   :
    CORRECTION REGRESSION SUR PLTEST GISPUB01
    
    HC51212   BENDPART :
    CHAMFER(OR FILLET) OPERATN ON BENDPART ELEMENT CANNOT BE DONE PROPERLY.
    
    HC51217   SOLIDE   :
    SOLIDE + MODIFY DOES NOT WORK CORRECTLY
    
    HC51218   PSN      :
    Publication of CATDMUsrMethod.h
    
    HC51227   ANMESH   :
    CORRECTION REGRESSIONS ON OCTREE MESHER
    
    HC51237   DATABASE :
    CATIA DOCUMENTS ARE UNREADABLE USING ISO CODE PAGE 8859-1 WITH
    CATCDMA.REMOTE_ACCESS='YES'
    
    HC51248   PLOT     :
    PLOT : WHEN ONE PRINTS SECTIONS, EVERY LINE IS PRINTED TIMES
    
    HC51253   ISO_EXTR :
    PARTS ON ONE END OF THE TEE ARE ORIENTED VERTICALLY WHILE ON THE OTHER END
    HORIZONTAL VALVES ARE NOT GETTING SPINDL
    
    HC51256   AUXVIEW2 :
    INSUFFICIENT MODEL SIZE / MODEL FULL PROBLEM WHEN SETTING RECOMMENDED VALUES
    FOR INDEX / DATA
    
    HC51265   ANMESH   :
    ANMESH : ON CYLINDRICAL SURFACE RETURNS INVALID ADDRESS (ERROR MESSAGE)
    
    HC51272   STUDIO   :
    STUDIO : RENDER IN 4DNAV IS KO WHEN TRYING TO RENDER A MAST MODEL
    
    HC51276   MFGPROG  :
    MFGPROG : BAD INITIALISATION OF TOOL AXIS FOR A DRILLING ON A PATTERN
    
    HC51291   SW_DESGN :
    APIs GJ7RMAT AND GJ7SPRT DELIVERED WITH HC45810 FAIL WITH RC=125 67
    
    HC51303   DIMENS2  :
    CREATE DIMENSION IN CHAIN MODE LEADS UNLIMITED EXTENSION LINES
    
    HC51332   LIMIT23D :
    QUALITY CHECK FOR LIMIT2 SKIN AND VOLUME
    
    HC51340   ISO_EXTR :
    DIMESIONING OF SUPPORTS WHEN DETAILED LEVEL DIMENSION IS NOT POSSIBLE
    
    HC51359   MFGPROG  :
    FINISH FEEDRATE NOT APPLIED IN FACING/HELICAL INWARD
    
    HC51366   TEXTD2   :
    TEXTD2/CREATE/TEXT/LEADER : the arrow does not touch internal radius
    
    HC51371   CATUNIT  :
    NCVERIF AND CATNC FAIL WITH A U0771 ABEND ON A MODEL CONVERTED FROM INCH TO MM
    BY CATUNIT
    
    HC51374   /NAV4D   :
    4DNAV : MOVE and RESET POSITION OR MOVE DO NOT WORK IN THE GOOD WAY. THE MOVER
    AXIS CHANGE THEIR POSITION.
    
    HC51383   SOLIDE   :
    ERROR 700 AFTER UPDATE OF ACTIVATED DRAFT
    
    HC51391   ISO_EXTR :
    WHEN ALL THE DIMENSION OPTIONS ARE DIABLED FOR AN ISO TYPE THEN THE BUTTERFLY
    VALVES ARE NOT OK IN THE ISO
    
    HC51394   STUDIO   :
    STUDIO : RENDER IN 4DNAV IS KO WHEN TRYING TO RENDER A MAST MODEL
    
    HC51403   SOLIDE   :
    FK SOLIDE / OPERATN / FILLET / EDGE : ABEND S11 ISWERK YTTNFI OPFIXC OPFIXA
    SOCTFR SOOPFE SOLCTX UNIOPE UNINSP OP
    
    HC51433   REPORTER :
    Area and Volume of Surfacic and Shell Plates are not extracted
    
    HC51464   AUXVIEW2 :
    AUXVIEW2 - DETAIL VIEW AT SCALE 2 HAS WRONG LOCATION - EXPECTED RESULT : THE
    VIEW IS DISPLAYED AT INDICATED POINT
    
    HC51474   KINEMAT  :
    NO KINEMATIC SETS FOUND ERROR WHEN READING A SESSION IN 4D NAV SESSION DOES
    CONTAIN KINEMATIC SETS
    
    HC51477   SW_DESGN :
    Error msg (invalid address or internal error) displayed when trying to replay
    Part Slaves during update.
    
    HC51493   MFGPROG  :
    Sequential Contouring MO does not replay TPS
    
    HC51494   PSN      :
    SECURITY PROBLEMS IN PSN WHEN APPLYING VIEWS ON TABLE
    
    HC51542   SKETCHER :
    ABEND S6 in Tools / sketcher
    
    HC51549   SKETCHER :
    ABENDS10 in tools / sketcher
    
    HC51559   E3INSTAL :
    INCORRECT RESULTS WHEN WRONG DATA IS PLACED IN SIMU DIRECTORY (DEPENDING ON THE
    COMPUTE OPTION CHOOSEN)
    
    HC51563   MFGPROG  :
    SS : CONDITION CODE 4 IN CATMFG IF CYCLE SYNTAX IS EDITED
    
    HC51573   MFGPROG  :
    FIRST FEED ON FP IS IGNORED IN POCKETING
    
    HC51579   MFGPROG  :
    TIP APPROACH CLEARANCE NOT RESPECTED ON CONTOURING
    
    HC51592   SOLIDE   :
    It is not possible to break a feature that has been used to define trim
    constraints
    
    HC51604   MFGPROG  :
    DRILLING UPDATE STATUS ON POINTS NOT WORKING
    
    HC51623   MFGPROG  :
    TPS NOT BROKEN ON MODIF PPWORDS FOR DRILLING OPERATION
    
    HC51627   SW_DESGN :
    ABEND S11 DURING PART/COPY/ADVANCED TRANSLATE FROM DU1206 TO DU1306
    
    HC51637   AUXVIEW2 :
    Centerlines are projected in a different layer than the other geometry with
    AUXVIEW2 - SPECIFIC HP
    
    HC51647   SKETCHER :
    SKETCHER DIMENSIONS WILL BE ERASED IF THE CURSOR IS DRAGG D DURING PLACEMENT
    
    HC51657   MFGPROG  :
    ERROR ON OPPOSITE TREATMENT FOR CONTOURING WITH LOCAL FEEDRATE
    
    HC51663   MFGPROG  :
    SS : DETAIL TOOL management is incomplete
    
    HC51671   /NAV4D   :
    4DNAV : TRYING TO FILE / PRINT FROM N4D ANY MODEL IN CGM FORMAT LEADS TO
    MIRRORED OUTPUT PREVIEW IS STILL OK
    
    HC51680   TUBING   :
    PIPING/MODIFY/MOVE WITH A DISTANCE DEFINED BY 2 POINTS & CANCEL BY THE NO KEY
    => THE PIPE DOES NOT GO BACK TO THE I
    
    HC51684   /NAV4D   :
    4DNAV : SECTION PLANE POSITION KO WHEN RELOADED FROM A SCENE SPECIFIC TO INCH
    UNIT.
    
    HC51685   TUBING   :
    IN TUBING, TRYING TO GET OUT OF A DETAIL SPACE GIVES THE ERROR : CURRENT
    WORKSPACE IS INVALID.
    
    HC51690   SOLIDE   :
    SOLIDE OPERATN DRAFT on a solid composed by a close primitive on which a
    thickness has been applied leads to an ABE
    
    HC51701   GRAB     :
    GRAB : SCREEN GRAB EXECUTABLE IS NOT WORKING
    
    HC51713   SOLIDE   :
    SOLIDE / UPDATE : Abend S11
    
    HC51750   RW_DES   :
    RACEWAY - MAXLENGTH AND MINLENGTH VALUE ARE WRONG WHEN UNITS=MM.
    
    HC51770   SHAPE    :
    SHAPE / OPERATE / UNION gives Abend S11 S011
    
    HC51775   /NAV4D   :
    4DNAV - STUDIO RENDER : NO OR BAD VIZUALISATION IN STUDIO RENDER OF MODELS FROM
    4DNAV.
    
    HC51782   /NAV4D   :
    4DNAV : PRINT / UNABLE TO CHOOSE MONOCHROME OPTION
    
    HC51792   SKETCHER :
    SKETCHER BREAKING/MODIFYING A CIRCULAR CONTOUR SOLID NOT MODIFY
    
    HC51822   SW_DESGN :
    PART / MODIFY - SECTION of profile with endtype P1 needs UPDATE for the
    modification to be done
    
    HC51824   MFGPROG  :
    PROPERTIES NOT AVAILABLE FOR DRILLING MO AFTER DESIGN CHANGES
    
    HC51831   FILE     :
    General reliability of sdnf translation.
    
    HC51846   FITTING  :
    LOOP IN NAV4D WHEN TRYING TO OPEN MODEL (FITTING SESSION)
    
    HC51878   ANELFINI :
    ANELFINI DEFINE-DISP COMBINED gives error message : 19301 PEZMTO TOO SMALL
    
    HC51898   MFGPROG  :
    MFGPROG / MAD. MESSAGE  NC MODEL INTERNAL ERROR  WHEN SAVING THE FINAL PART
    
    HC51904   CATITF   :
    CATITF REPORT OVERWRITTEN
    
    HC51910   CURVE1   :
    CURVE1 PROJECT BETWEEN A SMALL ARC CURVE AND A SURFACE LEADS TO PROJECTION DOES
    NOT EXIST ERROR MESSAGE
    
    HC51912   MFGPROG  :
    MFGPROG : ROUGHING CYCLE. SOME PASSES ARE MISSED.
    
    HC51920   MFGPROG  :
    MFGPROG : POCKETTING CYCLE - THE RETRACT MACRO GIVES A BAD RESULT
    
    HC51943   ANMANAGE :
    ANMANAGE EXPORT : management of numbering of continuation cards in exported
    NASTRAN bulkdata file
    
    HC51953   MFGPROG  :
    MFGPROG-INSERT-HOLE PATTERN-ADD THROUGH FILTER DOES NOT WORK
    
    HC51958   KINEMAT  :
    4DNAV + TOOLS + KINEMATIC : LIST OF KINEMATIC SETS MOTIF BOX -> THE LAST SET IN
    THE BOX IS ALWAYS SELECTED FOR RU
    
    HC51978   REPORTER :
    REPORTER IS BUGGY WHEN GROUPING IS USED
    
    HC51981   AUXVIEW2 :
    Not all elements are generated in a detail view of section cut created with
    AUXVIEW2 / USE / NEW / DETAIL VIEW
    
    HC51992   MFGPROG  :
    MFGPROG/PMA : BREACKTHROUGH OPTION NOT SHOWN UNDER PROCESS
    
    HC52018   AEC_TEXT :
    ATS WITH BALLOONS AND LEADERS ARE BEING PLACED INCORRECTLY
    
    HC52042   GSCCPS   :
    GSCCPS leads to error. Model specific problem.
    
    HC52100   ADPEXTR  :
    TECHNOLOGY LOST WHEN AN EQUIPMENT IS A DITTO CONTAINING SOLIDM
    
    HC52141   ST_FRAME :
    MULTI MODEL LINK FAILS IN ST-FRAME
    
    HC52146   PSN      :
    ZONE FILTERING IS WRONG WHEN ACTIVATE FULLY IN AND ZONE CONTAINING 0,0,0
    POSITION WITH A NON ENGENEERING MODEL
    
    HC52171   MFGPROG  :
    5 AXIS GUIDED CUTTING - TOOL PATH DOES NOT MACHINE THE WHOLE PART SURFACE.
    
    HC52251   CSB      :
    CSB / READ : msg 'variable doesn't exist'
    
    HC52302   CSB      :
    CSB / READ msg 'element not in stack'
    
    HC52324   SOLIDE   :
    This APAR has been opened to correct complementary problems linked to SGI APAR
    HC46343.
    
    HC52336   SOLIDE   :
    ABENDU101 on FK SOLIDE with a temporary save / restore model
    
    HC52341   SKETCHER :
    Exiting the sketcher after relimiting a prism contour leads to an ERROR 709
    when selecting the YES : NO REROUTE cap
    
    HC52358   ANAERO   :
    ANAERO : SOLVE LINE LIMITED TO 1000 LINES
    
    HC52364   MFGPROG  :
    SMART GEO NOT HIGHLIGHTED IN ANALYSE TOOLKIT WITH A PARTICULAR FILTER APPLIED.
    
    HC52451   /NAV4D   :
    4DNAV : OPENING MODELS WITH REFERENCED AXIS GIVES THE SAME RESULT THAT WITH
    ABSOLUTE AXIS.
    
    HC52677   SKETCHER :
    SKETCHER RELIMIT NON INTERSECTED ELEMENT SUPPORTS ERROR
    
    HC52754   AUXVIEW2 :
    No hidden line shown on the wiew after AUXVIEW2/UPDATE
    
    


    Reader's Comments

    Program Directory for CATIA Solutions Version 4 Release 2.2

    You may use this form to comment about this document, its organization, or subject matter with the understanding that IBM may use or distribute whatever information you supply in any way it believes appropriate without incurring any obligation to you.

    For each of the topics below please indicate your satisfaction level by circling your choice from the rating scale. If a statement does not apply, please circle N.
    RATING SCALE
      very                                 very          not
    satisfied  <=====================>  dissatisfied  applicable
        1        2        3        4         5            N
    

      Satisfaction
    Ease of product installation 1 2 3 4 5 N
    Contents of program directory 1 2 3 4 5 N
    Installation Verification Programs 1 2 3 4 5 N
    Time to install the product 1 2 3 4 5 N
    Readability and organization of program directory tasks 1 2 3 4 5 N
    Necessity of all installation tasks 1 2 3 4 5 N
    Accuracy of the definition of the installation tasks 1 2 3 4 5 N
    Technical level of the installation tasks 1 2 3 4 5 N
    Ease of getting the system into production after installation 1 2 3 4 5 N

    Did you order this product as an independent product or as part of a package?

    Independent
    Package

    If this product was ordered as part of a package, what type of package was ordered?

    CustomPac

    FunctionPac
    SystemPac

    System Delivery Offering (SDO)

    Other - Please specify type: . . . . . . . . . . . . . . . . .

     

    Is this the first time your organization has installed this product?

    Yes
    No
     

    Were the people who did the installation experienced with the installation of AIX products?

    Yes
    No
     

    If yes, how many years? __

    If you have any comments to make about your ratings above, or any other aspect of the product installation, please list them below:

    ____________________________________________________________

    ____________________________________________________________

    ____________________________________________________________

    ____________________________________________________________

    ____________________________________________________________

    ____________________________________________________________

    ____________________________________________________________

    ____________________________________________________________

    ____________________________________________________________

    ____________________________________________________________

    ____________________________________________________________

    ____________________________________________________________

    Please provide the following contact information:

    ____________________________________________________________
    Name and Job Title
    ____________________________________________________________
    Organization
    ____________________________________________________________
     
    ____________________________________________________________
    Address
    ____________________________________________________________
    Telephone

    Thank you for your participation.

    Please send the completed form to (or give to your IBM representative who will forward it to the CATIA® Solutions Development group):

    IBM Eurocoordination
    Engineering Technical Solutions
    Tour Descartes CEDEX 50
    2, Avenue Gambetta
    92066 Paris la Defense
    FRANCE